Traps and Alarms Supported

Available Languages

Download Options

  • PDF     (429.9 KB)
    View with Adobe Reader on a variety of devices
Updated:November 2, 2007

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Traps and Alarms Supported

Table Of Contents

Traps and Alarms Supported

Overview

Traps Reference

AXSM Traps and Alarms

Line-Related Traps

SONET Line

DS3 Line

ATM Line-Related Traps

Virtual Interface-Related Traps

Resource Partition-Related Traps

Connection-Related Traps

Local Management Interface-Related Traps

Feeder-Related Traps

PXM Traps and Alarms

PNNI Traps and Alarms

RPM Traps

RPM Subinterface-Related Traps

Mandatory Trap Varbinds

Trap-Specific Varbinds


Traps and Alarms Supported

This chapter describes the traps and alarms used for AXSM, PXM45, PNNI, and RPM.

Contents of this chapter include:

•Overview

•Traps Reference

•AXSM Traps and Alarms

•PXM Traps and Alarms

•PNNI Traps and Alarms

•RPM Traps

•Mandatory Trap Varbinds

•Trap-Specific Varbinds

Each section on a service module trap provides the trap name, trap number, trap specific-variables (varbinds), and a description.

Note All mandatory trap varbinds are described in Table 7-13. For information about the miscellaneous trap varbinds, see Table 7-14.

Overview

Traps are messages used to inform the SNMP manager of a condition on the network. An agent can send unsolicited traps to the manager to notify the manager of network conditions. Traps indicate improper user authentication, restarts, up or down link status, TCP connection closure, or other significant events.

Traps Reference

Table 7-1 lists all the traps in numeric order, type of service module, and location.

Table 7-1 Traps Reference List 

Name
Number
Location
Service Module

cwChassisIntegratedAlarm

60001

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwUserLogin

60002

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwUserLogout

60003

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwShelfRestart

60004

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwNodeNameChange

60006

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwIpAddressChange

60007

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwControllerAdd

60008

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwControllerDelete

60009

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwDiskDbIntegCheckDone

60024

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwDiskDbIntegCheckFailed

60025

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwChassisTemperatureNormal

60026

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwChassisTemperatureAboveNormal

60027

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwChassisDclevelNormal

60028

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwChassisDclevelBelowNormal

60029

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwChassisPowersupplyNormal

60030

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwChassisPowersupplyFailed

60031

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwChassisFanrpmNormal

60032

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwChassisFanrpmBelowNormal

60033

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwChassisDclevelAboveNormal

60034

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwModuleInserted

60051

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwModuleRemoved

60052

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwModuleMismatch

60053

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwModuleActive

60055

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwModuleStandby

60056

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwModuleFailed

60057

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwLineModuleInserted

60058

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwLineModuleRemoved

60059

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwLineModuleMismatch

60060

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwLineModuleMismatchClear

60062

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwCoreCardSwitch

60078

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwRedundancyAdd

60079

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwRedundancyDelete

60080

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwRedundancyActivate

60081

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwRedundancyRevert

60082

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwSonetLineUp

60101

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetLineDown

60102

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetLineConfigChange

60103

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetLineInAlarm

60104

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetLineNoAlarm

60105

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetLineLpbkEnable

60106

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetLineLpbkDisable

60107

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetSectionStatAlarm

60108

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetLineStatAlarm

60109

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetPathStatAlarm

60110

For more information, see"SONET Line" section of this chapter.

AXSM

cwSonetApsEnable

60121

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetApsDisable

60122

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetApsLineFailure

60123

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetApsLineSwitch

60124

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetApsLineSwitchFailure

60125

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetApsRedundantLineInAlarm

60126

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetApsRedundantLineClear

60127

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetApsFailureClear

60128

For more information, see "SONET Line"section of this chapter.

AXSM

cwSonetApsConfigChange

60129

For more information, see "SONET Line"section of this chapter.

AXSM

cwSonetApsModeMismatch

60130

For more information, see "SONET Line" section of this chapter.

AXSM

cwSonetApsModeMismatchClear

60131

For more information, see "SONET Line" section of this chapter.

AXSM

cwDs3LineUp

60151

For more information, see "DS3 Line" section of this chapter.

AXSM

cwDs3LineDown

60152

For more information, see "DS3 Line" section of this chapter.

AXSM

cwDs3LineConfigChange

60153

For more information, see "DS3 Line" section of this chapter.

AXSM

cwDs3LineInAlarm

60154

For more information, see "DS3 Line" section of this chapter.

AXSM

cwDs3LineNoAlarm

60155

For more information, see "DS3 Line" section of this chapter.

AXSM

cwDs3LineLpbkEnable

60156

For more information, see "DS3 Line" section of this chapter.

AXSM

cwDs3LineLpbkDisable

60157

For more information, see "DS3 Line" section of this chapter.

AXSM

cwDs3StatAlarm

60158

For more information, see "DS3 Line" section of this chapter.

AXSM

cwDs3PlcpInAlarm

60159

For more information, see "DS3 Line" section of this chapter.

AXSM

cwDs3PlcpNoAlarm

60160

For more information, see "DS3 Line" section of this chapter.

AXSM

cwDs3PlcpStatInAlarm

60161

For more information, see "DS3 Line" section of this chapter.

AXSM

cwaChanAdd

60301

For more information, see "Connection-Related Traps" section of this chapter.

AXSM
RPM

cwaChanDelete

60302

For more information, see "Connection-Related Traps" section of this chapter.

AXSM
RPM

cwaChanActive

60303

For more information, see "Connection-Related Traps" section of this chapter.

AXSM
RPM

cwaChanFail

60304

For more information, see "Connection-Related Traps" section of this chapter.

AXSM
RPM

cwaChanConfigChange

60305

For more information, see "Connection-Related Traps" section of this chapter.

AXSM
RPM

cwaChanMultipleChanInAlarms

60306

For more information, see "Connection-Related Traps" section of this chapter.

AXSM
RPM

cwaChanDown

60307

For more information, see "Connection-Related Traps" section of this chapter.

AXSM
RPM

cwaChanUp

60308

For more information, see "Connection-Related Traps" section of this chapter.

AXSM
RPM

cwaChanMajorAlarm

60309

For more information, see "Connection-Related Traps" section of this chapter.

AXSM

cwaChanMinorAlarm

60310

For more information, see "Connection-Related Traps" section of this chapter.

AXSM

cwAtmIfAdd

60351

For more information, see "Virtual Interface-Related Traps" section of this chapter.

AXSM

cwAtmIfDelete

60352

For more information, see "Virtual Interface-Related Traps" section of this chapter.

AXSM

cwAtmIfUp

60353

For more information, see "Virtual Interface-Related Traps" section of this chapter.

