Overview
Teaches you how to modify network properties. Update the network configuration properties to accommodate deployment, licensing, simulation, and advanced optical requirements.
Update the network configuration properties to accommodate deployment, licensing, simulation, and advanced optical requirements.
| Feature Name |
Release Information |
Description |
|---|---|---|
| CONC licenses support |
Cisco ONP Release 26.1.1 |
Two new network-level properties, CONC License Package and CONC Term Preference, have been introduced to the Network application configuration category. Depending on the selected properties, the following licenses may be included in the BOM: CONC RTM ESS SM, CONC RTM SPC SM, CONC RTM API SM, CONC RTM ESS LG, CONC RTM SPC LG, and CONC RTM API LG. This feature allows you to identify and order the necessary COSM and CONC licenses for your comprehensive Optical Automation Software (OAS) solution based on the network configuration. |
| Cisco ONP BoM based on license offer structure |
Cisco ONP Release 26.1.1 |
Cisco ONP introduces a network-level Licensing Model option within the Bill of Materials category. You can select between Smart Licensed and Perpetual licensing models for your deployment. This feature is available on the NCS 1010, NCS 1014, NCS 1001, NCS 2000 4K-1K-2K SSON networks. The generated BoM will accurately represent the hardware, software, and licenses that can be ordered for the chosen Authorize-to-Order (ATO) bundle. This enhancement ensures that the BoM aligns with your specific licensing needs, allowing for flexible and precise license selection within Cisco ONP. Consequently, order accuracy and compliance with Cisco’s licensing models are enhanced, offering greater flexibility and transparency when configuring solutions in Cisco Commerce Workspace (CCW). |
| NCS1K14-FAN-P progrmmable fan for NCS 1014 |
Cisco ONP Release 26.1.1 |
The new NCS1K14-FAN-P programmable fan reduces power use and improves cooling efficiency by adjusting its speed to match the card load in the NCS 1014 chassis. It increases speed automatically when the chassis drives higher bandwidth or thermal demand, keeping airflow aligned with power requirements. Choose the programmable fan from the new NCS1014 Chassis Fan field at the network level. |
| Feature Name |
Release Information |
Description |
|---|---|---|
| New Bandwidth Properties |
Cisco ONP Release 5.1 |
Cisco ONP introduces the Statistical Simulation Sigma, Statistical Simulation Margin Sigma, and OSNR Resolution Bandwidth properties in this release. When the ideal OSNR values calculated by Cisco ONP are not feasible to be used at the time of deployment, you can modify the values for these properties to customize OSNR margin, power margin, and G-OSNR values to fix the fiber span issues. |
| New Network Level Properties |
Cisco ONP Release 5.1 |
Three new Network Level properties are introduced to enable you to customize the core operations of an NCS 2000 Network. These operations ran in the background in the earlier releases. The new properties available under Core Operations as check boxes are:
|
| BOM Customization for the UCS-based SVO Server Application |
Cisco ONP Release 5.1 |
From this release onwards, the BOM does not include any UCS-based SVO server information. It is expected that you add the server PID and quantities manually. Cisco ONP prompts you to add the server by displaying the message "UCS server is not billed in BoM, please add it as needed." in the Messages tab of the Elements tab. |
| Feature Name |
Release Information |
Description |
|---|---|---|
| Improved Optical Results |
Cisco ONP Release 24.3.1 |
The new network-level properties introduced improve the accuracy of the optical results.
Also, Cisco ONP sets PSD and drop attenuation to specific values for the CCMD-16 LC card connected to the ports of the OLT-E-C, to achieve optimal RX power for the circuits. |
| Skip Routing Failures in NCS 2000 Network Analysis |
Cisco ONP Release 24.3.1 |
A new Continue Analysis On Routing Failure check box is introduced to improve network analysis reliability for larger NCS 2000 networks. When a routing failure occurs, this enhancement moves the network to Partially Analysed mode, and move the network to Design or Upgrade mode to edit properties and correct routing. After the analysis,
This approach prevents a single failure from failing the entire analysis, isolating specific issues to enhance troubleshooting. |
| Feature Name |
Release Information |
Description |
|---|---|---|
| New Network Level Properties |
Cisco ONP Release 5.2 |
New Network Level properties are introduced under Advanced Optical Settings for NCS 1010 network. You have the flexibility to define custom values for the following properties for the Raman span and validate the optical circuit feasibility.
|
Follow these steps to modify the properties of the network.
Before you begin
Log in to the Cisco ONP web interface.Procedure
| 1. | Open the network where you want to modify the network properties. |
|
| 2. | Choose .
Alternatively, click the network name in the network tree, and click
Show Advanced Properties displayed under the network tree.
|
|
| 3. | In the Entity Editor window, click the Site tab. |
|
| 4. | Click the network name, and modify the properties in the right pane. For the property descriptions, refer to: |
|
| 5. | Click Update. |