Virtualization for Cisco Unity Connection (CUC)

Go back to: Cisco Collaboration Virtualization
Go back to: Caveated Support for VMware CPU Reservations and Distributed Resource Scheduler


Version 12.0(1)

(top)

ALERT! This page has been updated to reflect compatibility with the latest M5 hardware. Click here to download support for M4 and older hardware.

Note: This information listed here for convenience. For latest information, when in doubt, or if conflicts, see the Supported Platform List for this version at Install and Upgrade Guides, specifically the Table for Virtual Platform Overlays.

Co-residency support= Full
Supported Versions of VMware vSphere ESXi= 5.0 U1, 5.1, 5.5, 6.0, 6.5 (For application fresh installs on ESXi 6.5 (VMFS5 only) and/or vCenter 6.5, use minimum OVA file version CUC_12.0_v1.0.ova. Does not apply to ESXi version upgrades.); HX TRC 6.0 only
Click for "IOPS"
Component &
Capacity Point

VM Configuration Requirements
click to download OVA file

Supported Hardware (Latest)
Click here to download support of older/non-orderable servers

vCPU

vRAM

vDisk

vNIC

UCS Tested Reference Configurations

UCS or 3rd-party Specs-based on Intel Xeon

200 users
See notes

1

4 GB

1 x 160 GB

1

Only available for special Cisco Unity Connection on UCS E-Series support.

1,000 users 1vCPU
See notes

1

4 GB

1 x 160 GB

1

See notes

Yes

Yes

Yes

Yes

Yes

Yes

1,000 users 2vCPU
See notes

2

4 GB

1 x 160 GB

1

See notes

Yes

Yes

Yes

Yes

Yes

Yes
1.80+ GHz

5,000 users
(larger vDisk)
See notes

2
See notes

6 GB

1 x 200 GB

1

No

No

No

Yes

Yes

Yes

No

10,000 users
See notes

4

6 GB

2x 146 GB or 2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

Yes

Yes

Yes

No

20,000 users
See notes

7

8 GB

2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

Yes

Yes

Yes

No

20,000 users with secure Jabber
See notes

7

10 GB

2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

Yes

Yes

Yes

No

 


Version 11.5(1)

(top)

ALERT! This page has been updated to reflect compatibility with the latest M5 hardware. Click here to download support for M4 and older hardware.

Note: This information listed here for convenience. For latest information, when in doubt, or if conflicts, see the Supported Platform List for this version at Install and Upgrade Guides, specifically the Table for Virtual Platform Overlays.

Co-residency support= Full
Supported Versions of VMware vSphere ESXi= 5.0 U1, 5.1, 5.5, 6.0, 6.5 (For application fresh installs on ESXi 6.5 (VMFS5 only) and/or vCenter 6.5, use minimum OVA file version CUC_11.5_v1.2.ova. Does not apply to ESXi version upgrades.); HX TRC 6.0 only
Click for "IOPS"
Component &
Capacity Point

VM Configuration Requirements
click to download OVA file

Supported Hardware (Latest)
Click here to download support of older/non-orderable servers

vCPU

vRAM

vDisk

vNIC

UCS Tested Reference Configurations

UCS or 3rd-party Specs-based on Intel Xeon

200 users
See notes

1

4 GB

1 x 160 GB

1

Only available for special Cisco Unity Connection on UCS E-Series support.

1,000 users 1vCPU
See notes

1

4 GB

1 x 160 GB

1

See notes

Yes

Yes

Yes

Yes

Yes

Yes

1,000 users 2vCPU
See notes

2

4 GB

1 x 160 GB

1

See notes

Yes

Yes

Yes

Yes

Yes

Yes
1.80+ GHz

5,000 users
(larger vDisk)
See notes

2
See notes

6 GB

1 x 200 GB

1

No

No

No

Yes

Yes

Yes

No

10,000 users
See notes

4

6 GB

2x 146 GB or 2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

Yes

Yes

Yes

No

20,000 users
See notes

7

8 GB

2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

Yes

Yes

Yes

No

 


Version 11.0(x)

(top)

ALERT! This page has been updated to reflect compatibility with the latest M5 hardware. Click here to download support for M4 and older hardware.

Note: This information listed here for convenience. For latest information, when in doubt, or if conflicts, see the Supported Platform List for this version at Install and Upgrade Guides, specifically the Table for Virtual Platform Overlays.