AXSM

cwAtmIfDown

60354

For more information, see "Virtual Interface-Related Traps" section of this chapter.

AXSM

cwAtmIfConfigChange

60355

For more information, see "Virtual Interface-Related Traps" section of this chapter.

AXSM

cwAtmIfSctFileAlarm

60356

For more information, see "Virtual Interface-Related Traps" section of this chapter.

AXSM

cwAtmIfSctFileNoAlarm

60357

For more information, see "Virtual Interface-Related Traps" section of this chapter.

AXSM

cwCardIngSctFileAlarm

60358

For more information, see "Virtual Interface-Related Traps" section of this chapter.

AXSM

cwCardIngSctFileNoAlarm

60359

For more information, see "Virtual Interface-Related Traps" section of this chapter.

AXSM

cwCardIngSctFileIdChange

60360

For more information, see "Virtual Interface-Related Traps" section of this chapter.

AXSM

cwAtmPhyInAlarm

60371

For more information, see "ATM Line-Related Traps" section of this chapter.

AXSM

cwAtmPhyNoAlarm

60372

For more information, see "ATM Line-Related Traps" section of this chapter.

AXSM

cwAtmPhyConfigChange

60373

For more information, see "ATM Line-Related Traps" section of this chapter.

AXSM

cwRsrcPartAdd

60381

For more information, see "Resource Partition-Related Traps"section of this chapter.

AXSM
RPM

cwRsrcPartDelete

60382

For more information, see "Resource Partition-Related Traps" section of this chapter.

AXSM
RPM

cwRsrcPartConfigChange

60383

For more information, see "Resource Partition-Related Traps" section of this chapter.

AXSM
RPM

cwRpmSubIfAdd

60401

For more information, see "RPM Subinterface-Related Traps" section of this chapter.

RPM

cwRpmSubIfDelete

60402

For more information, see "RPM Subinterface-Related Traps" section of this chapter.

RPM

cwRpmSubIfUp

60403

For more information, see "RPM Subinterface-Related Traps" section of this chapter.

RPM

cwRpmSubIfDown

60404

For more information, see "RPM Subinterface-Related Traps" section of this chapter.

RPM

cwRpmSubIfConfigChange

60405

For more information, see "RPM Subinterface-Related Traps" section of this chapter.

RPM

cwRpmSubIfOperUp

60406

For more information, see "RPM Subinterface-Related Traps" section of this chapter

RPM

cwRpmSubIfOperDown

60407

For more information, see "RPM Subinterface-Related Traps" section of this chapter

RPM

cwRpmSubIfOperUnknown

60408

For more information, see "RPM Subinterface-Related Traps" section of this chapter

RPM

cwTrapsLost

60900

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM1
PXM45
AXSM
AXSM-E

cwBulkFileCreationStarted

60901

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwBulkFileCreationDone

60902

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwBulkFileCreationAborted

60903

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwBulkNoTaskAvailable

60904

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwBulkFileCreationFailed

60905

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwStatScmIpAddressChange

60920

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwStatFileInfo

60921

For more information, see "PXM Traps and Alarms" section of this chapter.

PXM45

cwFeederAdded

61001

For more information, see "Feeder-Related Traps" section of this chapter.

AXSM

cwFeederDeleted

61002

For more information, see "Feeder-Related Traps" section of this chapter.

AXSM

cwFeederLMIUp

61003

For more information, see "Feeder-Related Traps" section of this chapter.

AXSM

cwFeederLMIDown

61004

For more information, see "Feeder-Related Traps" section of this chapter.

AXSM

cwFeederConfigChange

61005

For more information, see "Feeder-Related Traps" section of this chapter.

AXSM

cwLMIAdded

61006

For more information, see "Local Management Interface-Related Traps" section of this chapter.

AXSM

cwLMIDeleted

61007

For more information, see "Local Management Interface-Related Traps" section of this chapter.

AXSM

cwLMIUp

61008

For more information, see "Local Management Interface-Related Traps" section of this chapter.

AXSM

cwlMIDown

61009

For more information, see "Local Management Interface-Related Traps" section of this chapter.

AXSM

cwLMIConfigChange

61010

For more information, see "Local Management Interface-Related Traps" section of this chapter.

AXSM

ciscoWANSscopLinkChange

70003

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45

ciscoWANControllerStateChange

70004

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45

ciscoWANIntfAddTrap

70005

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45

ciscoWANIntfDeleteTrap

70006

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45

ciscoWANIntfConfigurtaionChangeTrap

70007

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45

ciscoWANIntfOperationChangeTrap

70008

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45

ciscoWANSpvcFailTrap

70009

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45

ciscoWANPnniControllerStndbyFailed

70010

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45

ciscoWANSpvcNodePrefixChange

70011

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45

ciscoWANSpvcFailureTrap

70012

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45

ciscoWANClockChangeTrap

70013

For more information, see "PNNI Traps and Alarms" section of this chapter.

PXM45


AXSM Traps and Alarms

Traps are generated by the AXSM card on various actions. Examples of these actions are adding, deleting, or modifying resources and line failures.

The following are the three types of traps:

•Line-related traps include traps arising from the SONET, DS3, or ATM lines.

•Virtual interface-related traps are associated with ATM port addition, modification, and deletion.

•Connection-related traps are associated with channel addition, modification, and deletion.

AXSM traps and alarms include:

•Line-Related Traps

•Virtual Interface-Related Traps

•Resource Partition-Related Traps

•Connection-Related Traps

•Local Management Interface-Related Traps

•Feeder-Related Traps

Line-Related Traps

Line-related traps include traps created from fault conditions on the SONET, DS3, or ATM lines.

SONET Line

SONET line-related traps are presented in Table 7-2.

Table 7-2 SONET Line-Related Traps 

Name
Number
Specific Varbinds
Description

cwSonetLineUp

60101

ifIndex, ifName

This trap is sent when a SONET line is enabled.

cwSonetLineDown

60102

ifIndex, ifName

This trap is sent when a SONET line is disabled.

cwSonetLineConfigChange

60103

ifIndex, ifName

This trap is sent when a SONET line goes through any configuration change.

cwSonetLineInAlarm

60104

ifIndex, ifName, sonetSectionCurrentStatus, sonetLineCurrentStatus, sonetPathCurrentStatus, ssTraceFailure, cspTraceFailure

This trap is sent when the SONET line goes into alarm. The alarm status bitmap is one of the varbinds of the trap.

cwSonetLineNoAlarm

60105

ifIndex, ifName, sonetSectionCurrentStatus, sonetLineCurrentStatus, sonetPathCurrentStatus, cssTraceFailure, cspTraceFailure

This trap is sent when a SONET line alarm is cleared.

