- Cisco Unified SRST Manager Roadmap
- Cisco Unified SRST Manager Workflow
-
- Cisco Unified SRST Manager Overview
- Cisco Unified SRST Manager Administration Interfaces
- About the Cisco Unified SRST Manager GUI
- Overview of Initial Configuration Tasks
- Logging In to the Cisco Unified SRST Manager Graphical User Interface
- Configuring E-SRST Site Provisioning
- Using the Setup Wizard
- Configuring Users for Cisco Unified SRST Manager
- Using the Central Call Agent Wizard to Add Cisco Unified Communications Manager Information
- Viewing and Updating the Central Call Agent
- Viewing the Cisco Unified SRST References
- Viewing, Adding, and Removing the Central Call Agent
- Viewing the Cluster Nodes Associated With a Central Call Agent
- Viewing and Provisioning Sites
- Changing the Information for a Single Cisco Unified SRST Site
- Changing the Information for Multiple Cisco Unified SRST Sites at Once
- Using Site Templates
- Creating, Changing, and Viewing a Site Template
-
- Monitoring the Provisioning Status of a Branch Device
- Monitoring the Learned Cisco Unified Communications Manager Express Routers
- Viewing Configuration Changes
- Maintaining the Cisco Unified SRST Manager System
- Viewing Reports
- Backing Up and Restoring Data
- Configuring Backup and Restore
- Backing Up and Restoring Data Using the CLI
- Saving and Reloading the Cisco Unified SRST Manager Configuration
- Glossary
Using Site Templates
Because many sites have common sets of information, Cisco Unified SRST Manager provides site templates. Use these templates to apply configuration settings to new sites.
By default, Cisco Unified SRST Manager includes the following site templates:
You cannot change the name of this site template or delete it, but you can edit its values.
You can also create custom site templates. Table 9 describes the features configured for the default set of site templates. For details about each feature, see Table 10 .
Step 1
Select Configure > Site Templates.
The system displays the Site Templates page, containing a list of the site templates configured in Cisco Unified SRST Manager.
Step 2 To create a new site template, update an existing site template, or view the details of an existing site template, see Creating, Changing, and Viewing a Site Template.
Step 3 To remove a site template, do the following:
a. Select the site template to delete.
c. Click OK at the warning message.
Feedback