Physical Storage Best Practices for Cisco Unity 4.0 (With Microsoft Exchange)

Available Languages

Download Options

PDF (167.8 KB)
View with Adobe Reader on a variety of devices

Updated:March 23, 2006

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

White Paper: Physical Storage Best Practices for Cisco Unity 4.0 (With Microsoft Exchange)

Table Of Contents

White Paper: Physical Storage Best Practices for Cisco Unity 4.0 (With Microsoft Exchange)

This White Paper Is Obsolete

White Paper: Physical Storage Best Practices for Cisco Unity 4.0 (With Microsoft Exchange)

Revised April 10, 2006

This White Paper Is Obsolete

This document was originally written for servers that are no longer available, and the information it contained on configuring physical storage is now available in other documents:

•For information on the recommended RAID configuration for your server, refer to the Cisco Unity Supported Platforms List at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_data_sheets_list.html.

•For information on the optimum drive locations for application, log, and database files on the Cisco Unity server, refer to the "Determining the Drive Locations for Files on the Cisco Unity Server" section in the "Preparing for the Installation" chapter of the applicable Cisco Unity installation guide (with Microsoft Exchange) at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html.

•For information on circular logging in Exchange, refer to the "Circular Logging in Exchange" section in the "Configuring Exchange for Maintenance Tasks" chapter of the applicable Cisco Unity Maintenance Guide (With Microsoft Exchange) at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_maintenance_guides_list.html.

© 2006 Cisco Systems, Inc. All rights reserved.