cwSonetLineLpbkEnable

60106

ifIndex, ifName, sonetSectionCurrentStatus, sonetLineCurrentStatus, sonetPathCurrentStatus

This trap is sent when loopback is enabled on a SONET line.

cwSonetLineLpbkDisable

60107

ifIndex, ifName, sonetSectionCurrentStatus, sonetLineCurrentStatus, sonetPathCurrentStatus

This trap is sent when loopback is disabled on SONET line.

cwSonetSectionStatAlarm

60108

ifIndex, ifName, cwsSectionStatAlarmStatus

This trap is sent when a SONET section layer encounters a statistical alarm.

cwSonetLineStatAlarm

60109

ifIndex, ifName, cwsLineStatAlarmStatus

This trap is sent when a SONET line layer encounters a statistical alarm.

cwSonetPathStatAlarm

60110

ifIndex, ifName, cwsPathStatAlarmStatus

This trap is sent when a SONET path layer encounters a statistical alarm.

cwSonetApsEnable

60121

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, ifName

This trap is sent when the APS feature is enabled on a SONET line.

cwSonetApsDisable

60122

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, ifName

This trap is sent when APS feature is disabled on a SONET line.

cwSonetApsLineFailure

60123

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, csApsLineFailureCode, ifName

This trap is sent when the SONET APS line encounters an abnormal condition.

cwSonetApsLineSwitch

60124

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, csApsLineSwitchReason, ifName

This trap is sent when the SONET line APS switch occurs.

cwSonetApsLineSwitch
Failure

60125

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, csApsLineSwitchReason, ifName

This trap is sent when an abnormal condition occurs during the SONET APS switch.

cwSonetApsRedundantLineInAlarm

60126

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, sonetSectionCurrentStatus, sonetLineCurrentStatus, sonetPathCurrentStatus, ifName

This trap is sent when the SONET APS redundant line is not in service.

cwSonetApsRedundantLine
Clear

60127

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, sonetSectionCurrentStatus, sonetLineCurrentStatus, sonetPathCurrentStatus, ifName

This trap is sent when the SONET APS redundant line alarm has been cleared.

cwSonetApsFailureClear

60128

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, csApsLineFailureCode, ifName

This trap is sent when the SONET APS line failure has been cleared.

cwSonetApsConfigChange

60129

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, ifName

This trap is sent when the SONET APS configuration parameters changes, for example, if signal degrade parameter changes.

cwSonetApsModeMismatch

60130

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, ifName

This trap is sent when the SONET APS architecture mode on the two ends of the APS pair is different. This mismatch does not cause an APS failure; the mode on one end is automatically changed to match the other end.

cwSonetApsModeMismatchClear

60131

cwTrapIndex, csApsProtectionIndex, csApsActiveLine, ifName

This trap is sent when the SONET APS architecture mode mismatch is cleared.


DS3 Line

DS3 Line-related traps are presented in Table 7-3.

Table 7-3 DS3 Line Related Traps 

Name
Number
Specific Varbinds
Description

cwDs3LineUp

60151

ifIndex, ifName

This trap is sent when a DS3 line is enabled.

cwDs3LineDown

60152

ifIndex, ifName

This trap is sent when a DS3 line is disabled.

cwDs3LineConfigChange

60153

ifIndex, ifName

This trap is sent when a DS3 line goes through any configuration change.

cwDs3LineInAlarm

60154

ifIndex, ifName, dsx3LineStatus

This trap is sent when the DS3 line goes into alarm. The alarm status bitmap is one of the varbinds of the trap.

cwDs3LineNoAlarm

60155

ifIndex, ifName, dsx3LineStatus

This trap is sent when a DS3 line alarm is cleared.

cwDs3LineLpbkEnable

60156

ifIndex, ifName, dsx3LineStatus

This trap is sent when loopback is enabled on a DS3 line.

cwDs3LineLpbkDisable

60157

ifIndex, ifName, dsx3LineStatus

This trap is sent when loopback is disabled on SONET line.

cwDs3StatAlarm

60158

ifIndex, ifName, cds3LineStatisticalAlarmState

This trap is sent when a DS3 line encounters a statistical alarm.

cwDs3PlcpInAlarm

60159

ifIndex, ifName, cds3PlcpLineAlarmState

This trap is sent when a DS3 Plcp line encounters an alarm.

cwDs3PlcpNoAlarm

60160

ifIndex, ifName, cds3PlcpLineAlarmState

This trap is sent when a DS3 Plcp alarm is cleared.

cwDs3PlcpStatInAlarm

60161

ifIndex, ifName, cds3PlcpLineStatistical
AlarmState

This trap is sent when a DS3 Plcp line encounters a statistical alarm.


ATM Line-Related Traps

ATM line-related traps are presented in Table 7-4.

Table 7-4 ATM Line-Related Traps 

Name
Number
Specific-Varbinds
Description

cwAtmPhyInAlarm

60371

ifIndex, ifName

This trap is sent when physical ATM cell layer loss of cell delineation occured.

cwAtmPhyNoAlarm

60372

ifIndex, ifName

This trap is sent when physical ATM cell layer loss of cell delineation alarm cleared.

cwAtmPhyConfigChange

60373

ifIndex, ifName

This trap is sent when ATM cell layer configuration changes.


Virtual Interface-Related Traps

The virtual interface-related traps are presented in Table 7-5.

Table 7-5 Virtual Interface-Related Traps 

Name
Number
Specific Varbinds
Description

cwAtmIfAdd

60351

ifIndex, ifName, caviFileId

This trap is sent when an ATM port is deleted.

cwAtmIfDelete

60352

ifIndex, ifName

This trap is sent when an ATM port is deleted.

cwAtmIfUp

60353

ifIndex, ifName

This trap is sent when an ATM port is enabled.

cwAtmIfDown

60354

ifIndex, ifName

This trap is sent when an ATM port is disabled.

cwAtmIfConfigChange

60355

ifIndex, ifName

This trap is sent when an ATM port configuration changes.

cwAtmIfSctFileAlarm

60356

ifIndex, ifName, caviFileId

This trap is sent when the SCT file associated with an ATM port is detected to be missing or corrupted.

cwAtmIfSctFileNoAlarm

60357

ifIndex, ifName

This trap is sent when the ATM port comes out of the failed state because of a corrupt or missing SCT file.

cwCardIngSctFileAlarm

60358

ifIndex, cwmIngressSCTFileId

This trap is sent when the ingress SCT file for a card is detected as missing or corrupted on a switch over.

cwCardIngSctFileNoAlarm

60359

ifIndex, cwmIngressSCTFileId

Card ingress SCT file alarm cleared.

cwCardIngSctFileIdChange

60360

ifIndex, cwmIngressSCTFileId

Card ingress SCT file id is changed.


Resource Partition-Related Traps

The resource partition-related traps are listed in Table 7-6.

