Cisco Optical Network Planner Configuration Guide, Releases 26.x.x

PDF

Add new pluggables, alarm cables and 100G client bandwidth licenses to BoM

Updated: March 9, 2026

Want to summarize with AI?

Log in

Overview

Teaches you how to add new pluggables, alarm cables and 100G client bandwidth licenses to BoM. Instructs you on the necessary steps to perform this task effectively and ensure proper network configuration.

Use this procedure to add new pluggables, alarm cables, and 100G client bandwidth licenses to an existing BoM for the NCS 1004 and NCS 4000 platforms.

Before you begin

Log in to the Cisco ONP web interface.

Procedure

1.

Open the network you want to update.

2.

Analyze the network by choosing Network > Analyze.

Note

Ensure the network is successfully analyzed before proceeding.
3.

Click the BOM tab.
4.

Start adding new items:

  1. Click Add.

The New dialog box opens.
5.

Specify the details:

  1. Enter the Cisco part number of the pluggable, alarm cable, or 100G bandwidth license in the Cisco Part Number field.

  2. Click Add to confirm the additions.

The new pluggables, alarm cables, or 100G bandwidth licenses are now listed in the BoM.