- Cisco Unified SRST Manager Roadmap
- Cisco Unified SRST Manager Workflow
-
- Cisco Unified SRST Manager Overview
- Cisco Unified SRST Manager Administration Interfaces
- About the Cisco Unified SRST Manager GUI
- Overview of Initial Configuration Tasks
- Logging In to the Cisco Unified SRST Manager Graphical User Interface
- Configuring E-SRST Site Provisioning
- Using the Setup Wizard
- Configuring Users for Cisco Unified SRST Manager
- Using the Central Call Agent Wizard to Add Cisco Unified Communications Manager Information
- Viewing and Updating the Central Call Agent
- Viewing the Cisco Unified SRST References
- Viewing, Adding, and Removing the Central Call Agent
- Viewing the Cluster Nodes Associated With a Central Call Agent
- Viewing and Provisioning Sites
- Changing the Information for a Single Cisco Unified SRST Site
- Changing the Information for Multiple Cisco Unified SRST Sites at Once
- Using Site Templates
- Creating, Changing, and Viewing a Site Template
-
- Monitoring the Provisioning Status of a Branch Device
- Monitoring the Learned Cisco Unified Communications Manager Express Routers
- Viewing Configuration Changes
- Maintaining the Cisco Unified SRST Manager System
- Viewing Reports
- Backing Up and Restoring Data
- Configuring Backup and Restore
- Backing Up and Restoring Data Using the CLI
- Saving and Reloading the Cisco Unified SRST Manager Configuration
- Glossary
Monitoring the Learned Cisco Unified Communications Manager Express Routers
Step 1
Select Monitor > Learned CUCME Routers.
The system displays the Learned CUCME Routers page listing all the Cisco Unified Communications Manager Express routers that have been added to Cisco Unified SRST Manager. For each router, the system lists the following information:
Step 2 To filter the list of routers, do the following:
a. Select a filter from the Filter drop-down list.
b. Select a condition from the Match if drop-down list.
e. To clear the values, click Clear Filter and click Go.
Feedback