Release Notes for Cisco NCS 1000 Series, IOS XR Release 26.1.1
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
Cisco NCS 1000 Series, IOS XR Release 26.1.1
Cisco NCS 1000 Series, IOS XR Release 26.1.1
Cisco IOS XR Release 26.1.1 is a new feature release for Cisco NCS 1000 Series
For more details on the Cisco IOS XR release model and associated support, see Software Lifecycle Support Statement - IOS XR.
This section provides a brief description of the new software features introduced in this release.
Table 1. New software features for Cisco NCS 1000 Series
| Product impact |
Feature |
Description |
| NCS 1014 Configuration |
||
| Software Reliability
|
Auto firmware support on trunk optics
|
NCS 1014 now supports automatic, parallel firmware upgrades for qualified trunk pluggable optics during system boot or software updates. To ensure integrity, the system locks line cards during the upgrade process. You can monitor upgrade status through the show hw-module fpd command, system logs, and alarms. This capability is compatible with all Cisco/Acacia trunk pluggables on these cards: ● NCS1K4-QXP-K9 ● NCS1K14-EDFA2 ● NCS1K14-2.4T-K9 ● NCS1K14-2.4T-A-K9 ● NCS1K14-2.4T-X-K9 This enhancement simplifies maintenance and increases reliability by automating firmware management across the network. |
| Software Reliability
|
Muxponder Slice and Muxponder card modes for NCS1K14-2.4T-A-K9 Line Card
|
The new NCS1K14-2.4T-A-K9 line card supports both Muxponder Slice and Muxponder card modes, similar to the 2.4T and 2.4TX transponder cards. It can handle 1.2T of data per trunk and supports client data rates of 100GE and 400GE, with the capability to increase up to 800G per client. |
| Software Reliability
|
OTNSec encryption support on the 2.4TA line card
|
The 2.4TA line card now supports AES256-based OTNSec encryption across all trunk rates on ODU-FLEX controllers using CIM8-C-K9 pluggable modules, significantly enhancing the security of optical transport networks. |
| Software Reliability
|
GCC0 support for NCS1K4-QXP-K9 card
|
General Communication Channel (GCC0) interface is supported for the DP04QSDD-HK9 pluggable on the NCS1K4-QXP-K9 card. GCC0 interface enables you to remotely manage, monitor, and operate the chassis and line cards, especially in environments without direct Data Communication Network (DCN) access. |
| NCS 1014 System Setup and Software Installation |
||
| Software reliability
|
The NCS 1014 system enables inventory support for these new line cards. ● NCS1K14-2.4T-A-K9 ● NCS1K14-2.4TAL-K9 |
|
| NCS 1010 and 1020 Datapath Configuration |
||
| Software Reliability
|
ASE loading can be disabled at both the channel and module levels to improve troubleshooting capabilities. The "ASE Loading Disabled" alarm has been introduced for this feature. Commands modified: The keyword ase-loading disable has been added to these commands: ● hw-module location location terminal-ampli ● hw-module location location terminal-ampli grid-mode flex channel id
|
|
| Software Reliability |
This feature provides a comprehensive support for the Ethernet Statistics on GE Interfaces through the Command Line Interface (CLI). It allows you to access real-timedata on various Ethernet statistics, providing network administrators with essential data for performance monitoring and troubleshooting. The CLI command introduced is: ● show controllers gigabitEthernet R/S/I/P stats The CLI command output modified to include packet counters information is: show interfaces GigabitEthernet R/S/I/P |
|
| NCS 1010 and 1020 Optical Applications |
||
| Software Reliability |
The span loss application now separately reports C band and Optical Supervisory Channel (OSC) span loss values. Additionally, you can configure deviation thresholds for span loss monitoring. If the difference between Rx OSC span loss and Rx signal span loss exceeds the set minimum or maximum thresholds, the Signal OSC Span Loss Diff Out of Range alarm is raised. This feature supports threshold configuration for both Raman and non-Raman nodes. This enhancement enables individual span loss measurements for the C band and OSC, instead of a combined total span loss measurement. Span loss payload configuration is specific to each controller within the optical-line-control configuration. Commands added: ● span-loss payload-osc-min-deviation ● span-loss payload-osc-max-deviation |
|
| Ease of use |
