Lists each chapter of the Data Path Guide and provides a summary of the key topics covered, including controller configuration tasks, performance monitoring, connection verification procedures, and supported NCS 1010 topologies for colored, colorless, and hybrid optical solutions.
This document is organized into these chapters:
| Chapter |
Description |
|---|---|
| Configure Controllers | Describes the tasks to configure and view the parameters of the OTS, OTS-OCH, OSC, DFB, OCH, and OMS controller types. |
| Monitor Performance | Describes the setting and retrieval of PM counters for the OTS, OTS-OCH, OSC, DFB, OCH, and OMS controllers in flex-bin, 30-second, 15-minute, or 24-hour intervals. |
| Connection Verification | Checks the connection between the OLT-C line card and all the other passive modules to find broken links or loops. |
| Explains Smart Licensing concepts, entitlements, transport modes, registration, specific license reservation, verification commands, and license consumption behavior for connection verification, Nyquist channels, and OTDR scan data. |
|
| Explains host services used to check connectivity, resolve hostnames and IP addresses, transfer files, configure HTTP clients, and view or convert TCP dump. |
|
| Cisco NCS 1010 Topologies | Provides examples of a few NCS 1010 topologies for colored, colorless, and hybrid solutions. |
| Provides supported SNMP MIBs, OIDs, and OTS and OLC MIB support details for monitoring and managing Cisco NCS 1010 optical components. |