Teaches you how to modify section properties. Follow these detailed step-by-step instructions carefully to ensure the specific configuration is applied correctly and securely within your network.
Cisco Optical Network Planner Configuration Guide, Releases 26.x.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Optical Network Planner Configuration Guide, Releases 26.x.x
Updated: March 10, 2026
Want to summarize with AI?
Log inTeaches you how to modify section properties. Follow these detailed step-by-step instructions carefully to ensure the specific configuration is applied correctly and securely within your network.
Open the network where you want to modify the section properties.
Choose Network > Entity Editor.
In the Entity Editor window, click the Services tab.
Expand Waves, Media Channels or Circuits.
Navigate to a trail and select a section within the trail.
Modify the section properties.
The section and the trail have the same properties. See these references for descriptions of the properties.
Click Update.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.