You can now set minimum and maximum threshold values to monitor deviations between measured Rx signal span loss and the baselined value. If the deviation exceeds your configured range, the system raises a SPAN-LOSS-BASELINE-DEVIATION-OUT-OF-RANGE alarm. Use the new commands max-baseline-deviation and min-baseline-deviation to configure these thresholds. |
|
| Software Reliability |
Bidirectional automatic OTDR scan
|
The OTDR autoscan is now conducted in both the Rx and Tx directions for all triggering events, ensuring no collision occurs during the bidirectional autoscan. This improvement allows autoscan operations to be executed in both directions, greatly enhancing fault detection and network diagnostics while preventing interference between scans. |
| Software Reliability |
The OTDR scan process now includes a negotiation step with a remote peer before starting the scan. This enhancement prevents simultaneous scans on the same fiber, avoiding measurement conflicts and ensuring accurate results. The force option allows a scan to start without negotiation, but it should be used cautiously to prevent simultaneous scans between the near-end and far-end nodes on the same fiber. Command modified: The keyword force has been added to the otdr-start controller ots R/S/I/P direction command. |
|
| NCS 1010 and 1020 Troubleshooting |
||
| Upgrade |
Improvements to Automatic Laser Shutdown enhance fiber safety by detecting line status based on Ethernet LOS, Ethernet FEFI, and LOS conditions of C-band signals. During a fiber cut, the system shuts down Tx signals for safety, and the OSC signal is reinstated for device communication after 3 seconds. These alarms have been introduced as part of this feature: · EGRESS-AMPLI-LASER-OFF · INGRESS-AMPLI-LASER-OFF · FEFI |
|
| NCS 1010 and 1020 System Setup and Software Installation |
||
| Software Reliability |
The Remote Console Connection enables you to connect to remote OLT and ILA nodes within the network using the OSC optical interface. This functionality allows you to access detailed information about the remote nodes through the near-end nodes by enabling the RCOM interface that is disabled by default. It provides essential access for gathering information and troubleshooting the remote nodes, even when intermediate nodes are in headless mode or lack a physical console connection. Establish connection to the remote nodes through their hostname or MAC address. The commands that enable remote connection are: ● remote-connect hostname <hostname> ● remote-connect mac <mac-address> ● show remote-connect neighbours |
|
| Cisco Optical Site Manager |
||
| Upgrade
|
The Card Configuration Wizard now lets you configure REGEN card mode for the NCS1K4-QXP-K9 card. |
|
| Upgrade
|
The Card Configuration Wizard now supports configuring these client data rates in the Muxponder slice card mode (MXP-SLICES-1K) for the NCSK14-2.4T-A-K9 card: ● 100GE ● 400GE |
|
| Ease of Use
|
Expert Mode Enhancements for Diagnostics
|
● ShowTech SupportShowTech Support and Fast DiagnosticsFast Diagnostics are now located in the new Expert ModeExpert Mode section, with ShowTech SupportShowTech Support renamed to Custom ShowTech.Custom ShowTech. ● You can now increase the default log collection timeout using the Watchdog TimeoutWatchdog Timeout setting. This lets you extend the default 30-minute limit, ensuring log collection completes without premature termination and preventing incomplete diagnostic data. |
| Ease of Setup
|
Support for MPB Raman Pump Amplifiers
|
You can now add and manage Raman pump amplifiers from Cisco Optical Site Manager using the SNMP southbound interface. Supported models include: ● MPB-2RU-MLD-1000-1426-1454-N2-C ● MPB-2RU-MLDS-1000-1400-1410-N2-C ● MPB-2RU-SRP-3000-1426-1454-N2-C. |
| Ease of Use
|
The COSM Setup tab now includes a Custom Download button, enabling you to download configuration details for a specific device. |
|
| Ease of Use
|
You can now enable the auto-refresh option in the Performance tab to automatically update performance monitoring data. After you manually retrieve PM data once, auto refresh ensures future updates reflect the latest current and historical information. |
|
| Ease of Use
|
You can now manage alert notifications from the Alarms tab by adjusting alarm severity levels and suppressing alarms as needed. |
|
This section provides a brief description of the new hardware features introduced in this release.