Note The resource partition-related traps are also supported by RPM.

Table 7-6 Resource Partition-Related Traps 

Name
Number
Specific Varbinds
Description

cwRsrcPartAdd

60381

ifIndex,
ifName,
cwTrapIndex,
cwRsrcPartController

This trap is sent when a resource partition is added on the logical port by the ifindex object.

The cwRsrcPartVpiLo object contains the cwRsrcPartID value.

The cwTrapIndex object contains the cwRsrcPartController value.

cwRsrcPartDelete

60382

ifIndex,
ifName,
cwTrapIndex,
cwRsrcPartController

This trap is sent when a resource partition is deleted by the logical port by the ifindex object.

The cwRsrcPartVpiLo object contains the cwRsrcPartID value.

The cwTrapIndex object contains the cwRsrcPartController value.

cwRsrcPartConfig
Change

60383

ifIndex,
ifName,
cwTrapIndex,
cwRsrcPartController

This trap is sent when the configuration for the resource partition is changed.

The cwRsrcPartVpiLo object contains the cwRsrcPartID value.

The cwTrapIndex object contains the cwRsrcPartController value.

The following are the modified objects:

•cwRsrcPartEgrMinBw

•cwRsrcPartEgrMaxBw

•cwRsrcPartIngMinBw

•cwRsrcPartIngMaxBw

•cwRsrcPartVpiLo

•cwRsrcPartVpiHigh

•cwRsrcPartVciLo

•cwRsrcPartVciHigh

•cwRsrcPartMinCon

•cwRsrcPartMaxCon


Connection-Related Traps

Connection-related traps are described in Table 7-7.

Note The applicable connection-related traps are also supported by RPM.

.

Table 7-7 Connection-Related Traps 

Name
Number
Specific Varbinds
Description

cwaChanAdd1

60301

ifIndex, ifName, cwaChanLocalVpi, cwaChanLocalVci, cwaChanVpcFlag, cwaChanIdentifier, cwaChanUploadCounter

This trap is sent when either a Virtual Path Connection (VPC) or Virtual Channel Connection (VCC) gets added.

The cwaChanLocalVpi object contains a value for cwaChanVpi. The cwaChanLocalVci object contains a value for cwaChanVci.

cwaChanDelete1

60302

ifIndex, ifName, cwaChanLocalVpi, cwaChanLocalVci, cwaChanVpcFlag, cwaChanIdentifier, cwaChanUploadCounter

This trap is sent when a channel gets deleted.

The cwaChanLocalVpi object contains a value for cwaChanVpi. The cwaChanLocalVci object contains a value for cwaChanVci.

cwaChanActive1

60303

ifIndex, ifName, cwaChanLocalVpi, cwaChanLocalVci, cwaChanVpcFlag, cwaChanIdentifier, cwaChanUploadCounter

This trap is sent when a channel gets added or modified.

The cwaChanLocalVpi object contains a value for cwaChanVpi. The cwaChanLocalVci object contains a value for cwaChanVci.

cwaChanFail1

60304

ifIndex, ifName, cwaChanLocalVpi, cwaChanLocalVci, cwaChanVpcFlag, cwaChanIdentifier, cwaChanAlarmState, cwaChanEgressXmtState, cwaChanEgressRcvState, cwaChanIngressXmtState, cwaChanIngressRcvState

This trap is sent when there is a channel failure.

The cwaChanLocalVpi object contains a value for cwaChanVpi. The cwaChanLocalVci object contains a value for cwaChanVci.

cwaChanConfig
Change1

60305

ifIndex, ifName, cwaChanLocalVpi, cwaChanLocalVci, cwaChanVpcFlag, cwaChanIdentifier, cwaChanUploadCounter

This trap is sent when channel parameters are changed.

The cwaChanLocalVpi object contains a value for cwaChanVpi. The cwaChanLocalVci object contains a value for cwaChanVci.

cwaChanMultiple
ChanInAlarms1

60306

none

This trap is sent when many channels are in an alarm state.

The cwaChanMultipleChanInAlarms trap replaces the failed traps for each connection. The cwaChanMultipleChanInAlarms trap is sent during a regular interval as long as the alarm condition exists. For example, if Cisco WAN Manager does not receive another trap in the next minute, it uploads a connection alarm file to the database to synchronize with the condition of the node or connection.

cwaChanDown1

60307

ifIndex,
ifName,
cwaChanLocalVpi,
cwaChanLocalVci,
cwaChanVpcFlag,
cwaChanIdentifier,
cwaChanUploadCounter

This trap is sent when a channel is down.

cwaChanUp1

60308

ifIndex,
ifName,
cwaChanLocalVpi,
cwaChanLocalVci,
cwaChanVpcFlag,
cwaChanIdentifier,
cwaChanUploadCounter,
cwaChanOperStatus

This trap indicates that a VP/VC is administratively up.

The cwaChanLocalVpi object contains cwaChanVpi value. The cwaChanLocalVci object contains a cwaChanVci value.

cwaChanMajor
Alarm

60309

ifIndex, ifName, cwaChanLocalVpi, cwaChanLocalVci, cwaChanVpcFlag, cwaChanIdentifier, cwaChanAlarmState, cwaChanOperStatus, cwaChanEgressXmtState, cwaChanEgressRcvState, cwaChanIngressXmtState, cwaChanIngressRcvState

This trap indicates a connection failure.

The indications of a cwaChanMajorAlarm include:

•The endpoint is conditioned, for example, derouted.

•Call control (CC) failure.

•Mismatch in the database configuration and hardware configuration.

The cwaChanAlarmState object in the cwaChanMajorAlarm trap contains a bitmap representation of all possible alarm conditions on VCC/VPC.

When the cwaChanMajorAlarm trap notification is sent, the cwaChanOperStatus is set to oper_status=FAIL(2).

The cwaChanLocalVpi object contains the cwaChanVpi value. The cwaChanLocalVci object contains the cwaChanVci value.

cwaChanMinor
Alarm

60310

ifIndex, ifName, cwaChanLocalVpi, cwaChanLocalVci, cwaChanVpcFlag, cwaChanIdentifier, cwaChanAlarmState, cwaChanOperStatus, cwaChanEgressXmtState, cwaChanEgressRcvState, cwaChanIngressXmtState, cwaChanIngressRcvState

This trap indicates a failure outside the network and is reflected in oper_status=OK. When the cwaChanMinorAlarm trap notification is sent, the cwaChanOperStatus is set to operOk(1).

The indications of a cwaChanMinorAlarm include:

•Detects Ingress Alarm Indication Signal (AIS).

•Detects Egress Alarm Indication Signal (AIS).

•Detects Ingress A-bit alarm.

