- Cisco Unified SRST Manager Roadmap
- Cisco Unified SRST Manager Workflow
-
- Cisco Unified SRST Manager Overview
- Cisco Unified SRST Manager Administration Interfaces
- About the Cisco Unified SRST Manager GUI
- Overview of Initial Configuration Tasks
- Logging In to the Cisco Unified SRST Manager Graphical User Interface
- Configuring E-SRST Site Provisioning
- Using the Setup Wizard
- Configuring Users for Cisco Unified SRST Manager
- Using the Central Call Agent Wizard to Add Cisco Unified Communications Manager Information
- Viewing and Updating the Central Call Agent
- Viewing the Cisco Unified SRST References
- Viewing, Adding, and Removing the Central Call Agent
- Viewing the Cluster Nodes Associated With a Central Call Agent
- Viewing and Provisioning Sites
- Changing the Information for a Single Cisco Unified SRST Site
- Changing the Information for Multiple Cisco Unified SRST Sites at Once
- Using Site Templates
- Creating, Changing, and Viewing a Site Template
-
- Monitoring the Provisioning Status of a Branch Device
- Monitoring the Learned Cisco Unified Communications Manager Express Routers
- Viewing Configuration Changes
- Maintaining the Cisco Unified SRST Manager System
- Viewing Reports
- Backing Up and Restoring Data
- Configuring Backup and Restore
- Backing Up and Restoring Data Using the CLI
- Saving and Reloading the Cisco Unified SRST Manager Configuration
- Glossary
About the Cisco Unified SRST Manager GUI
Tip
When you use the Cisco Unified SRST Manager GUI, you can use the Back and Forward buttons on your browser to view information in another window, but if you make changes in that window and submit your changes, you will receive an error and your changes will not be saved. Do not submit information after using your browser's navigation tools to move to another window. Click the appropriate button or menu to reach the window in which you want to enter information.
About the Cisco Unified SRST Manager Dashboard
You should periodically monitor the status of the system to ensure that the deployment remains ready for failover events. You can monitor the system from the Cisco Unified SRST Manager dashboard.
The Cisco Unified SRST Manager dashboard provides an at-a-glance view of the state of the system. The dashboard contains a summary of items that would typically require the attention of the administrator, such as error and warning messages. When the system is functioning normally, with no alerts or activity, the dashboard shows minimal information.
You can return to the dashboard from anywhere in the system by clicking Dashboard on the top right.
The dashboard includes two areas:
- Provisioning Status: Displays a summary of the results of the most recent provisioning cycle. If all sites have been successfully provisioned, a single success message is displayed. If any sites are disabled, have failed provisioning, or have never been provisioned, the provisioning status panes displays a site count for each provisioning outcome respectively. For provisioning failures, the system generates a system alert message for each site that indicates the reason for the failure. To review site specific results by status, click the corresponding report link.
- System Alerts: Displays the number of critical, warning, error, and informational alert messages that require attention. To review system alert details by level, click the corresponding link. See System Alerts for more information about alerts.
Feedback