Table 2. New hardware for Cisco NCS 1000 Series
| Hardware |
Description |
| The NCS1K14-2.4T-A-K9 and NCS1K14-2.4TAL-K9 line cards are introduced as 2.4T DWDM coherent optics transponder and muxponder solutions for the NCS 1014 chassis. These line cards carry 100GE, 400GE and 800GE client traffic and enable networks to use C- and L-band frequencies for wider coverage. |
This table lists the open issues in this specific software release.
Note: This software release may contain open bugs first identified in other releases. To see additional information, click the bug ID to access the Cisco Bug Search Tool (BST).
Table 3. Open issues for Cisco NCS 1014
| Bug ID |
Description |
| RF observed on split port after power cycle or data path creation (noted on 400G/800G client) |
|
| During SW upgrade sometimes LC is booting with Golden image |
NCS 1010
Table 4. Open issues for Cisco NCS 1010
| Bug ID |
Description |
||
| L-Band APC required approximately 40 minutes to converge following an LC cold reload on OLT-L |
|||
|
|||
| OTDR auto scan did not initiate after fiber restoration |
NCS 1020
Table 5. Open issues for Cisco NCS 1020
| Bug ID |
Description |
| OTDR scan status differs between baseline and current CLI; system not recovered after ALC re-trigger |
Cisco Optical Site Manager
Table 6. Open issues for Cisco Optical Site Manager
| Bug ID |
Description |
| COSM 2511-NCS1010: Degree creation does not work after existing OLT card deletion, plug out and new card inserted and discovered (same/different PID) |
|
| [1000-COSM]- Fiber-cut repair is not functioning or enabled on the ILA (Degree 2) setup |
|
| SSH Connectivity Issue Due to Incorrect SSH Port Configuration - Diagnostics, Backup, and Software Download Impacted |
|
| Setting out-octets/in-good/out-good TCAs from XR causes COSM device to go out of sync |
|
| [COSM-WEBUI] Hardening: IPCs getting overlapped in IPC creation window when multiple IPCs are added at same time |
This section provides information about the release packages associated with NCS 1000 series.
Table 7. Software packages for NCS 1000 Series
NCS 1010
| Package |
Filename |
Description |
| Composite package |
||
| Cisco IOS XR Core Bundle + Manageability Package |
ncs1010-x64-26.1.1.iso |
IOS Contains required core packages, including operating system, Admin, Base, Forwarding, SNMP Agent, FPD, and Alarm Correlation and Netconf-yang, Telemetry, Extensible Markup Language (XML) Parser, HTTP server packages. IOS XR Base Image |
NCS 1014
| Package |
Filename |
Description |
| Individually installable packages |
||
| Cisco IOS XR Telnet Packages |
xr-telnet-26.1.1v1.0.0-1.x86_64.rpm xr-telnet-ncs1014-26.1.1.v1.0.0-1.x86_64.rpm |
Install these packages to support Telnet. |
| Cisco IOS XR Security Package |
xr-k9sec-pid-eb216ea0977bb9c7-26.1.1.v1.0.0-1.x86_64.rpm
|
Support for Encryption, Decryption, IP Security (IPsec), Secure Socket Layer (SSL), and Public-key infrastructure (PKI). |
| Cisco IOS XR Cisco Discovery Protocol (CDP) Packages |
xr-cdp-26.1.1v1.0.0-1.x86_64.rpm xr-cdp-ncs1014-26.1.1v1.0.0-1.x86_64.rpm xr-cdp-f544c7c7d37890ec-26.1.1v1.0.0-1.x86_64.rpm xr-telnet-f544c7c7d37890ec-26.1.1v1.0.0-1.x86_64.rpm |
Install these packages to support CDP. |
NCS 1004
| Package |
Filename |
Description |
| Composite package |
||
| Cisco IOS XR Core Bundle + Manageability Package |
NCS1004-iosxr-px-k9-26.1.1.tar |
Contains required core packages, including operating system, Admin, Base, Forwarding, SNMP Agent, FPD, and Alarm Correlation and Netconf-yang, Telemetry, Extensible Markup Language (XML) Parser, HTTP server packages |
| Individually installable packages |
||
| Cisco IOS XR Security Package |
ncs1004-k9sec-1.0.0.0-r2611.x86_64.rpm |
Support for Encryption, Decryption, IP Security (IPsec), Secure Socket Layer (SSL), and Public-key infrastructure (PKI). |
| Cisco IOS XR OTN-XP DP Package |
ncs1004-sysadmin-otn-xp-dp -26.1.1-r2611.x86_64.rpm (part of ncs1004-iosxr-px-k9-26.1.1.tar) |
Install this data path FPD packages on the OTN-XP card. This package is mandatory for datapath bring up. |
Cisco Optical Site Manager
| Package |
Filename |
| Composite package |
|
| Cisco IOS XR COSM Package |
|
Determine software version
NCS 1004
Log into the node and enter the show version command.