The cwaChanAlarmState object in the cwaChanMinorAlarm trap contains a bitmap representation of all possible alarm conditions on VCC/VPC.

The cwaChanLocalVpi object contains the cwaChanVpi value. The cwaChanLocalVci object contains the cwaChanVci value.

1 This connection-related trap is also supported by RPM.


Local Management Interface-Related Traps

The Local Management Interface (LMI) traps are listed in Table 7-8.

Table 7-8 Local Management Interface-Related Traps 

Name
Number
Specific-Varbinds
Description

cwLMIAdded

61006

cwTrapIndex,
cwfLMIType

Configures the new atmVirtualInterface port as XLMI.

Note cwTrapIndex is the interface index.

cwLMIDeleted

61007

cwTrapIndex,
cwfLMIType

Configures the previous atmVirtualInterface port to run XLMI.

Note cwTrapIndex is the interface index.

cwLMIUp

61008

cwTrapIndex,
cwfLMIType

Determines that the LMI connection is UP.

cwlMIDown

61009

cwTrapIndex,
cwfLMIType

Determines that the LMI connection is DOWN.

cwLMIConfigChange

61010

cwTrapIndex,
cwfLMIType

Determines that the IP address, node name, and node status changes.


Feeder-Related Traps

The feeder-related traps are listed in Table 7-9.

Table 7-9 Feeder-Related Traps 

Name
Number
Specific-Varbinds
Description

cwFeederAdded

61001

cwTrapIndex

This trap is sent when a feeder is added on a service module. The cwTrapIndex object contains the value of cwfFeederIfNum in the cwfFeederTable.

cwFeederDeleted

61002

cwTrapIndex

This trap is sent when the feeder is deleted on service module. The cwTrapIndex object contains the value of cwfFeederIfNum in the cwfFeederTable.

cwFeederLMIUp

61003

cwTrapIndex

This trap is sent when the LMI connection is established after the feeder is added. The cwTrapIndex object contains the value of cwfFeederIfNum in the cwfFeederTable.

cwFeederLMIDown

61004

cwTrapIndex

This trap is sent when the LMI for the feeder port is disconnected. The cwTrapIndex object contains the value of cwfFeederIfNum in the cwfFeederTable.

cwFeederConfigChange

61005

cwTrapIndex

This trap is sent when the feeder node configuration changes. This trap is sent when the following objects are modified in the feeder node:

•cwfFeederName

•cwfLanIP

•cwfNetIP

The object cwTrapIndex contains the value of cwfFeederIfNum in the cwfFeederTable.


PXM Traps and Alarms

The various PXM45 traps and alarms are listed in Table 7-10.

Table 7-10 PXM45 Traps and Alarms 

Name
Number
Specific Varbinds
Description

cwChassisIntegrated
Alarm

60001

shelfIntegratedAlarm

This trap is sent when the integrated alarm for the shelf is changed.

cwUserLogin

60002

userName

This trap is sent when a user logs in.

cwUserLogout

60003

userName

This trap is sent when a user logs out.

cwShelfRestart

60004

cefcModuleResetReason

This trap is sent when the shelf is rebooted.

cwNodeNameChange

60006

none

This trap is sent when the node name is modified.

cwIpAddressChange

60007

ipAdEntAddr, ifType

This trap is sent when the IP Address
(Ethernet IP, ATM IP) is modified.

cwControllerAdd

60008

cwTrapIndex, cvcConfControllerType, cvcConfControllerLocation

This trap is sent when a VSI Controller is added.

cwControllerDelete

60009

cwTrapIndex, cvcConfControllerType, cvcConfControllerLocation

This trap is sent when a VSI Controller is deleted.

cwDiskDbIntegCheck
Done

60024

none

This trap is sent when the integrity check is finished for all the configured modules in the shelf, and database corruption was not found on any slot. The entPhysicalParentRelPos object contains the physical slot number.

cwDiskDbIntegCheck
Failed

60025

cwTrapOctetString

This trap is sent when there is a corruption of configuration on disk.

The trap shows the logical slots whose configuration stored on disk is corrupted.

The cwTrapOctetString varbind is an octet string, which contains a list of slot numbers whose database is corrupted.

This trap is sent immediately after the integrity check is finished checking Disk Db for all slots. The entPhysicalParentRelPos contains the physical slot number.

cwChassisTemperature
Normal

60026

cwTrapIndex, entSensorThresholdSeverity

This trap is sent when the temperature is back to normal.

cwChassisTemperature
AboveNormal

60027

entSensorThresholdSeverity,
cwTrapIndex

This trap is sent when the temperature is above the threshold.

cwChassisDclevel
Normal

60028

entSensorThresholdSeverity,
cwTrapIndex

This trap is sent when the DC Level is back to normal.

cwChassisDclevelBelow
Normal

60029

entSensorThresholdSeverity,
cwTrapIndex

This trap is sent when the DC level is below the normal range.

cwChassisPowersupply
Normal

60030

entSensorThresholdSeverity,
cwTrapIndex

This trap is sent when the power supply is back to normal voltage.

cwChassisPowersupply
Failed

60031

entSensorThresholdSeverity,
cwTrapIndex

This trap is sent when the power supply has failed.

cwChassisFanrpm
Normal

60032

entSensorThresholdSeverity,
cwTrapIndex

This trap is sent when the fan RPM is back to normal.

cwChassisFanrpm
BelowNormal

60033

entSensorThresholdSeverity,
cwTrapIndex

This trap is sent when the fan RPM is below the normal value.

cwChassisDclevelAbove
Normal

60034

cwTrapIndex

This trap is sent when the shelf DC level is above the normal DC level.

The cwTrapIndex contains the entPhysicalIndex value for the DC level monitoring device.

cwModuleInserted

60051

cwTrapIndex

This trap is sent when the Front Module is plugged into a slot. It is also sent for the Processor Module as well as Service Modules when they are plugged in.

cwModuleRemoved

60052

cwTrapIndex

This trap is sent when the Front Module is removed from the slot. It is also sent for the Processor Module and service modules when they are removed.

cwModuleMismatch

60053

cefcModuleOperStatus, cwTrapPhysicalVendorType, cwTrapIndex

This trap is sent when the Front Module is plugged into a slot which was configured with another module earlier.

cwModuleActive

60055

cwTrapIndex

This trap is sent when a module becomes active. This happens due to a switchover or when a failed card becomes active.

cwModuleStandby

60056

cwTrapIndex

This trap is sent when a module becomes standby due to switchover.

cwModuleFailed

60057

cefcModuleOperStatus, cwTrapIndex

This trap is sent when a module goes to a failed state.

cwLineModuleInserted

60058

cwTrapPhysicalVendorType, cwTrapLineModuleNumber, cwTrapIndex

This trap is sent when a line module (back card) is inserted.

cwLineModuleRemoved

60059

cwTrapPhysicalVendorType, cwTrapIndex

This trap is sent when a line module (back card) is removed.

cwLineModule
Mismatch

60060

cefcModuleOperStatus, cwTrapPhysicalVendorType, cwTrapLineModuleNumber, cwTrapIndex

This trap is sent when a incompatible line module (back card) is inserted into the front module or an inserted line module is not the same as the one configured earlier.

cwLineModule
MismatchClear

60062

cefcModuleOperStatus,
cwTrapPhysicalVendorType,
cwTrapLineModuleNumber,
cwTrapIndex

This trap is sent when a line module mismatch is cleared.

entPhysicalParentRelPos contains the physical slot number of the module.

entPhysicalVendorType contains the type of the module.

