- Cisco Unified SRST Manager Roadmap
- Cisco Unified SRST Manager Workflow
-
- Cisco Unified SRST Manager Overview
- Cisco Unified SRST Manager Administration Interfaces
- About the Cisco Unified SRST Manager GUI
- Overview of Initial Configuration Tasks
- Logging In to the Cisco Unified SRST Manager Graphical User Interface
- Configuring E-SRST Site Provisioning
- Using the Setup Wizard
- Configuring Users for Cisco Unified SRST Manager
- Using the Central Call Agent Wizard to Add Cisco Unified Communications Manager Information
- Viewing and Updating the Central Call Agent
- Viewing the Cisco Unified SRST References
- Viewing, Adding, and Removing the Central Call Agent
- Viewing the Cluster Nodes Associated With a Central Call Agent
- Viewing and Provisioning Sites
- Changing the Information for a Single Cisco Unified SRST Site
- Changing the Information for Multiple Cisco Unified SRST Sites at Once
- Using Site Templates
- Creating, Changing, and Viewing a Site Template
-
- Monitoring the Provisioning Status of a Branch Device
- Monitoring the Learned Cisco Unified Communications Manager Express Routers
- Viewing Configuration Changes
- Maintaining the Cisco Unified SRST Manager System
- Viewing Reports
- Backing Up and Restoring Data
- Configuring Backup and Restore
- Backing Up and Restoring Data Using the CLI
- Saving and Reloading the Cisco Unified SRST Manager Configuration
- Glossary
Using the Setup Wizard
Use the Setup Wizard to set initial values for the Cisco Unified SRST Manager system.
Gather the following information before you run the Setup Wizard:
|
|
---|---|
|
|
Determines whether the system should auto-learn the call forwarding settings. |
|
The voicemail pilot number for the branch office call agent. The system saves this number to the default site template. If the “Autolearn call forward settings” option is set to “Yes,” the voicemail pilot number is automatically retrieved from the central call agent during the provisioning process. Enter the voicemail pilot number if you want to override the retrieved pilot number. |
|
|
|
Enables security between Cisco Unified SRST Manager and devices at the branch. |
Step 1 Select Setup Wizards > Setup.
The system displays the Introduction page of the setup wizard.
Step 2 Click Next to begin the wizard. See Table 5 for descriptions of the parameters configured in the wizard.