Co-residency support= Full
Supported Versions of VMware vSphere ESXi= 5.0 U1, 5.1, 5.5, 6.0
Click for "IOPS"
Component &
Capacity Point

VM Configuration Requirements
click to download OVA file

Supported Hardware (Latest)
Click here to download support of older/non-orderable servers

vCPU

vRAM

vDisk

vNIC

UCS Tested Reference Configurations

UCS or 3rd-party Specs-based on Intel Xeon

200 users
See notes

1

4 GB

1 x 160 GB

1

Only available for special Cisco Unity Connection on UCS E-Series support.

1,000 users 1vCPU
See notes

1

4 GB

1 x 160 GB

1

See notes

No

No

No

No

No

No

1,000 users 2vCPU
See notes

2

4 GB

1 x 160 GB

1

See notes

No

No

No

No

No

No

5,000 users
(larger vDisk)
See notes

2
See notes

6 GB

1 x 200 GB

1

No

No

No

No

No

No

No

10,000 users
See notes

4

6 GB

2x 146 GB or 2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

20,000 users
See notes

7

8 GB

2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

* See mouse-over column heading for details


Version 10.5(2)

(top)

ALERT! This page has been updated to reflect compatibility with the latest M5 hardware. Click here to download support for M4 and older hardware.

Note: This information listed here for convenience. For latest information, when in doubt, or if conflicts, see the Supported Platform List for this version at Install and Upgrade Guides, specifically the Table for Virtual Platform Overlays.

Co-residency support= Full
Supported Versions of VMware vSphere ESXi= 5.0 U1, 5.1, 5.5, 6.0, 6.5 (For application fresh installs on ESXi 6.5 (VMFS5 only) and/or vCenter 6.5, use minimum OVA file version CUC_10.5.2_vmv8_v1.7.ova. Does not apply to ESXi version upgrades.) ; HX TRC 6.0 only
Click for "IOPS"
Component &
Capacity Point

VM Configuration Requirements
click to download OVA file

Supported Hardware (Latest)
Click here to download support of older/non-orderable servers

vCPU

vRAM

vDisk

vNIC

UCS Tested Reference Configurations

UCS or 3rd-party Specs-based on Intel Xeon

100 users
See notes

1

4 GB

1 x 160 GB

1

Only available for special Cisco Unity Connection on UCS E-Series support.

1,000 users 1vCPU
See notes

1

4 GB

1 x 160 GB

1

See notes

No

No

No

No

No

No

1,000 users 2vCPU
See notes

2

4 GB

1 x 160 GB

1

See notes

No

No

No

No

No

No

5,000 users
(larger vDisk)
See notes

2
See notes

6 GB

1 x 200 GB

1

No

No

No

No

No

No

No

10,000 users
See notes

4

6 GB

2x 146 GB or 2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

20,000 users
See notes

7

8 GB

2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

* See mouse-over column heading for details


Version 9.1(x) and 10.0(1)

(top)

ALERT! This page has been updated to reflect compatibility with the latest M5 hardware. Click here to download support for M4 and older hardware.

Note: This information listed here for convenience. For latest information, when in doubt, or if conflicts, see the Supported Platform List for this version at Install and Upgrade Guides, specifically the Table for Virtual Platform Overlays.

Co-residency support= Full
Supported Versions of VMware vSphere ESXi= 4.0, 4.1, 5.0 U1, 5.1, 5.5, 6.0
Click for "IOPS"
Component &
Capacity Point

VM Configuration Requirements
click to download OVA file

Supported Hardware (Latest)
Click here to download support of older/non-orderable servers

vCPU

vRAM

vDisk

vNIC

UCS Tested Reference Configurations

UCS or 3rd-party Specs-based on Intel Xeon

100 users
See notes

1

4 GB

1 x 160 GB

1

Only available for special Cisco Unity Connection on UCS E-Series support.

1,000 users
See notes

1

4 GB

1 x 160 GB

1

No

No

No

No

No

No

No

5,000 users
(larger vDisk)
See notes

2
See notes

6 GB

1 x 200 GB

1

No

No

No

No

No

No

No

10,000 users
See notes

4

6 GB

2x 146 GB or 2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

20,000 users
See notes

7

8 GB

2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

* See mouse-over column heading for details


Version 8.6(2) and 9.0(x)

(top)

ALERT! This page has been updated to reflect compatibility with the latest M5 hardware. Click here to download support for M4 and older hardware.

Note: This information listed here for convenience. For latest information, when in doubt, or if conflicts, see the Supported Platform List for this version at Install and Upgrade Guides, specifically the Table for Virtual Platform Overlays.

