Outlines procedures for removing and replacing field-replaceable units, including AC and DC power supplies, USB 3.0 interfaces, fans, air filters, SFP/SFP+ modules, batteries, and repacking the router to ensure proper hardware maintenance and operational readiness.
Install and remove AC power supplies
Details the process of installing and removing AC power supplies, including step-by-step instructions for both actions to ensure safe and efficient power supply replacement.
Install and remove DC power supplies
Explains the installation and removal of DC power supplies, covering procedures for installing DC input power supplies, wiring the DC input power source, and safely removing DC power supplies.
Remove and replace USB 3.0 interface
Describes the steps required to remove and replace the USB 3.0 interface, providing practical guidance for maintaining or upgrading device connectivity.
Remove and replace the fans
Guides the removal and replacement of fans, including instructions specific to removing fans from the C8650-G2 platform to maintain proper device cooling.
Installation and removal of air filter
Explains procedures for installing and removing the air filter, outlining each task to ensure optimal airflow and device longevity.
Install and remove SFP and SFP+ modules
Outlines the steps for installing and removing SFP and SFP+ modules, including adherence to laser safety guidelines and proper removal techniques for small form pluggable modules.
Remove and replace the battery
These instructions are provided in order to comply with the EU Battery Replaceability Requirement.This section describes the procedure to remove and replace the battery from Cisco 8600 Series Secure Router.
Repack the router
Provides guidance for properly repacking the router, ensuring all components are secured for safe storage or transport.