Describes the multicast traffic scheduling feature, which enables granular control of multicast data by applying egress queuing parameters such as shaping and priority. It explains how scheduling occurs during the second pass of egress processing to ensure efficient handling for different receivers.
Multicast traffic scheduling on egress queues is a QoS traffic queuing feature that
-
schedules multicast traffic in the second pass of egress processing
-
applies egress queuing policy parameters such as shaping, priority, and queuing on multicast traffic, and
-
enables granular control of multicast traffic per egress queue.
| Feature Name |
Release Information |
Feature Description |
|---|---|---|
| Multicast Traffic Scheduling on Egress Queues |
Release 26.2.1 |
Introduced in this release on: Fixed Systems (8700 [ASIC: K100]) (select variants only*) This feature requires egress feature capability on supported platforms. Use the hw-module profile edge-mode CLI command to enable the feature. The feature introduces these changes: CLI:
*This feature is now supported on:
|
| Multicast Traffic Scheduling on Egress Queues |
Release 24.3.1 |
Introduced in this release on: Modular Systems (8800 [LC ASIC:ASIC: P100])(select variants only*) We have introduced multicast traffic scheduling on egress queues. Now you can have more granular control over multicast traffic by applying egress queuing policy map parameters such as traffic shaping, priority, and queuing, to each egress queue. This allows for specific management of multicast traffic for different receivers, ensuring efficient and prioritized handling of multicast data. *This feature is enabled by default and supported on:
|