Co-residency support= Full

Supported Versions of VMware vSphere ESXi=

Click for "IOPS"

9.0(1): 4.0, 4.1, 5.0, 5.1, 5.5, 6.0
8.6(2): 4.0, 4.1, 5.0, 5.1
Component &
Capacity Point

VM Configuration Requirements
click to download OVA file

Supported Hardware (Latest)
Click here to download support of older/non-orderable servers

vCPU

vRAM

vDisk

vNIC

UCS Tested Reference Configurations

UCS or 3rd-party Specs-based on Intel Xeon

100 users
See notes

1

4 GB

1 x 160 GB

1

Only available for special Cisco Unity Connection on UCS E-Series support.

1,000 users
See notes

1

4 GB

1 x 160 GB

1

No

No

No

No

No

No

No

5,000 users
(larger vDisk)
See notes

2

6 GB

1 x 200 GB

1

No

No

No

No

No

No

No

10,000 users
See notes

4

6 GB

2x 146 GB or 2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

20,000 users
See notes

7

8 GB

2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

* See mouse-over column heading for details


Version 8.6(1)

(top)

ALERT! This page has been updated to reflect compatibility with the latest M5 hardware. Click here to download support for M4 and older hardware.

Note: This information listed here for convenience. For latest information, when in doubt, or if conflicts, see the Supported Platform List for this version at Install and Upgrade Guides, specifically the Table for Virtual Platform Overlays.

Co-residency support= Full
Supported Versions of VMware vSphere ESXi= 4.0, 4.1, 5.0, 5.1
Click for "IOPS"
Component &
Capacity Point

VM Configuration Requirements
click to download OVA file

Supported Hardware (Latest)
Click here to download support of older/non-orderable servers

vCPU

vRAM

vDisk

vNIC

UCS Tested Reference Configurations

UCS or 3rd-party Specs-based on Intel Xeon

500 users
See notes

1

4 GB

1 x 160 GB

1

No

No

No

No

No

No

No

1,000 users
See notes

1

4 GB

1 x 160 GB

1

No

No

No

No

No

No

No

5,000 users
(larger vDisk)
See notes

2

6 GB

1 x 200 GB

1

No

No

No

No

No

No

No

10,000 users
See notes

4

6 GB

2x 146 GB or 2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

20,000 users
See notes

7

8 GB

2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

* See mouse-over column heading for details


Version 8.0(2+) and 8.5(x)

(top)

ALERT! This page has been updated to reflect compatibility with the latest M5 hardware. Click here to download support for M4 and older hardware.

Note: This information listed here for convenience. For latest information, when in doubt, or if conflicts, see the Supported Platform List for this version at Install and Upgrade Guides, specifically the Table for Virtual Platform Overlays.

Co-residency support= Full
Supported Versions of VMware vSphere ESXi= 4.0, 4.1, 5.0, 5.1
Click for "IOPS"
Component &
Capacity Point

VM Configuration Requirements
click to download OVA file

Supported Hardware (Latest)
Click here to download support of older/non-orderable servers

vCPU

vRAM

vDisk

vNIC

UCS Tested Reference Configurations

UCS or 3rd-party Specs-based on Intel Xeon

500 users
See notes

1

2 GB

1 x 160 GB

1

No

No

No

No

No

No

No

1,000 users
See notes

1

4 GB

1 x 160 GB

1

No

No

No

No

No

No

No

5,000 users
(larger vDisk)
See notes

2

4 GB

1 x 200 GB

1

No

No

No

No

No

No

No

10,000 users
See notes

4

4 GB

2x 146 GB or 2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

20,000 users
See notes

7

8 GB

2x 300 GB or 2x 500 GB disks with pre-aligned disk partitions. If using UCS C210M2 TRC#1, requires at least one additional physical disk for the 500GB overlay.

1

No

No

No

No

No

No

No

* See mouse-over column heading for details


Notes on 100 and 200 user VM configurations

(top)

When deployed on a BE6000S server and version is 11.0, capacity is limited to 150 users/ 300 devices and design must follow BE6000S requirements in www.cisco.com/go/ucsrnd.

For use only on UCS E series blades see Cisco Unity Connection on UCSE.

For more information on VMware vSphere ESXi datastore requirements for this VM configuration, refer to System Requirements document.

VMWare release 5.1 and older, requires reserving one physical core per physical server - see co-residency policy. With VMWare release 5.5 and later and Unity Connection release 10.5.2 and later while utilizing the latency sensitivity feature, you may remove the requirement of dedicated one physical core per physical server. This requires the Unity Connection VM Latency Sensitivity to be set to 'High' while at least one other VMs is set to 'Normal'. Recommend every VM to be set to 'Normal' except for Unity Connection VMs.

