Table Of Contents
WIC-1DSU-56K4 Documentation Roadmap
Product Information and Supported Hardware and Software
Regulatory Compliance and Safety Information
Hardware Installation
Interface Numbering
Software Configuration
WIC-1DSU-56K4 Documentation Roadmap
Updated 9/21/2004
This document provides links to resources for understanding, installing, and configuring the 4-wire 56/64-kbps channel service unit/data service unit (CSU/DSU) WAN interface card (WIC). Use this document in HTML format on Cisco.com.
Product:
WIC-1DSU-56K4 |
1-port 4-wire 56/64-kbps CSU/DSU WAN interface card |
Note 
This is a platform-independent document. To see which routers support this product, refer to the document in the following section.
Product Information and Supported Hardware and Software
•Understanding the 1-Port 4-Wire 56/64 Kpbs CSU/DSU WAN Interface Card (WIC-1DSU-56K4), tech note
Regulatory Compliance and Safety Information
•Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information
Hardware Installation
See the following chapters of the Cisco Interface Cards Hardware Installation Guide:
•Installing Cisco Interface Cards in Cisco Access Routers
•Connecting DSU/CSU WAN Interface Cards to a Network
Interface Numbering
•Overview in the hardware installation documentation for your router
Software Configuration
•Configuring Cisco Integrated Data Service Unit/Channel Service Unit (DSU/CSU) Modules and WAN Interface Cards, tech note
•"Configuring Serial Interfaces" chapter in the Cisco IOS Interface Configuration Guide, Release 12.2
•56K CSU Support for the Cisco Signaling Link Terminal, Cisco IOS Release 12.2(2)T feature module
•Cisco Signaling Link Terminal, Cisco IOS Release 12.1(1)T feature module
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Feedback