Information about configuring integration settings. Integration settings are useful when firewalls or other rules exist between Catalyst Center and any third-party apps that need to reach the Catalyst Center platform.
In cases where firewalls or other rules exist between Catalyst Center and any third-party apps that need to reach the Catalyst Center platform, you must configure Integration Settings. These cases occur when the IP address of Catalyst Center is internally mapped to another IP address that connects to the internet or an external network.
After a backup and restore of Catalyst Center, you need to access the Integration Settings page and update (if necessary) the Callback URL Host Name or IP Address using this procedure.
Before you begin
You have installed the Catalyst Center platform.
Procedure
| 1. | From the main menu, choose . |
|
| 2. | Enter the Callback URL Host Name or IP Address that the third-party app needs to connect to when communicating with the Catalyst Center platform.
|
|
| 3. | Click Apply. |