Limits for Standalone Configuration:

  • 8 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 2 ports iLBC or G.722
  • Voice mail only (No Integrated or Unified Messaging)
Limits for Active/Active Cluster Configuration:
  • 16 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 4 ports iLBC or G.722
  • Voice mail only (No Integrated or Unified Messaging)
Additional Features:

Feature Descriptions Minimum Software Version
Total number of Tenants supported on Unity Connection 0 N/A
Total number of concurrent video calls 0 N/A
Total number of Connection SRSV branches supported 0 N/A


Notes on 500 user VM configurations

(top)

For more information on VMware vSphere ESXi datastore requirements for this VM configuration, refer to System Requirements document.

VMWare release 5.1 and older, requires reserving one physical core per physical server - see co-residency policy. With VMWare release 5.5 and later and Unity Connection release 10.5.2 and later while utilizing the latency sensitivity feature, you may remove the requirement of dedicated one physical core per physical server. This requires the Unity Connection VM Latency Sensitivity to be set to 'High' while at least one other VMs is set to 'Normal'. Recommend every VM to be set to 'Normal' except for Unity Connection VMs.

Limits for Standalone Configuration:

  • 16 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 4 ports iLBC or G.722
Limits for Active/Active Cluster Configuration:
  • 32 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 8 ports iLBC or G.722
Deprecated in the 8.6(2) release.


Notes on 1,000 user 1vcpu VM configuration

(top)

When deployed on a BE6000S server:

  • minimum supported version is 10.5(2)
  • capacity is limited to 150 users / 300 devices and design must follow BE6000S requirements in www.cisco.com/go/ucsrnd.
  • Not supported: Single InBox / Unified Messaging, IMAP / integrated messaging. Supported: SMTP Relay. See Unity Connection Supported Platforms List for more information (e.g. 11.0 SPL here).
For more information on VMware vSphere ESXi datastore requirements for this VM configuration, refer to System Requirements document.

VMWare release 5.1 and older, requires reserving one physical core per physical server - see co-residency policy. With VMWare release 5.5 and later and Unity Connection release 10.5.2 and later while utilizing the latency sensitivity feature, you may remove the requirement of dedicated one physical core per physical server. This requires the Unity Connection VM Latency Sensitivity to be set to 'High' while at least one other VMs is set to 'Normal'. Recommend every VM to be set to 'Normal' except for Unity Connection VMs.

Limits for Standalone Configuration:

  • 24 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 6 ports iLBC or G.722
Limits for Active/Active Cluster Configuration:
  • 48 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 12 ports iLBC or G.722
For use on BE6000 as well as other TRC and non-TRC configurations.

Additional Features:

Feature Descriptions Minimum Software Version
Total number of Tenants supported on Unity Connection 5 10.x
Total number of concurrent video calls 0 N/A
Total number of Connection SRSV branches supported 5 9.1(2)
Total number of Unified Messaging (Single Inbox) users 1,000 10.5(1)


Notes on 1,000 user 2vcpu VM configuration

(top)

When deployed on a BE6000S server:

  • minimum supported version is 10.5(2)
  • capacity is limited to 150 users / 300 devices and design must follow BE6000S requirements in www.cisco.com/go/ucsrnd.
  • Due to the larger footprint of this VM, the max application / VM count per BE6000S server is reduced. See Sizing Guidelines or www.cisco.com/go/vmpt for more details.
  • Supported:
    • EITHER Single InBox / Unified Messaging OR IMAP / integrated messaging
    • SMTP Relay
    • See Unity Connection Supported Platforms List for more information (e.g. 11.0 SPL here).
For more information on VMware vSphere ESXi datastore requirements for this VM configuration, refer to System Requirements document.

VMWare release 5.1 and older, requires reserving one physical core per physical server - see co-residency policy. With VMWare release 5.5 and later and Unity Connection release 10.5.2 and later while utilizing the latency sensitivity feature, you may remove the requirement of dedicated one physical core per physical server. This requires the Unity Connection VM Latency Sensitivity to be set to 'High' while at least one other VMs is set to 'Normal'. Recommend every VM to be set to 'Normal' except for Unity Connection VMs.

Limits for Standalone Configuration:

  • 24 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 6 ports iLBC or G.722
Limits for Active/Active Cluster Configuration:
  • 48 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 12 ports iLBC or G.722
For use on BE6000 as well as other TRC and non-TRC configurations.

