- Cisco Unified SRST Manager Roadmap
- Cisco Unified SRST Manager Workflow
-
- Cisco Unified SRST Manager Overview
- Cisco Unified SRST Manager Administration Interfaces
- About the Cisco Unified SRST Manager GUI
- Overview of Initial Configuration Tasks
- Logging In to the Cisco Unified SRST Manager Graphical User Interface
- Configuring E-SRST Site Provisioning
- Using the Setup Wizard
- Configuring Users for Cisco Unified SRST Manager
- Using the Central Call Agent Wizard to Add Cisco Unified Communications Manager Information
- Viewing and Updating the Central Call Agent
- Viewing the Cisco Unified SRST References
- Viewing, Adding, and Removing the Central Call Agent
- Viewing the Cluster Nodes Associated With a Central Call Agent
- Viewing and Provisioning Sites
- Changing the Information for a Single Cisco Unified SRST Site
- Changing the Information for Multiple Cisco Unified SRST Sites at Once
- Using Site Templates
- Creating, Changing, and Viewing a Site Template
-
- Monitoring the Provisioning Status of a Branch Device
- Monitoring the Learned Cisco Unified Communications Manager Express Routers
- Viewing Configuration Changes
- Maintaining the Cisco Unified SRST Manager System
- Viewing Reports
- Backing Up and Restoring Data
- Configuring Backup and Restore
- Backing Up and Restoring Data Using the CLI
- Saving and Reloading the Cisco Unified SRST Manager Configuration
- Glossary
Cisco Unified SRST Manager Administration Interfaces
Cisco Unified SRST Manager Release utilizes CLI, GUI and REST interface. This chapter describes these interfaces, contains the following sections.
CLI
The CLI is a text-based interface accessed through a secure session (ssh) session to the server hosting the Cisco Unified SRST Manager VM. Those familiar with Cisco IOS command structure and routers will see similarities.
The Cisco Unified SRST Manager commands are structured much like the Cisco IOS CLI commands. However, the Cisco Unified SRST Manager CLI commands do not affect Cisco IOS configurations.
See How to Use the Cisco Unified SRST Manager CLI for the instructions to enter the Cisco Unified SRST Manager CLI environment.
The CLI is accessible from a PC or server anywhere in the IP network.
CLI commands can also be used for routine monitoring and maintenance of the Cisco Unified SRST Manager system.
GUI
Cisco Unified SRST Manager provides a GUI. For information on using the GUI, see the online help in the application or the relevant sections in this guide.
Feedback