Cisco Unified CME 7.1 Supported Firmware, Platforms, Memory, and Voice Products

Available Languages

Updated:May 11, 2010

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Revised: December 22, 2012

About Cisco Unified Communications Manager Express (Cisco Unified CME)
Documentation	See Cisco Unified CME product documentation.
Cisco IOS Compatibility	Other Cisco IOS software releases may inherit Cisco Unified CME 7.1. To get a list of Cisco IOS software releases that support Cisco Unified CME 7.1, go to Feature Navigator.
Downloads	To download Cisco Unified CME software and phone firmware files, go to the Cisco Software Download site.
DDTS Information	To find the latest Cisco Unified CME DDTS information, go to Bug Toolkit and search by product, for Cisco Unified Communications Manager Express (Cisco Unified CME).

Important Information about Configuring Cisco Unified IP Phone Support

· When configuring the load command:

- In Cisco Unified CME 7.1 and earlier versions, do not include the .sbin or .loads file suffix except for the Cisco ATA and Cisco Unified IP Phone 7905 and 7912.

- In Cisco Unified CME 7.1 and later versions, use the complete filename, including the file suffix, when you configure the load command for phone firmware versions later than version 8-2-2 for all phone types.

· When configuring the load command for IP phones such as the Cisco Unified IP Phone 7906G, 7911G, 7941G, 7941GE, 7961G, 7961GE, 7970G, and 7971G, configure only the filenames that are marked with an asterisk (*) in the table below.

· Only SCCP phones can be configured as agent phones for Unified CCX 5.0 in Cisco Unified CME 4.2 and later versions. The Cisco VG224 Analog Phone Gateway and analog and SIP phones are supported as usual in Cisco Unified CME, however, not as Unified CCX agent phones.

Cisco Unified IP Phone Support

Device Type

SCCP Firmware Filename

SIP Firmware Filename

Comments

Cisco ATA-186

ATA030203SCCP051201A.zup

ATA030200SIP041111A.zup

Cisco ATA-188

ATA030203SCCP051201A.zup

ATA030200SIP041111A.zup

Cisco VG350

15.2(4)M

Cisco VG202

12.4(24)T

Cisco VG204

12.4(24)T

Cisco VG224

12.4(24)T

SCCP analog ports supported with Cisco IOS Software Release 12.4(9)T and later. For configuration information, see SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways.

Cisco IP Communicator

Cisco IP Communicator v 2.0(2) and higher supported

Cisco Unified IP Phone 3911

SIP3951.8-1-1*

Cisco Unified IP Phone 7902

CP7902080002SCCP060817A.sbin

Cisco Unified IP Phone 7905G

CP7905080002SCCP060817A.sbin

Signed image

CP7905080002SCCP060817A.zup

CP7905080001SIP060412A.zup

Unsigned image

Cisco Unified IP Phone 7906G and 7911G

apps11.8-4-1-23.sbn

jar11sccp.8-4-1-23.sbn

cnu11.8-4-1-23.sbn

cvm11sccp.8-4-1-23.sbn

dsp11.8-4-1-23.sbn

SCCP11.8-4-2S.loads*

term06.default.loads

term11.default.loads

apps11.8-4-1-23.sbn

cnu11.8-4-1-23.sbn

cvm11sip.8-4-1-23.sbn

dsp11.8-4-1-23.sbn

jar11sip.8-4-1-23.sbn

SIP11.8-4-2S.loads*

term06.default.loads

term11.default.loads

Cisco Unified IP Phone 7910

P00405000700.sbn

Signed image

P00405000700.bin

Unsigned image

Cisco Unified IP Phone 7912G

CP7912080003SCCP070409A.sbin

CP7912080001SIP060412A.sbin

Cisco Unified IP Phone Expansion Module 7914

S00105000300.sbn

Cisco Unified IP Phone Expansion Module 7915

B015-1-0-3.sbn

To support a 7915 or 7916 expansion module, IP phones must have firmware 8-3-5 or a later version. The 7915 and 7916 expansion modules are supported only on the 7962, 7965, and 7975.

Cisco Unified IP Phone Expansion Module 7916

B016-1-0-3.sbn

To support a 7915 or 7916 expansion module, IP phones must have firmware 8-3-5 or a later version. The 7915 and 7916 expansion modules are supported only on the 7962, 7965, and 7975.

Cisco Unified Wireless IP Phone 7920, 7921 and 7925

See software download site for latest firmware version.

