Cisco 8600 Series Secure Routers Hardware Installation Guide

PDF

Cisco 8600 Series Secure Routers Hardware Installation Guide

Remove and replace USB 3.0 interface

Updated: October 12, 2026

Want to summarize with AI?

Log in

Describes the steps required to remove and replace the USB 3.0 interface, providing practical guidance for maintaining or upgrading device connectivity.

The Cisco 8600 Series Secure Router contain one USB 3.0 interface to store configurations or Cisco IOS XE consolidated packages.

To remove and then replace a USB flash memory stick, follow these steps:

Procedure

  1. Pull the flash memory stick from the USB port.

  2. To replace a Cisco USB Flash memory stick, insert the module into USB port 1. The Flash memory stick can be inserted or removed regardless of whether the router is powered up or not.