Cisco Umbrella SIG Upgrade Guide to Cisco Secure Access

PDF

Cisco Umbrella SIG Upgrade Guide to Cisco Secure Access

Manage Umbrella Certificates

Want to summarize with AI?

Log in

Overview on installing the Umbrella Root Certificate in Secure Access.


Once you complete the Upgrade, Umbrella's root certificate and your CA signed root certificate are imported to Secure Access and used to decrypt web traffic. You can still edit and delete the certificates in Umbrella. However, to add or renew certificates, you must log in to Secure Access. Refer to the next topic for instructions on adding a certificate in Secure Access.


Install Umbrella Root Certificate

The procedure on this page describes how to download and install the root certificate in Secure Access if your Umbrella root certificate is expiring, or you need to install a new root certificate. Existing and new certificates are used for all Umbrella and Secure Access traffic.

When upgrading from Umbrella SIG to Secure Access, you will continue to use the Umbrella root certificate. Although the Secure Access User Guide refers to the Secure Access root certificate, you will use the Umbrella root certificate instead. In the documentation, replace any instance of Cisco_Secure_Access_Root_CA.cer with Cisco_Umbrella_Root_CA.cer.

Procedure

  1. In Secure Access, navigate to Secure > Certificates > Internet destinations.

  2. Expand Umbrella root certificate, and download the Cisco Umbrella root certificate.

What to do next

See Manage Certificates and Add Custom CA Signed Root Certificate in the Secure Access User Guide.