RP/0/RP0/CPU0:ios#show version
Cisco IOS XR Software, Version 26.1.1
Copyright (c) 2013-2026 by Cisco Systems, Inc.
Build Information:
Built By : swtools
Built On : Wed Feb 25 21:33:30 PST 2026
Built Host : iox-lnx-107
Workspace : /auto/srcarchive12/prod/26.1.1/ncs1004/ws
Version : 26.1.1
Location : /opt/cisco/XR/packages/
Label : 26.1.1
cisco NCS-1004 () processor
System uptime is 7 minutes
NCS 1010
RP/0/RP0/CPU0:ios#show version
Thu Feb 26 21:54:59.977 IST
Cisco IOS XR Software, Version 26.1.1 LNT
Copyright (c) 2013-2026 by Cisco Systems, Inc.
Build Information:
Built By : cisco
Built On : Thu Feb 26 03:41:18 UTC 2026
Build Host : iox-lnx-108
Workspace : /auto/srcarchive12/prod/26.1.1/ncs1010/ws/
Version : 26.1.1
Label : 26.1.1
cisco NCS1010 (C3758 @ 2.20GHz)
cisco NCS1010-SA (C3758 @ 2.20GHz) processor with 32GB of memory
CVT-ILA-1 uptime is 7 minutes
NCS 1010 - Chassis
NCS 1020
RP/0/RP0/CPU0:ios#show version
Thu Feb 26 21:53:50.932 IST
Cisco IOS XR Software, Version 26.1.1 LNT
Copyright (c) 2013-2026 by Cisco Systems, Inc.
Build Information:
Built By : cisco
Built On : Thu Feb 26 03:41:18 UTC 2026
Build Host : iox-lnx-108
Workspace : /auto/srcarchive12/prod/26.1.1/ncs1010/ws/
Version : 26.1.1
Label : 26.1.1
cisco NCS1010 (C3758R @ 2.40GHz)
cisco NCS1020-SA (C3758R @ 2.40GHz) processor with 32GB of memory
CVT-OLT-1 uptime is 6 minutes
NCS 1020 Chassis
NCS 1014
RP/0/RP0/CPU0:ios#show version
Fri Feb 27 14:13:51.176 IST
Cisco IOS XR Software, Version 26.1.1 LNT
Copyright (c) 2013-2026 by Cisco Systems, Inc.
Build Information:
Built By : cisco
Built On : Thu Feb 26 03:41:18 UTC 2026
Build Host : iox-lnx-108
Workspace : /auto/srcarchive12/prod/26.1.1/ncs1010/ws/
Version : 26.1.1
Label : 26.1.1
cisco NCS1010 (C3758R @ 2.40GHz)
cisco NCS1014 (C3758R @ 2.40GHz) processor with 32GB of memory
sit_kep1 uptime is 48 minutes
NCS 1014 - Chassis
Determine firmware version
Use the show hw-module fpd command in EXEC mode to view the hardware components with their current FPD version and status. The status of the hardware must be CURRENT; The Running and Programmed version must be the same.
Log into the node and enter the show hw-module fpd command.