After a mismatch is cleared, cwTrapPhysicalVendorType contains the line module type.

cwTrapLineModuleNumber contains the line module number.

cwTrapIndex contains the entPhysicalIndex value for the line module that was in a mismatch, but cleared now.

cwCoreCardSwitch

60078

cwTrapSlotNumber, cwTrapIndex

This trap is sent when there is a switchover for core card set.

cwRedundancyAdd

60079

cwTrapSlotNumber

This trap is sent when redundancy is added for a module pair.

cwRedundancyDelete

60080

cwTrapSlotNumber

This trap is sent when a module pair is deleted from the redundancy configuration.

cwRedundancyActivate

60081

cwTrapSlotNumber

This trap is sent when a secondary module becomes active. This is due to a switchover.

cwRedundancyRevert

60082

cwTrapSlotNumber

This trap is sent when a primary module becomes active. This is due to a switchover.

cwTrapsLost1

60900

none

This trap is sent when some traps could not be sent to the network management stations due to following reasons:

•Trap could not be sent from the service module to the processor module.

•Trap buffer is overflowed.

cwBulkFileCreation
Started

60901

cbfDefineMaxFiles

This trap is sent when the bulk file creation is started.

cwBulkFileCreation
Done

60902

cbfDefineMaxFiles, cbfDefineFileName, cbfStatusFileCompletionTime

This trap is sent when the bulk file creation is done.

cwBulkFileCreation
Aborted

60903

cbfDefineMaxFiles, cbfStatusFileState

This trap is sent when the bulk file creation is aborted.

cwBulkNoTask
Available

60904

cbfDefineMaxFiles

This trap is sent when the bulk file creation fails due to nonavailability of the task.

cwBulkFileCreation
Failed

60905

cbfDefineMaxFiles

This trap is sent when the bulk file creation is fails for reasons other than the nonavailability of the task.

cwStatScmIpAddress
Change

60920

cwTrapIndex,
cwsConfIpAddress

This trap is sent for the following conditions:

•SCM IP address is added.

•SCM IP address is deleted.

•SCM IP address is modified.

cwTrapIndex contains the value of the cwsConfIndex, which contains the IP address entry added, deleted, or modified.

When the IP address is added or modified, the cwConfIpAddress contains the value of the IP address.

When the IP address is deleted, the cwConfIpAddress contains the value of zero for the IP address.

cwStatFileInfo

60921

cwsStatsFileInfo

This trap is sent for the following conditions:

•One or more statistics files are created.

•In a certain time, one or more statistics files are not uploaded by SCM since it was created.

1 This trap is also applicable to PXM1, AXSM, and AXSM-E.


PNNI Traps and Alarms

PNNI traps and alarms are listed in Table 7-11.

Note PNNI traps and alarms are supported by PXM45.

Table 7-11 PNNI List of Traps 

Name
Number
Specific Varbinds
Description

ciscoWANSscopLink
Change

70003

ifIndex, cwspPhyIdentifier, cwspSscopStatus

This trap is sent if the Sscop link status is failed or established.

ciscoWANControllerState
Change

70004

cwspPnniControllerStatus, cwspPnniControllerPhySlot

This trap is sent when the PNNI controller is either active or standby.

ciscoWANIntfAddTrap

70005

ifIndex, cwspPhyIdentifier

This trap is sent to add an interface.

ciscoWANIntfDeleteTrap

70006

ifIndex, cwspPhyIdentifier

This trap is sent to delete an interface.

ciscoWANIntfConfigurtaionChangeTrap

70007

ifIndex, cwspPhyIdentifier

This trap is sent to change the configuration for an interface. The ciscoWANIntfConfigurtaionChangeTrap trap is received when a SVC port named nni_version is modified.

ciscoWANIntfOperation
ChangeTrap

70008

ifIndex, cwspPhyIdentifier, cwspOperStatus, cwspOperIfcType, cwspOperFailReason

This trap is sent to change the operation status for an interface.

ciscoWANSpvcFailTrap

70009

ifIndex, cwspConnTraceSrcVpi, cwspConnTraceSrcVci, cwspCallCallingAddress, ciscoWANSpvcFailReason

This trap is sent when the Soft Permanent Virtual Connection (SPVC) failure is recognized in the PNNI controller.

ciscoWANPnniController
StndbyFailed

70010

cwspPnniControllerPhySlot

This trap is sent when the PNNI standby controller fails.

ciscoWANSpvcNodePrefix
Change

70011

cwspSpvcNodePrefix

This trap is sent when the SPVC node prefix is changed. The cwspSpvcNodePrefix can contain the updated prefix.

ciscoWANSpvcFailure
Trap

70012

ifIndex,
cwspPhyIdentifier,
cwspConnTraceSrcVpi,
cwspConnTraceSrcVci,
cwspCallCallingAddress,
ciscoWANSpvcFailReason

This trap is sent when the PNNI controller sends this notification when the SPVC manager for the controller recognizes a failure.

This trap deprecates trap ciscoWANSpvcFailTrap (70009).

Note All the MIB objects here are for trap usage only.

SNMP Get and GetNext is not meaningful for those objects.

ciscoWANClockChange
Trap

70013

cwTrapDisplayString

This trap is sent when the PNNI controller sends this notification when the clock source changed on the switch.

The cwTrapDisplayString varbind contains a description of the new clock source.

This string contains the port number of the clock source or the string internal oscillator.

The following are the port numbers:

•7.35 E1

•7.35 T1

•7.36 E1

•7.36 T1 or in the format of slot:subslot.port:subport. For example, 5:1.2:2 or internal oscillator for the internal clock.


RPM Traps

The Router Processor Module (RPM) traps include the subinterface-related traps.

RPM Subinterface-Related Traps

The RPM subinterface-related traps are used to report any status changes on an RPM backplane subinterface. These traps are listed in Table 7-12.

