Cisco Optical Network Planner Configuration Guide, Releases 26.x.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Optical Network Planner Configuration Guide, Releases 26.x.x
Updated: March 10, 2026
Want to summarize with AI?
Log inTeaches you how to add new pluggables, alarm cables and 100G client bandwidth licenses to BoM. Instructs you on the necessary steps to perform this task effectively and ensure proper network configuration.
Use this procedure to add new pluggables, alarm cables, and 100G client bandwidth licenses to an existing BoM for the NCS 1004 and NCS 4000 platforms.
Open the network you want to update.
Analyze the network by choosing Network > Analyze.
NoteEnsure the network is successfully analyzed before proceeding.
Click the BOM tab.
Start adding new items:
Specify the details:
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.