NCS 1004
RP/0/RP0/CPU0:ios#show hw-module fpd
Fri Feb 27 15:44:37.873 IST
Auto-upgrade:Enabled
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd
-----------------------------------------------------------------------------------------
0/0 NCS1K4-1.2T-K9 3.0 LC_CPU_MOD_FW CURRENT 261.100 261.100
0/0 NCS1K4-1.2T-K9 3.0 LC_OPT_MOD_FW CURRENT 1.38 1.38
0/1 NCS1K4-1.2T-K9 2.0 LC_CPU_MOD_FW CURRENT 261.100 261.100
0/1 NCS1K4-1.2T-K9 1.0 LC_OPT_MOD_FW CURRENT 1.38 1.38
0/2 NCS1K4-1.2T-K9 2.0 LC_CPU_MOD_FW CURRENT 261.100 261.100
0/2 NCS1K4-1.2T-K9 1.0 LC_OPT_MOD_FW CURRENT 1.38 1.38
0/3 NCS1K4-1.2T-K9 3.0 LC_CPU_MOD_FW CURRENT 261.100 261.100
0/3 NCS1K4-1.2T-K9 21.0 LC_OPT_MOD_FW CURRENT 1.38 1.38
0/RP0 NCS1K4-CNTLR-K9 8.0 CSB_IMG S CURRENT 0.200 0.200
0/RP0 NCS1K4-CNTLR-K9 8.0 TAM_FW CURRENT 36.08 36.08
0/RP0 NCS1K4-CNTLR-K9 1.14 BIOS S CURRENT 7.30 7.30
0/RP0 NCS1K4-CNTLR-K9 5.4 BP_SSD CURRENT 75.00 75.00
0/RP0 NCS1K4-CNTLR-K9 8.0 CPU_FPGA CURRENT 1.14 1.14
0/RP0 NCS1K4-CNTLR-K9 5.5 CPU_SSD CURRENT 1.00 1.00
0/RP0 NCS1K4-CNTLR-K9 3.18 POWMAN_CFG CURRENT 3.40 3.40
0/PM0 NCS1K4-AC-PSU 0.1 PO-PriMCU NEED UPGD 2.68 2.68
0/SC0 NCS1004 2.0 BP_FPGA CURRENT 1.25 1.25
0/SC0 NCS1004 2.0 XGE_FLASH CURRENT 18.04 18.04
NCS 1010
RP/0/RP0/CPU0:ios#show hw-module fpd
RP/0/RP0/CPU0:CVT-ILA-1#sh hw-module fpd
Thu Feb 26 21:55:07.305 IST
Auto-upgrade:Enabled,PM excluded
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 NCS1010-CNTLR-K9 1.11 ADMConfig CURRENT 3.40 3.40 NOT REQ
0/RP0/CPU0 NCS1010-CNTLR-K9 1.11 BIOS S CURRENT 6.10 6.10 0/RP0
0/RP0/CPU0 NCS1010-CNTLR-K9 1.11 BIOS-Golden BS CURRENT 4.10 0/RP0
0/RP0/CPU0 NCS1010-CNTLR-K9 1.11 CpuFpga S CURRENT 1.13 1.13 0/RP0
0/RP0/CPU0 NCS1010-CNTLR-K9 1.11 CpuFpgaGolden BS CURRENT 1.01 0/RP0
0/RP0/CPU0 NCS1010-CNTLR-K9 1.11 SsdMicron5300 S CURRENT 0.01 0.01 0/RP0
0/RP0/CPU0 NCS1010-CNTLR-K9 1.11 TamFw S CURRENT 6.13 6.13 0/RP0
0/RP0/CPU0 NCS1010-CNTLR-K9 1.11 TamFwGolden BS CURRENT 6.11 0/RP0
0/PM0 NCS1010-AC-PSU 1.0 AP-PriMCU CURRENT 1.03 1.03 NOT REQ
0/PM0 NCS1010-AC-PSU 1.0 AP-SecMCU CURRENT 2.01 2.01 NOT REQ
0/PM1 NCS1010-AC-PSU 1.0 AP-PriMCU CURRENT 1.03 1.03 NOT REQ
0/PM1 NCS1010-AC-PSU 1.0 AP-SecMCU CURRENT 2.01 2.01 NOT REQ
0/0/NXR0 NCS1K-ILA-C 1.0 ILA S CURRENT 3.44 3.44 NOT REQ
0/Rack NCS1010-SA 2.1 EITU-ADMConfig CURRENT 2.10 2.10 NOT REQ
0/Rack NCS1010-SA 2.1 IoFpga S CURRENT 1.27 1.27 NOT REQ
