- Cisco Unified SRST Manager Roadmap
- Cisco Unified SRST Manager Workflow
-
- Cisco Unified SRST Manager Overview
- Cisco Unified SRST Manager Administration Interfaces
- About the Cisco Unified SRST Manager GUI
- Overview of Initial Configuration Tasks
- Logging In to the Cisco Unified SRST Manager Graphical User Interface
- Configuring E-SRST Site Provisioning
- Using the Setup Wizard
- Configuring Users for Cisco Unified SRST Manager
- Using the Central Call Agent Wizard to Add Cisco Unified Communications Manager Information
- Viewing and Updating the Central Call Agent
- Viewing the Cisco Unified SRST References
- Viewing, Adding, and Removing the Central Call Agent
- Viewing the Cluster Nodes Associated With a Central Call Agent
- Viewing and Provisioning Sites
- Changing the Information for a Single Cisco Unified SRST Site
- Changing the Information for Multiple Cisco Unified SRST Sites at Once
- Using Site Templates
- Creating, Changing, and Viewing a Site Template
-
- Monitoring the Provisioning Status of a Branch Device
- Monitoring the Learned Cisco Unified Communications Manager Express Routers
- Viewing Configuration Changes
- Maintaining the Cisco Unified SRST Manager System
- Viewing Reports
- Backing Up and Restoring Data
- Configuring Backup and Restore
- Backing Up and Restoring Data Using the CLI
- Saving and Reloading the Cisco Unified SRST Manager Configuration
- Glossary
Logging In to the Cisco Unified SRST Manager Graphical User Interface
The Cisco Unified SRST Manager graphical user interface (GUI) supports the following web browsers:
- Install Cisco Unified SRST Manager software. See Installation and Upgrade Guide for Cisco Unified SRST Manager Release 11.0 for information.
- Gather the administrator username and password that you entered during the installation.
Step 2
Enter the IP address of the Cisco Unified SRST Manager system.
Step 3 Enter the administrator user name and password.
The Cisco Unified SRST Manager dashboard appears.
About the Cisco Unified SRST Manager Dashboard
Monitor the status of the system periodically to ensure that the deployment remains ready for failover events. You can monitor the system from the Cisco Unified SRST Manager dashboard.
The dashboard provides an at-a-glance view of the state of the system. The dashboard contains a summary of items that would typically require the attention of the administrator, such as error and warning messages. When the system is functioning normally, with no alerts or activity, the dashboard shows minimal information.
You can return to the dashboard from anywhere in the system by clicking Dashboard on the top right.
The dashboard is comprised of the following areas:
- Provisioning Status: Displays a summary of the results of the most recent provisioning cycle. If all sites have been successfully provisioned, a single success message is displayed. If any sites are disabled, have failed provisioning, or have never been provisioned, the provisioning status panes displays a site count for each provisioning outcome respectively. For provisioning failures, the system generates a system alert message for each site that indicates the reason for the failure. To review site specific results by status, click the corresponding report link.
- System Alerts: Displays the number of critical, warning, error, and informational alert messages that require attention. To review system alert details by level, click the corresponding link. See System Alerts for more description of the alerts.
Feedback