Call Commands

Available Languages

Download Options

  • PDF     (345.5 KB)
    View with Adobe Reader on a variety of devices
Updated:November 12, 2009

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Call Commands

Table Of Contents

Call Commands

call answer

call end

call start


Call Commands

Revised: Nov 13, 2009, OL-19335-02

This chapter contains the following call commands:

•call answer

•call end

•call start

call answer

call answer

Syntax Description

None

Command Modes

Admin

Command privilege level: 4

Command History

Release
Modifications

1.2

This command was first documented.


Usage Guidelines

Use this command to answer an incoming call.

Examples 

admin:call answer

Related Commands

Command
Description

call end

Terminates the current call or calls.

call start

Initiates a call to the specified address.


call end

call end{address}

Syntax Description

address

Telephone number or IP address.


Command Modes

Admin

Command privilege level: 4

Command History

Release
Modifications

1.2

This command was first documented.


Usage Guidelines

Use this command to terminate the current call or calls.

Examples 

admin:call end 12345

Related Commands

Command
Description

call answer

Answers s an incoming call.

call start

Initiates a call to the specified address.


call start

call start {address}

Syntax Description

address

Telephone number or IP address.


Command Modes

Admin

Command privilege level: 4

Command History

Release
Modifications

1.2

This command was first documented.


Usage Guidelines

Use this command to initiate a call to the specified address.

Note You may only make one call at a time, and cannot hold/resume a call.

Examples 

admin:call start 192.0.2.0

Related Commands

Command
Description

call answer

Answers an incoming call.

call end

Terminates the current call or calls.


Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products