Table 7-12 RPM Subinterface-Related Traps 

Name
Number
Specific Varbinds
Description

cwRpmSubIfAdd

60401

cwTrapIndex,
ifIndex,
cwrSubIfAdapterIf

This trap is sent when a subinterface is added. The cwTrapIndex object contains the cwrSubIfSlotNum value. The ifIndex object contains the cwrSubIfNum value.

cwRpmSubIfDelete

60402

cwTrapIndex,
ifIndex,
cwrSubIfAdapterIf

This trap is sent when a subinterface is deleted. The cwTrapIndex object contains the cwrSubIfSlotNum value. The ifIndex object contains the cwrSubIfNum value.

cwRpmSubIfUp

60403

cwTrapIndex,
ifIndex,
cwrSubIfAdapterIf

This trap is sent when a subinterface is up. The cwTrapIndex object contains the cwrSubIfSlotNum value. The ifIndex object contains the cwrSubIfNum value.

cwRpmSubIfDown

60404

cwTrapIndex,
ifIndex,
cwrSubIfAdapterIf

This trap is sent when a subinterface is down. The cwTrapIndex object contains the cwrSubIfSlotNum value. The ifIndex object contains the cwrSubIfNum value.

cwRpmSubIfConfigChange

60405

cwTrapIndex,
ifIndex,
cwrSubIfAdapterIf

This trap is sent when a subinterface configuration is changed. The cwTrapIndex object contains the cwrSubIfSlotNum value. The ifIndex object contains the cwrSubIfNum value.

cwRpmSubIfOperUp

60406

cwTrapIndex,
ifIndex,
cwrSubIfAdapterIf

This trap is sent when a subinterface operational status is upped. The cwTrapIndex object contains the cwrSubIfSlotNum value. The ifIndex object contains the cwrSubIfNum value.

cwRpmSubIfOper
Down

60407

cwTrapIndex,
ifIndex,
cwrSubIfAdapterIf

This trap is sent when a subinterface operational status is downed. The cwTrapIndex object contains the cwrSubIfSlotNum value. The ifIndex object contains the cwrSubIfNum value.

cwRpmSubIfOper
Unknown

60408

cwTrapIndex,
ifIndex,
cwrSubIfAdapterIf

This trap is sent when a subinterface operational status is other than up or down. The cwTrapIndex object contains the cwrSubIfSlotNum value. The ifIndex object contains the cwrSubIfNum value.


Mandatory Trap Varbinds

Table 7-13 lists the trap varbinds in each trap generated by the switch. Each of these varbinds, in the order given, is available for each trap generated.

Table 7-13 Mandatory Trap Varbinds 

Varbind
Data Type
Description

lastSequenceNumber

INTEGER

Contains the sequence number assigned to the trap. This can be used by NMS applications to implement a Robust Trap Mechanism.

sysName

OctetString

Contains the node name of the switch.

entPhysicalContainedIn

INTEGER(0..2147483647)

Contains the chassis number into which the module is connected.

entPhysicalParentRelPos

INTEGER(-1..2147483647)

Contains the physical slot number to into which the module is connected.

entPhysicalVendorType

ObjectID

Contains the type of module for which the trap is generated.

moduleTrapAlarm Severity

INTEGER (enumeration)

Contains the alarm severity of the trap.

genericTimeStamp

OctetString(1..30)

Contains the time when the trap is generated.


Trap-Specific Varbinds

The trap-specific varbinds used for the applicable service module are listed in Table 7-14.

Table 7-14 Trap-Specific Varbinds 

Varbind
Syntax
Description
Service Module

ifIndex

Integer32(1..2147483647)

Specifies a unique value, greater than 0, for each interface. It is recommended that values are assigned starting with 1.

AXSM PXM45 RPM

ifName

OctetString(0..255)

Indicates the textual name of the interface.

AXSM PXM45

sonetSectionCurrentStatus

Integer32(1..6)

Indicates the section status of the interface.

AXSM

sonetLineCurrentStatus

Integer32(1..6)

Indicates the line status of the interface.

AXSM

sonetPathCurrentStatus

Integer32(1..62)

Indicates the path status of the interface

AXSM

dsx3LineStatus

INTEGER(1..4095)

Indicates the line status of the interface. It is used for loopback state information and failure state information.

AXSM

csApsProtectionIndex

Integer32(1..2147483647)

Indicates that the protection line becomes an active line when an APS switch occurs (APS switch can occur because of a failure on the working line).

AXSM

csApsActiveLine

INTEGER(enumeration)

Indicates which line is currently active.

AXSM

csApsLineFailureCode

INTEGER(enumeration)

Specifies the SONET APS line failure code, or the failure encountered by the APS line.

AXSM

cssTraceFailure

INTEGER(enumeration)

Specifies that the value of this object is set to true when the SONET section received trace does not match the cssTraceToExpect.

AXSM

cspTraceFailure

INTEGER(enumeration)

Sets the value of this object to true when the trace received by the SONET Path does not match the cspTraceToExpect.

AXSM

csApsLineSwitchReason

INTEGER(enumeration)

When the working line on one end fails, its other end is told to do an APS switch.

AXSM

cds3PlcpLineAlarmState

Gauge32

Specifies a bitmap of the DS3 Line Alarms. A value of 0 for this object indicates no alarms.

AXSM

cds3PlcpLineStatistical
AlarmState

Gauge32

Specifies a bitmap of the DS3 PLCP Line Statistical Alarms.

AXSM

cds3LineStatisticalAlarm
State

Gauge32(0..2147483647)

Specifies a bitmap of the DS3 Line Statistical Alarms.

AXSM

caviFileId

Gauge32

Determines the ID of the file that holds module-specific configuration parameters for this ATM Virtual Interface.

AXSM

cwmIngressSCTFileId

Gauge32(0..255)

Defines the file ID of the Service Class Template (SCT) file.

AXSM

cwsLineStatAlarmStatus

Gauge32

Indicates the status of the SONET line.

AXSM

cwsPathStatAlarmStatus

Gauge32

Indicates the status of the interface. The cwsPathStatAlarmStatus is a bitmap represented as a sum; therefore, it can represent multiple defects simultaneously.

AXSM

cwTrapIndex

Integer32(0..2147483647)

Contains the value that is indexed to any table.

AXSM PXM45 RPM

cwfLMIType

INTEGER { feeder(1), xLMI(2)}

Identifies the Local Management Interface (LMI) type used for the network to connect to the LMI port.

AXSM

cwRsrcPartController

Unsigned32 (1.. 255)

Specifies the controller identifier.

AXSM

cwaChanLocalVpi

Gauge32(0..4095)

Identifies the internal VPI assigned to a local endpoint by the switch.

AXSM

cwaChanLocalVci

Gauge32(0..65535)

Identifies the internal VCI assigned to a local endpoint by the switch.

AXSM

cwaChanVpcFlag

INTEGER (enumeration)

Identifies whether or not there is a VP/VC endpoint.