0/Rack NCS1010-SA 2.1 IoFpgaGolden BS CURRENT 1.01 NOT REQ
0/Rack NCS1010-SA 2.1 SsdMicron5300 S CURRENT 0.01 0.01 0/Rack
NCS 1020
RP/0/RP0/CPU0:ios#show hw-module fpd
Thu Feb 26 21:53:56.528 IST
Auto-upgrade:Enabled,PM excluded
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 NCS1010-CTR2-B-K9 1.0 ADMCONFIG CURRENT 1.00 1.00 NOT REQ
0/RP0/CPU0 NCS1010-CTR2-B-K9 1.0 BIOS S CURRENT 6.10 6.10 0/RP0
0/RP0/CPU0 NCS1010-CTR2-B-K9 1.0 BIOS-Golden BS CURRENT 5.20 0/RP0
0/RP0/CPU0 NCS1010-CTR2-B-K9 1.0 CpuFpga S CURRENT 1.12 1.12 0/RP0
0/RP0/CPU0 NCS1010-CTR2-B-K9 1.0 CpuFpgaGolden BS CURRENT 1.06 0/RP0
0/RP0/CPU0 NCS1010-CTR2-B-K9 1.0 SsdMicron5300 S CURRENT 0.01 0.01 0/RP0
0/RP0/CPU0 NCS1010-CTR2-B-K9 1.0 TamFw S CURRENT 9.07 9.07 0/RP0
0/RP0/CPU0 NCS1010-CTR2-B-K9 1.0 TamFwGolden BS CURRENT 9.07 0/RP0
0/PM0 NCS1K4-AC-PSU-2 1.0 PO-PriMCU CURRENT 1.03 1.03 NOT REQ
0/PM0 NCS1K4-AC-PSU-2 1.0 PO-SecMCU CURRENT 1.05 1.05 NOT REQ
0/PM1 NCS1K4-AC-PSU-2 1.0 PO-PriMCU CURRENT 1.03 1.03 NOT REQ
0/PM1 NCS1K4-AC-PSU-2 1.0 PO-SecMCU CURRENT 1.05 1.05 NOT REQ
0/0/NXR0 NCS1K-E-OLT-C 1.0 OLT S CURRENT 3.44 3.44 NOT REQ
0/2/NXR0 NCS1K14-CCMD-16-C 1.0 CpuModFw S CURRENT 261.100 261.100 NOT REQ
0/2/NXR0 NCS1K14-CCMD-16-C 1.0 OptModFw S CURRENT 20.04 20.04 NOT REQ
0/3/NXR0 NCS1K14-CCMD-16-C 1.0 CpuModFw S CURRENT 261.100 261.100 NOT REQ
0/3/NXR0 NCS1K14-CCMD-16-C 1.0 OptModFw S CURRENT 20.04 20.04 NOT REQ
0/4/NXR0 NCS1K14-CCMD-16-C 1.0 CpuModFw S CURRENT 261.100 261.100 NOT REQ
0/4/NXR0 NCS1K14-CCMD-16-C 1.0 OptModFw S CURRENT 20.04 20.04 NOT REQ
0/Rack NCS1020-SA 1.0 ADMCONFIG CURRENT 1.00 1.00 NOT REQ
0/Rack NCS1020-SA 1.0 IoFpgaLow S CURRENT 1.12 1.12 NOT REQ
0/Rack NCS1020-SA 1.0 IoFpgaLowGolden BS CURRENT 1.08 NOT REQ
0/Rack NCS1020-SA 1.0 IoFpgaUp S CURRENT 1.10 1.10 NOT REQ
0/Rack NCS1020-SA 1.0 IoFpgaUpGolden BS CURRENT 1.08 NOT REQ
0/Rack NCS1020-SA 1.0 SsdIntelSC2KB S CURRENT 1.30 1.30 0/Rack
NCS 1014
RP/0/RP0/CPU0:ios#show hw-module fpd
Fri Feb 27 14:13:56.703 IST
Auto-upgrade:Enabled,PM excluded
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 NCS1K14-CTLR-B-K9 0.2 ADM-DB CURRENT 2.10 2.10 NOT REQ
0/RP0/CPU0 NCS1K14-CTLR-B-K9 0.2 ADM-MB CURRENT 2.30 2.30 NOT REQ
0/RP0/CPU0 NCS1K14-CTLR-B-K9 0.2 BIOS S CURRENT 6.10 6.10 0/RP0
0/RP0/CPU0 NCS1K14-CTLR-B-K9 0.2 BIOS-Golden BS CURRENT 1.72 0/RP0
0/RP0/CPU0 NCS1K14-CTLR-B-K9 0.2 CpuFpga S CURRENT 1.17 1.17 0/RP0
