Full Cisco Trademarks with Software License
NCS 1010 Datapath Orchestration
Explains the purpose and organization of the NCS 1010 datapath guide and points to related system setup and optical application configuration information.
Configure Controllers
Describes how to configure and view OTS, OTS-OCH, OSC, DFB, OCH, and OMS controllers, including controller models, port mappings, AINS, ASE loading, headless mode, and optical channel monitoring.
CPSS upgrade and UDC traffic impact
Explains how CPSS version changes introduced in Cisco IOS XR Release 26.1.1 affect UDC traffic during software upgrades, downgrades, and Disaster Recovery operations, detailing the conditions and expected disruption periods.
Monitor Performance
Explains how to configure and retrieve performance monitoring counters for optical controllers in supported intervals, set thresholds, and use performance data to detect and troubleshoot network issues.
Connection Verification
Explains photodiode monitoring and connection verification tasks for line cards, breakout panels, Mux/Demux panels, side-to-side nodes, and OTS interfaces between OLT nodes.
Smart Licensing
Explains Smart Licensing concepts, entitlements, transport modes, registration, specific license reservation, verification commands, and license consumption behavior for connection verification, Nyquist channels, and OTDR scan data.
Host Services and Applications
Explains host services used to check connectivity, resolve hostnames and IP addresses, transfer files, configure HTTP clients, and view or convert TCP dump.
Cisco NCS 1010 Topologies
Provides topology examples for multidegree ROADM, colored, colorless, hybrid, point-to-point, and omnidirectional designs, including OLT-based and NCS2K-MF-4x4-COFS-based scenarios.
Configuring SNMP
Provides supported SNMP MIBs, OIDs, and OTS and OLC MIB support details for monitoring and managing Cisco NCS 1010 optical components.