Cisco SG250-50HP 50-Port Gigabit PoE Smart Switch
Specifications Overview
| Series | Cisco 250 Series Smart Switches |
|---|---|
| Product ID | SG250-50HP-K9UK-RF |
| Status | Orderable Buy |
| End-of-Sale Date | None Announced |
| End-of-Support Date | None Announced |
-
Document Categories-
Configuration Examples and TechNotes
- Assign an Interface VLAN as an Access or Trunk Port on a Switch
- Backup and Restore or Swap Firmware on a Switch
- Configure 802.1x Port Authentication Setting on a Switch
- Configure Bonjour Settings on a Switch
- Configure Dynamic Host Configuration Protocol (DHCP) Image Upgrade Settings on a Switch
- Configure GVRP Settings on a Switch
- Configure Global Green Ethernet Properties on a Switch
- Configure Green Ethernet Port Settings on a Switch
- Configure Idle Session Timeout Settings on a Switch
- Configure Idle Session Timeout Settings on a Switch through the CLI
- Configure Initial Settings on a Switch using the Getting Started Wizard
- Configure Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) Snooping on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Network Policy Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Port Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Port Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Properties on a Switch
- Configure Multicast Properties on a Switch
- Configure Multiple Spanning Tree Protocol (MSTP) on a Switch
- Configure Option 125 on a Server to Allow Dynamic Host Configuration Protocol (DHCP) Auto Image Updates on a Switch
- Configure Password Strength and Complexity Settings on the Switch
- Configure Port Settings to Optimize Traffic Flow on a Switch
- Configure Port Virtual Local Area Network (VLAN) Membership of an Interface on a Switch
- Configure Remote Log Server on a Switch
- Configure Remote Network Monitoring (RMON) Alarms on a Switch
- Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch
- Configure Remote Network Monitoring (RMON) History Control Settings on a Switch
- Configure SNMP Notification Recipients on a Switch through the CLI
- Configure Simple Network Management Protocol (SNMP) Communities on a Switch
- Configure Simple Network Management Protocol (SNMP) Groups on a Switch
- Configure Simple Network Management Protocol (SNMP) Groups on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) Notification Filter on a Switch
- Configure Simple Network Management Protocol (SNMP) Notification Recipients on a Switch
- Configure Simple Network Management Protocol (SNMP) Trap Settings on a Switch
- Configure Simple Network Management Protocol (SNMP) Users on a Switch
- Configure Simple Network Management Protocol (SNMP) Users on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) Views on a Switch
- Configure Simple Network Time Protocol (SNTP) Authentication Settings on a Switch
- Configure Simple Network Time Protocol (SNTP) Settings on a Switch
- Configure Simple Network Time Protocol (SNTP) Unicast Server Settings on a Switch
- Configure Spanning Tree Protocol (STP) on a Switch
- Configure System Time Settings on a Switch
- Configure Telephony Organizationally Unique Identifiers (OUI) Interface Settings on a Switch
- Configure Telephony Organizationally Unique Identifiers (OUI) Settings on a Switch
- Configure Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) Service Settings on a Switch
- Configure User Accounts to Enhance Security on a Cisco Smart or Managed Switch
- Configure Virtual Local Area Network (VLAN) Protocol-Based Groups to VLAN on a Switch
- Configure Virtual Local Area Network (VLAN) Settings on a Switch via VLAN Configuration Wizard
- Configure a VLAN Protocol-Based Group on a Switch
- Configure a VLAN on a Switch
- Configure the PNP Settings on a Switch
- Configure the UDLD Settings on a Switch
- Manage Interface Statistics on a Switch
- Manage Remote Network Monitoring (RMON) Statistics on a Switch
- Manage the Link Layer Discovery Protocol (LLDP) Neighbor Information on a Switch
- Monitor and Customize Dashboard View on a Switch
- Monitoring Dynamic MAC Addresses on Cisco Managed Switches
- Setting Static IPv4 Address on a Switch via CLI
- Setting static IPv4 address on a switch using GUI
- Switches Glossary of Terms
-
Data Sheets
- Cisco 250 Series Smart Switches Data Sheet
- Cisco 250 Series Smart Switches Data Sheet (Chinese) (PDF - 1 MB)
- Cisco 250 Series Smart Switches Data Sheet (French) (PDF - 1 MB)
- Cisco 250 Series Smart Switches Data Sheet (German) (PDF - 1 MB)
- Cisco 250 Series Smart Switches Data Sheet (Italian) (PDF - 1 MB)
- Cisco 250 Series Smart Switches Data Sheet (Spanish) (PDF - 1 MB)
-
Install and Upgrade Guides
-
Maintain and Operate Guides
-
Release Notes
- Open Source Used In 250, 350, 350X, and 550X Series Switches 2.4.5.x (PDF - 1 MB)
- Open Source Used In Cisco 250 and 350 Series Switches Firmware Version 2.1.0 (PDF - 882 KB)
- Open Source Used In Cisco 250, 350, 350X and 550X Series Switches 2.4.0.x. (PDF - 933 KB)
- Open Source Used In Cisco 250, 350, 350X and 550X Series Switches Firmware Version 2.3.0.x (PDF - 994 KB)
- Open Source Used In Cisco 250, 350, 350X and 550X Series Switches Firmware Version 2.2.5.x (PDF - 987 KB)
- Open Source Used In Cisco 250, 350, 350X and 550X Series Switches Firmware Version 2.2.0.x (PDF - 986 KB)
- Open Source Used In Cisco Sx10G Series Switches 1.4.9.x (PDF - 808 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.3.5.63 (PDF - 133 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.3.0.130 (PDF - 135 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.2.8.04 (PDF - 99 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.2.7.07 (PDF - 100 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.2.5.68 (PDF - 103 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.2.0.66 (PDF - 94 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.2.0.63 (PDF - 95 KB)
- Release Notes for 250, 350, SG350XG, and SG550XG Series Switches Software Version 2.1.0 (PDF - 93 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.4.5.71 (PDF - 149 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.4.0.94. (PDF - 141 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.4.0.91 (PDF - 145 KB)
-
Translated End-User Guides
-
Troubleshooting TechNotes
-
White Papers
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (PDF - 226 KB)
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (Chinese) (PDF - 297 KB)
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (French) (PDF - 263 KB)
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (German) (PDF - 246 KB)
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (Italian) (PDF - 256 KB)
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (Spanish) (PDF - 258 KB)
Contact Cisco
Technical Support
- Open a TAC Case Online
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
Technical Sales Questions
- Contact Us for Sales Questions
- Call 1 800 553 6387
- US/CAN | 5am - 5pm Pacific
- Other Countries
Cisco Services
-
Feedback