AXSM

cwaChanIdentifier

Gauge32

Represents a resource at the switch that has been assigned for this connection (identified by cwaChanVpi and cwaChanVci).

AXSM

cwaChanUploadCounter

Gauge32

Tracks the number of configuration changes that happen on a cwaChanIdentifier.

AXSM

cwaChanOperStatus

CiscoWanOperStatus

Reflects the operational status of an endpoint.

AXSM
RPM

cwaChanAlarm
State

INTEGER (enumeration)

Defines the alarms associated with an endpoint.

AXSM

cwaChanEgressXmtState

INTEGER

Specifies the state of the transmit portion of the endpoint in the egress direction.

AXSM

cwaChanEgressRcvState

INTEGER

Specifies the state of the receive portion of the endpoint in the egress direction.

AXSM

cwaChanIngressXmtState

INTEGER

Specifies the state of the transmit portion of the endpoint in the ingress direction.

AXSM

cwaChanIngressRcvState

INTEGER

Specifies the state of the receive portion of the endpoint in the ingress direction.

AXSM

shelfIntegratedAlarm

INTEGER

Displays the alarm status of the shelf.

PXM45

userName

OctetString(1..20)

Displays the username of the person logging in or logging out.

PXM45

cefcModuleResetReason

INTEGER

Identifies the reason for the last reset performed on the module.

PXM45

ipAdEntAddr

IpAddress

Specifies the IP address to which this entry addressing information pertains.

PXM45

ifType

INTEGER

Indicates the type of interface.

PXM45

cvcConfControllerType

INTEGER

Identifies the controller type.

PXM45

cvcConfController
Location

Integer32(1..2147483647)

Identifies the location of the controller.

PXM45

entSensorThresholdSeverity

INTEGER

Indicates the severity of the sensor threshold.

PXM45

cefcModuleOperStatus

INTEGER

Shows the operational state of the module.

PXM45

cwTrapPhysicalVendorType

ObjectID

Contains the entPhysicalVendorType value for the physical entity.

PXM45

cwTrapLineModuleNumber

Integer32(1..4)

Contains the value for the entPhysicalParentRelPos object for line modules.

PXM45

cwTrapSlotNumber

Integer32(1..64)

Contains the slot number of the module

PXM45

cwTrapOctetString

OCTET STRING (SIZE (0..1024))

Contains the octet string value.

PXM45

cbfDefineMaxFiles

Gauge32

Determines the maximum number of file definitions that this system can hold in the cbfDefineFile table. A value of 0 indicates no configured limit.

Note This object can be read-only on some systems because it is applicable only in traps.

If the number is changed, it does not disturb existing entries.

PXM45

cbfDefineFileName

OctetString(1..255)

Creates the filename. Explicit device or path choices in the value of this object can override cbfDefineFileStorage.

PXM45

cwspPhyIdentifier

OctetString(0..255)

Indicates the physical identification of the interface.

PXM45

cwspSscopStatus

INTEGER

Specifies the Sscop link status on an Network-to-Network Interface (NNI).

PXM45

cwspPnniControllerStatus

INTEGER (enum)

Specifies the administrative status of the PNNI controller.

PXM45

cwspPnniControllerPhySlot

Integer32

Specifies the PNNI controller physical location.

PXM45

cwspOperStatus

INTEGER

Specifies the operational state of the interface.

PXM45

cwspOperIfcType

INTEGER

Specifies the interface type.

PXM45

cwspOperFailReason

INTEGER

Defines the SVC port failures.

Note This object is used only for a trap varbind.

NMS applications should not use issue SNMP Get and GetNextRequests for this object.

PXM45

cwspConnTraceSrcVpi

Integer32(0..4095)

Shows the VPI value of the starting point on this interface.

PXM45

cwspConnTraceSrcVci

Integer32(0..65535)

Shows the VCI value of the starting point on this interface.

PXM45

cwspCallCallingAddress

OctetString

Shows the calling party address of the call.

PXM45

ciscoWANSpvcFailReason

INTEGER (enumeration)

Defines the SPVC manager failures.

Note This object is used only for a trap varbind.

NMS applications should not depend on the implementation of this object. SNMP Get and GetNextRequests are not valid for this object.

PXM45

cwspSpvcNodePrefix

OctetString(13..13)

Specifies that write access is currently not permitted.

PXM45

cwrSubIfAdapterIf

Unsigned32

Maps to the RPM for port adapter interface.

RPM

cwTrapDisplayString

DisplayString

Contains the display string value.

PXM45

cwsConfIpAddress

IpAddress

Specifies the IP address of the SCM.

PXM45

cwsStatsFileInfo

OCTET STRING (SIZE(0..512))

Contains information on statistics related files.

The statistics files are uploaded and downloaded using a file transfer mechanism FTP, TFTP, and so forth. The downloaded and uploaded files are available from a nonvolatile storage, for example, hard disk, flash disk, and so forth.

The following categories are used for the statistics file:

•stats upload file—Contains statistics data. These files can be uploaded only from the switch.

•stats enable file—Contains the statistics that have to be enabled or disabled in one or more modules. These files can be downloaded as well as uploaded to or from the switch.

This object can contain one or more records of files that were created, not uploaded in time, or uploaded and downloaded.

Along with the filename, each record contains type of operation (created, uploaded, downloaded major trap, or critical trap) and number of applicable failed attempts.

The values for each of the fields in the OCTET STRING depends upon the file categories stats upload, stats enable, and so forth.

The following is the object layout:

NumOfRecords (SIZE(1))
RECORD (SIZE(23))
Filename STRING (SIZE(21))
Reason INT (SIZE(1))
NumOfFailUpload (SIZE(1))

The following are the definitions for the fields:

•NumOfRecords—Designates the number of records. These records can all be the same type and can contain file uploaded information, or stat enable information, stat file trap information, or stat enable trap information.

•Reason—Specifies the following fields:

–1—Indicates the file is created or uploaded.

–2—Indicates a MAJOR warning for the file not being uploaded.

–3—Indicates a CRITICAL warning for the file not being uploaded.

PXM45

cwsStatsFileInfo

(continued)

 

–4—Indicates that the SNMP manager has downloaded the stats enable file.

–5—Indicates that the module, for example, Processor Module or Service Module, accepted the stats enable file without any error. The modules store the statistics information to enable or disable a dependent mechanism. This value cannot be set from the SNMP Manager.

–6—Indicates that the module did not accept the stats enable file due to some error. This value cannot be set from the SNMP manager.

•NumOfFailUpload—Speechifies the value is set to 0 except or for the cases when the Reason field is either 1 (created), 2, 3 (stat file trap). The parameter can have a value greater than 0.

Max-Access: read-write

Status: current

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products