Cisco Unified IP Phone 7931G

apps31.8-4-1-23.sbn

cnu31.8-4-1-23.sbn

cvm31sccp.8-4-1-23.sbn

dsp31.8-4-1-23.sbn

jar31sccp.8-4-1-23.sbn

SCCP31.8-4-2S.loads*

term31.default.loads

Cisco Unified IP Conference Station 7935

P00503021500.bin

Cisco Unified IP Conference Station 7936 and 7937G

See software download site for latest firmware version.

Cisco Unified IP Phone 7940G and 7960G

P00308000500.loads*
P00308000500.sb2
P00308000500.sbn

P0S3-08-6-02.loads*
P0S3-08-6-02.sb2
P0S3-08-6-02.sbn

Cisco Unified IP Phone 7941G and
7941G-GE

apps41.8-4-1-23.sbn

cnu41.8-4-1-23.sbn

cvm41sccp.8-4-1-23.sbn

dsp41.8-4-1-23.sbn

jar41sccp.8-4-1-23.sbn

SCCP41.8-4-2S.loads*

term41.default.loads

term61.default.loads

apps41.8-4-1-23.sbn

cnu41.8-4-1-23.sbn

cvm41sip.8-4-1-23.sbn

dsp41.8-4-1-23.sbn

jar41sip.8-4-1-23.sbn

SIP41.8-4-2S.loads*

term41.default.loads

term61.default.loads

Cisco Unified IP Phone 7942G and 7962G

jar42sccp.8-4-1-23.sbn

apps42.8-4-1-23.sbn

SCCP42.8-4-2S.loads*

cnu42.8-4-1-23.sbn

cvm42sccp.8-4-1-23.sbn

dsp42.8-4-1-23.sbn

term42.default.loads

term62.default.loads

apps42.8-4-1-23.sbn

cnu42.8-4-1-23.sbn

cvm42sip.8-4-1-23.sbn

dsp42.8-4-1-23.sbn

jar42sip.8-4-1-23.sbn

SIP42.8-4-2S.loads*

term42.default.loads

term62.default.loads

Cisco Unified IP Phone 7945G and 7965G

cnu45.8-4-1-23.sbn

cvm45sccp.8-4-1-23.sbn

apps45.8-4-1-23.sbn

dsp45.8-4-1-23.sbn

jar45sccp.8-4-1-23.sbn

SCCP45.8-4-2S.loads*

term45.default.loads

term65.default.loads

apps45.8-4-1-23.sbn

cnu45.8-4-1-23.sbn

cvm45sip.8-4-1-23.sbn

dsp45.8-4-1-23.sbn

jar45sip.8-4-1-23.sbn

SIP45.8-4-2S.loads*

term45.default.loads

term65.default.loads

Cisco Unified IP Phone 7961G and 7961G-GE

apps41.8-4-1-23.sbn

cnu41.8-4-1-23.sbn

cvm41sccp.8-4-1-23.sbn

dsp41.8-4-1-23.sbn

jar41sccp.8-4-1-23.sbn

SCCP41.8-4-2S.loads*

term41.default.loads

term61.default.loads

apps41.8-4-1-23.sbn

cnu41.8-4-1-23.sbn

cvm41sip.8-4-1-23.sbn

dsp41.8-4-1-23.sbn

jar41sip.8-4-1-23.sbn

SIP41.8-4-2S.loads*

term41.default.loads

term61.default.loads

Cisco Unified IP Phone 7970G and 7971G

apps70.8-4-1-23.sbn

cnu70.8-4-1-23.sbn

cvm70sccp.8-4-1-23.sbn

dsp70.8-4-1-23.sbn

jar70sccp.8-4-1-23.sbn

SCCP70.8-4-2S.loads*

term70.default.loads

term71.default.loads

apps70.8-4-1-23.sbn

cnu70.8-4-1-23.sbn

cvm70sip.8-4-1-23.sbn

dsp70.8-4-1-23.sbn

jar70sip.8-4-1-23.sbn

SIP70.8-4-2S.loads*

term70.default.loads

term71.default.loads

For configuration information, see
Cisco Unified CME with the Cisco 7970 Color IP Phone Configuration Example

Cisco Unified IP Phone 7975G

apps75.8-4-1-23.sbn

cnu75.8-4-1-23.sbn

cvm75sccp.8-4-1-23.sbn

dsp75.8-4-1-23.sbn

jar75sccp.8-4-1-23.sbn

SCCP75.8-4-2S.loads*

term75.default.loads

apps75.8-4-1-23.sbn

cnu75.8-4-1-23.sbn

cvm75sip.8-4-1-23.sbn

dsp75.8-4-1-23.sbn

jar75sip.8-4-1-23.sbn

SIP75.8-4-2S.loads*

term75.default.loads

Cisco Unified IP Phone 7985G

See software download site for latest firmware version.