0/RP0/CPU0 NCS1K14-CTLR-B-K9 0.2 CpuFpgaGolden BS CURRENT 0.27 0/RP0
0/RP0/CPU0 NCS1K14-CTLR-B-K9 0.2 SsdMicron5300 S CURRENT 0.01 0.01 0/RP0
0/RP0/CPU0 NCS1K14-CTLR-B-K9 0.2 TamFw S CURRENT 9.04 9.04 0/RP0
0/RP0/CPU0 NCS1K14-CTLR-B-K9 0.2 TamFwGolden BS CURRENT 9.04 0/RP0
0/PM0 NCS1K4-AC-PSU-2 1.1 PO-PriMCU CURRENT 1.03 1.03 NOT REQ
0/PM0 NCS1K4-AC-PSU-2 1.1 PO-SecMCU CURRENT 1.05 1.05 NOT REQ
0/PM1 NCS1K4-AC-PSU-2 0.1 PO-PriMCU CURRENT 1.03 1.03 NOT REQ
0/PM1 NCS1K4-AC-PSU-2 0.1 PO-SecMCU CURRENT 1.05 1.05 NOT REQ
0/0/NXR0 NCS1K14-2.4T-K9 0.1 CpuModFw S CURRENT 261.100 261.100 NOT REQ
0/0/NXR0 NCS1K14-2.4T-K9 0.0 OpticsFw_Port_0 S CURRENT 80.14014 80.14014 NOT REQ
0/0/NXR0 NCS1K14-2.4T-K9 0.0 OpticsFw_Port_7 S CURRENT 80.14014 80.14014 NOT REQ
0/1/NXR0 NCS1K14-2.4T-X-K9 1.0 CpuModFw S CURRENT 261.100 261.100 NOT REQ
0/1/NXR0 NCS1K14-2.4T-X-K9 0.0 OpticsFw_Port_0 S CURRENT 80.14014 80.14014 NOT REQ
0/2/NXR0 NCS1K14-2.4T-K9 0.1 CpuModFw S CURRENT 261.100 261.100 NOT REQ
0/2/NXR0 NCS1K14-2.4T-K9 0.0 OpticsFw_Port_0 S CURRENT 80.14014 80.14014 NOT REQ
0/3/NXR0 NCS1K14-2.4T-X-K9 1.0 CpuModFw S CURRENT 261.100 261.100 NOT REQ
0/3/NXR0 NCS1K14-2.4T-X-K9 0.0 OpticsFw_Port_0 S CURRENT 80.14014 80.14014 NOT REQ
0/3/NXR0 NCS1K14-2.4T-X-K9 0.0 OpticsFw_Port_7 S CURRENT 80.14014 80.14014 NOT REQ
0/0/NXR0 NCS1K14-EDFA2 0.1 CpuModFw S CURRENT 261.100 261.100 NOT REQ
0/0/NXR0 NCS1K14-EDFA2 0.0 OpticsFw_Port_6 S CURRENT 1.02 1.02 NOT REQ
0/Rack NCS1014 0.1 ADM-CHASSIS CURRENT 0.21 0.21 NOT REQ
0/Rack NCS1014 0.1 IoFpga S CURRENT 2.26 2.26 NOT REQ
0/Rack NCS1014 0.1 IoFpgaGolden BS CURRENT 1.05 NOT REQ
0/Rack NCS1014 0.1 SsdIntelSC2KB S CURRENT 1.30 1.30 0/Rack
RP/0/RP0/CPU0:ios#
These links provide access to related documents and resources associated with this release:
● For the supported upgrade and downgrade paths:
◦ NCS 1004 - Software Upgrade and Downgrade MatrixSoftware Upgrade and Downgrade Matrix
◦ NCS 1010 - Software Upgrade and Downgrade MatrixSoftware Upgrade and Downgrade Matrix
◦ NCS 1014 - Software Upgrade and Downgrade MatrixSoftware Upgrade and Downgrade Matrix
● For the complete list of documentation for the release, see Cisco Network Convergence System 1000 SeriesCisco Network Convergence System 1000 Series.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2026 Cisco Systems, Inc. All rights reserved.