Cisco C9550 Series Smart Switches Hardware Installation Guide

Shipping box contents

Updated: July 17, 2026

Want to summarize with AI?

Lists the contents that ships along with your Cisco C9550 Series Smart switches.

The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.

Note

Verify that you have received these items. If any item is missing or damaged, contact your Cisco representative or reseller for instructions.

Table 1. Shipping box contents
Item	Quantity
Cisco C9550 Series Smart Switch with optional network module¹	1
10 pan-head 0.625" long screws	4
12 pan-head 0.50" long screws	4
19-inch mounting brackets	2
8 Phillips flat-head 0.312" long screws	8
Cable guides	2
Ground lug	1
M4.0 x 20mm Phillips pan-head screws (Black color)	2
M4.0 x 8mm Phillips pan-head screws	2
Product documentation and compliance document	1
(Optional) AC power cord ²	1
(Optional) RJ-45 console cable¹	1
(Optional) USB console cable¹	1

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.