Explains how to configure and retrieve performance monitoring counters for optical controllers in supported intervals, set thresholds, and use performance data to detect and troubleshoot network issues.
Performance monitoring (PM) parameters are used by service providers to gather, store, set thresholds for, and report performance data for early detection of network issues. You can configure and retrieve PM counters for the various controllers in flex-bin, 30-second, 15-minute, or 24-hour intervals. These parameters simplify troubleshooting operations and enhance data that can be collected directly from the equipment.
Monitor performance
This section lists the performance monitoring (PM) parameters, their descriptions, precisions, and threshold ranges for OTS, OTS-OCH, OSC, DFB, OCH, and OMS controllers.
Photodiodes (PDs) refresh rate
This section explains how the refresh rate for photodiodes (PDs) in NCS 1010 line cards has been improved to enhance performance monitoring and measurement accuracy.
Configure and view PM parameters
This procedure explains how to configure performance monitoring (PM) parameters for network controllers and review current and historical PM data for operational insight.
7-day support for 15-Min PM bin
This section explains how extended 7-day support for 15-minute performance monitoring samples provides continuous network interface visibility and assessment