Cisco Optical Network Planner Configuration Guide, Releases 26.x.x

PDF

Modify Flexgrid properties

Want to summarize with AI?

Log in

Overview

Teaches you how to modify Flexgrid properties. Follow these detailed step-by-step instructions carefully to ensure the specific configuration is applied correctly and securely within your network.

Follow these steps to modify the properties of the optical subnet.

Procedure

1.

Open the network where you want to modify the optical subnet properties.

2.

In the network tree, choose Subnet > OpticalSubnet and select the required Flexgrid.

3.

Click the optical subnet name, and modify the properties.

This table describes various general properties of an optical subnet.

Table 1. General properties of an optical subnet

Property

Platform

Description

Name

NCS 2000

NCS 1010

Name of the optical subnet

СBand Rules

NCS 2000

NCS 1010

Same as the name of the optical subnet

Spectral Density

NCS 2000

NCS 1010

Spectral Density of the optical subnet

Max Number Of Channels

NCS 2000

NCS 1010

Displays based on network demand.

Fiber links

NCS 2000

NCS 1010

Available fibers in the networks

Current subnet

NCS 2000

NCS 1010

Check box for the current subnet

Band Type

NCS 2000

NCS 1010

Displays the band type for the subnet

Auto

NCS 2000

NCS 1010

Check box to enable Basic Auto SD selection for the optical subnet.