Additional Features:

Feature Descriptions Minimum Software Version
Total number of Tenants supported on Unity Connection 5 10.x
Total number of concurrent video calls 0 N/A
Total number of Connection SRSV branches supported 5 9.1(2)
Total number of Unified Messaging (Single Inbox) users 1,000 10.5(1)


Notes on 5,000 user VM configurations

(top)

If Unity Connection 8.x or 9.x and installing on UCS C240 M3S TRC#2 (including Cisco Business Edition 7000 server SKUs BE7K-K9 and BE7K-K9-XU), OVA modification is required as described in the Unity Connection Installation Guide.

For more information on VMware vSphere ESXi datastore requirements for this VM configuration, refer to System Requirements document.

VMWare release 5.1 and older, requires reserving one physical core per physical server - see co-residency policy. With VMWare release 5.5 and later and Unity Connection release 10.5.2 and later while utilizing the latency sensitivity feature, you may remove the requirement of dedicated one physical core per physical server. This requires the Unity Connection VM Latency Sensitivity to be set to 'High' while at least one other VMs is set to 'Normal'. Recommend every VM to be set to 'Normal' except for Unity Connection VMs.

Limits for Standalone Configuration:

  • 100 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 25 ports iLBC or G.722
Limits for Active/Active Cluster Configuration:
  • 200 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 50 ports iLBC or G.722
Additional Features:

Feature Descriptions Minimum Software Version
Total number of Tenants supported on Unity Connection 20 10.x
Total number of concurrent video calls 0 N/A
Total number of Connection SRSV branches supported 35 10.5(1)


Notes on 10,000 user VM configurations

(top)

If Unity Connection 8.x or 9.x and installing on UCS C240 M3S TRC#2 (including Cisco Business Edition 7000 server SKUs BE7K-K9 and BE7K-K9-XU), OVA modification is required as described in the Unity Connection Installation Guide.

For more information on VMware vSphere ESXi datastore requirements for this VM configuration, refer to System Requirements document.

The 500 GB disks will require at least one additional disk if using the C210 TRC.

VMWare release 5.1 and older, requires reserving one physical core per physical server - see co-residency policy. With VMWare release 5.5 and later and Unity Connection release 10.5.2 and later while utilizing the latency sensitivity feature, you may remove the requirement of dedicated one physical core per physical server. This requires the Unity Connection VM Latency Sensitivity to be set to 'High' while at least one other VMs is set to 'Normal'. Recommend every VM to be set to 'Normal' except for Unity Connection VMs.

Limits for Standalone Configuration:

  • 150 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 35 ports iLBC or G.722
Limits for Active/Active Cluster Configuration:
  • 300 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 70 ports iLBC or G.722
Additional Features:

Feature Descriptions Minimum Software Version
Total number of Tenants supported on Unity Connection 30 10.x
Total number of concurrent video calls 0 N/A
Total number of Connection SRSV branches supported 35 10.5(1)


Notes on 20,000 user VM configurations

(top)

This OVA serves: For more information on VMware vSphere ESXi datastore requirements for this VM configuration, refer to System Requirements document.

The 500 GB disks will require at least one additional disk if using the C210 TRC.

VMWare release 5.1 and older, requires reserving one physical core per physical server - see co-residency policy. With VMWare release 5.5 and later and Unity Connection release 10.5.2 and later while utilizing the latency sensitivity feature, you may remove the requirement of dedicated one physical core per physical server. This requires the Unity Connection VM Latency Sensitivity to be set to 'High' while at least one other VMs is set to 'Normal'. Recommend every VM to be set to 'Normal' except for Unity Connection VMs.

Limits for Standalone Configuration:

  • 250 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 60 ports iLBC or G.722
Limits for Active/Active Cluster Configuration:
  • 500 ports G.711 or G.729a (combined TUI, VUI, or TTS)
  • 120 ports iLBC or G.722
Additional Features:

Feature Descriptions Minimum Software Version
Total number of Tenants supported on Unity Connection 60 10.x
Total number of concurrent video calls 35 N/A
Total number of Connection SRSV branches supported 35 10.5(1)
Total number of SUpported Secure Jabber Endpoint in HA pair 20,000 12.0


IOPS and Storage System Performance Requirements

(top)

 IOPS Type   1vCPU   2vCPU   4vCPU   7vCPU 
Avg Total 78.66 129.01 217.89 201.73
Peak Total 760.99 714.06 867.88 773.70
Avg Total 5.90 19.60 45.67 9.53
Peak Total 601.84 469.46 693.21 526.22
Avg Total 72.77 109.40 172.22 192.20
Peak Total 247.14 293.51 371.97 413.50