Cisco Unified Video Advantage

Cisco Unified Video Advantage 1.0(2), 2.0 and higher supported with Cisco Unified IP Phone 7931, 794X, 796X, and 797X, and Cisco IP Communicator.

Supported Platforms and Memory Specifications: SCCP IP Phones*
Cisco Platform	Maximum Total¹ IP Phones	Maximum SCCP IP Phones	Maximum Total Virtual Ports (dns)	Recommended DRAM	Recommended Flash Memory
Cisco IAD 2430	12	12	120	256	128
Cisco 1861	12	12	48	256	128
Cisco 2801	25	25	120	256	128
Cisco 2811	35	35	144	256	128
Cisco 2821	50	50	192	256	128
Cisco 2851	100	100	288	384	128
Cisco 2901	35	35	200	512	256
Cisco 2911	50	50	300	512	256
Cisco 2921	100	100	400	512	256
Cisco 2951	150	150	500	512	256
Cisco 3270	48	48	240	256	64 (fixed)
Cisco 3825	175	175	500	384	128
Cisco 3845	250	250	720	384	128
Cisco 3925	250**	250**	600	1GB	256
Cisco 3925E	400	400	1100	1GB	256
Cisco 3945	350**	350**	900	1GB	256
Cisco 3945E	450	450	1200	1GB	256
* These memory recommendations and maximum numbers of IP phones are for common Cisco Unified CME configurations only. Systems with large numbers of phones and complex configurations may not work on all platforms and can require additional memory or a higher performance platform. ** At FCS, the 200 (3925) and 300 (3945) phones are supported. The higher numbers will become available in a post-FCS 15.0.1M rebuild 1. Total number of connected IP phones cannot exceed Maximum Total listed including SCCP and SIP phones on the same router.

Supported Platforms and Memory Specifications: SIP IP Phones*
Cisco Platform	Maximum Total¹ IP Phones	Maximum SIP IP Phones	Maximum Total Virtual Ports	Recommended DRAM	Recommended Flash Memory
Cisco IAD 2430	25	NA	NA	256	128
Cisco 1861	15	15	48	256	128
Cisco 2801	25	25	120	256	128
Cisco 2811	35	25	144	256	128
Cisco 2821	50	50	192	256	128
Cisco 2851	100	100	288	384	128
Cisco 3825	175	175	500	384	128
Cisco 3845	250	250	720	384	128
* These memory recommendations and maximum numbers of IP phones are for common Cisco Unified CME configurations only. Systems with large numbers of phones and complex configurations may not work on all platforms and can require additional memory or a higher performance platform. 1. Total number of connected IP phones cannot exceed Maximum Total listed including SCCP and SIP phones on the same router.

Compatible Voice Products
Product Name	Version	Comments
Cisco Customer Response Solutions (CRS) with Cisco Unified Contact Center Express (Unified CCX)	--	Interoperability between Cisco Unified CME and Cisco CRS with Cisco Unified CCX is supported as of Cisco IOS Release 12.4(11)XW2. To determine supported product version combinations for Cisco Unified CCX and Cisco Unified CME, sorted by the Cisco Unified CCX version, see the Cisco Unified Contact Center Express SW and HW Compatibility Guide.
Cisco Unified Communications Manager	--	See the Cisco Unified Communications Manager compatibility information.
Cisco Unified CME Telephony Service Provider (TSP)	2.2.0.4	Compatible with Cisco Unified CME 7.0 using Cisco IOS Release 12.4(20)T1 or a later release. Provides support for Windows Vista.
Cisco Unity	--	See SCCP and SIP compatibility matrices.
Cisco Unity Express	--	See the Cisco Unity Express Compatibility matrix.
Cisco BTS 10200 Softswitch	3.2.(0)V04	Verified with H.323 trunking.
Cisco PGW 2200	9.4.1	Verified with SIP trunking.
Cisco VG224	Cisco IOS Release 12.4(9)T or 12.4(11)T	Verified with SCCP analog ports.