- Cisco Unified SRST Manager Roadmap
- Cisco Unified SRST Manager Workflow
-
- Cisco Unified SRST Manager Overview
- Cisco Unified SRST Manager Administration Interfaces
- About the Cisco Unified SRST Manager GUI
- Overview of Initial Configuration Tasks
- Logging In to the Cisco Unified SRST Manager Graphical User Interface
- Configuring E-SRST Site Provisioning
- Using the Setup Wizard
- Configuring Users for Cisco Unified SRST Manager
- Using the Central Call Agent Wizard to Add Cisco Unified Communications Manager Information
- Viewing and Updating the Central Call Agent
- Viewing the Cisco Unified SRST References
- Viewing, Adding, and Removing the Central Call Agent
- Viewing the Cluster Nodes Associated With a Central Call Agent
- Viewing and Provisioning Sites
- Changing the Information for a Single Cisco Unified SRST Site
- Changing the Information for Multiple Cisco Unified SRST Sites at Once
- Using Site Templates
- Creating, Changing, and Viewing a Site Template
-
- Monitoring the Provisioning Status of a Branch Device
- Monitoring the Learned Cisco Unified Communications Manager Express Routers
- Viewing Configuration Changes
- Maintaining the Cisco Unified SRST Manager System
- Viewing Reports
- Backing Up and Restoring Data
- Configuring Backup and Restore
- Backing Up and Restoring Data Using the CLI
- Saving and Reloading the Cisco Unified SRST Manager Configuration
- Glossary
Feature History
This section lists the features documented in the Cisco Unified SRST Manager Administration Guide and maps them to the modules in which they appear.
Note
Cisco Unified Survivable Remote Site Telephony (SRST) Manager is End-of-Life (EOL). Hence, provisioning for Unified E-SRST through Unified SRST Manager is not supported for Unified E-SRST Release 12.2 and later releases. For more information, see Migration from Unified SRST Manager to Unified E-SRST.
Table -1 lists the Cisco Unified Survivable Remote Site Telephony (SRST) Manager version that introduced support for a given feature. Unless noted otherwise, subsequent versions of Cisco Unified SRST Manager supports that feature. The features that were introduced or modified in Cisco Unified SRST Manager 9.0.6 and later appear in the table.
Note
Not all features may be supported in your Cisco Unified SRST Manager version.
To determine the correct Cisco Unified Communications Manager version and Cisco Unified Survivable Remote Site Telephony (SRST/ESRST) release that supports a specific Cisco Unified SRST Manager version, see the Cisco Unified SRST Manager Compatibility Matrix at: http://docwiki.cisco.com/wiki/Cisco_Unified_SRST_Manager_Compatibility_Matrix
|
|
|
|
|
|---|---|---|---|
Users can view the list of CLIs that are pushed to router by Cisco Unified SRST Manager. |
|||
Administrative XML (AXL) support is upgraded to 9.0 from Cisco Unified SRST Manager 11.0 onwards. |
|||
In case of a provisioning failure, the Cisco Unified SRST Manager restores the router back to the original configuration state by removing all the new CLIs that were added before the failure. |
Changing the Information for a Single Cisco Unified SRST Site |
||
The Cisco Unified SRST Manager triggers provisioning if there are configuration changes from the last successful provisioning. |
|||
From Cisco Unified SRST Manager Release 11.0 onwards, the scale of Enhanced SRST (ESRST) mode is increased to match the scale of classic SRST for both Session Initiation Protocol (SIP) and Signaling Connection Control Protocol (SCCP) phones. |
Cisco Unified Survivable Remote Site Telephony and Cisco Unified Enhanced Survivable Remote Site Telephony Version 11.0 Data Sheet |
||
Cisco Unified SRST Manager Release 11.0 supports new phone models. |
|||
Error messages are made more meaningful to enhance the debug ability. |
|||
Entering the DNS server details is optional while configuring Cisco Unified Communications Manager from Cisco Unified SRST Manager. |
Using the Central Call Agent Wizard to Add Cisco Unified Communications Manager Information |
||
Enables Cisco Unified SRST Manager with multiple user support. |
|||
Fast track is supported from Cisco Unified SRST Manager 11.0 onwards for SIP phones in ESRST mode. |
|||
Support is provided for Cisco Jabber - Client Services Framework (CSF) Client. |
|||
From Cisco Unified SRST Manager 11.0 onwards, scheduled provisioning is optional. |
Using the Central Call Agent Wizard to Add Cisco Unified Communications Manager Information |
||
Cisco Unified SRST Manager 11.0 supports five new platforms. |
|||
Cisco Unified SRST Manager 11.0 supports ESXi 5.1 and ESXi 5.5. |
|||
Dial Plan is not supported from Cisco Unified SRST Manager 9.0.6. A note has been added in the applicable sections. |
|||
Administrative XML (AXL) support is upgraded to 8.5 from Cisco Unified SRST Manager 9.0.6 onwards. |
Feedback