T01F3nnn - FTP3 Messages

Table Of Contents

T01F3nnn - FTP3 Messages

T01F3nnn

T01F3000I

T01F3001E

T01F3002E

T01F3003E

T01F3004E

T01F3005E

T01F3006E

T01F3007E

T01F3008E

T01F3009E

T01F3010E

T01F3011E

T01F3012E

T01F3013E

T01F3014E

T01F3015E

T01F3016E

T01F3017E

T01F3018E

T01F3021E

T01F3022E

T01F3023E

T01F3024I

T01F3026I

T01F3027I

T01F3028I

T01F3029I

T01F3030E

T01F3031I

T01F3032E

T01F3034E

T01F3035E

T01F3036I

T01F3037I

T01F3039E

T01F3040E

T01F3041E

T01F3042E

T01F3043E

T01F3045E

T01F3046E

T01F3047E

T01F3049E

T01F3050E

T01F3051E

T01F3052E

T01F3054E

T01F3055E

T01F3056E

T01F3057I

T01F3059E

T01F3303E

T01F3310I

T01F3502E

T01F3503E

T01F3504E

T01F3505E

T01F3506E

T01F3507E

T01F3508E

T01F3602E

T01F3603E

T01F3604E

T01F3605E

T01F3606E

T01F3616E

T01F3nnn - FTP3 Messages

---

This chapter describes the messages issued by the FTP3 program. These include messages T01F3001 through T01F3999.

T01F3nnn

T01F3000I

FTP Cisco IOS for S/390 version

Explanation    This message is the first displayed after the user logon is processed. It indicates that Cisco IOS for S/390 FTP is running.

T01F3001E

DD:ddname file open request failed.

Explanation    Client FTP3 could not open the specified ddname indicated in the message text.

Recommended Action    Allocate the DD in TSO or specify the DD in the batch JCL stream.

T01F3002E

ACF2 is installed but is not active.

Explanation    ACF2 is defined as a subsystem in MVS, but ACF2 is not active or might not be completely initialized.

Recommended Action    Contact your system administrator to start ACF2.

T01F3003E

TOP SECRET is installed, but is not active.

Explanation    CA-TOP SECRET is defined to MVS, but is not active or might not be completely initialized.

Recommended Action    Ask your system administrator to start CA-TOP SECRET.

T01F3004E

System security is not active.

Explanation    Client FTP3 is expecting to find ACF2, RACF or CA-TOP SECRET. None of these security systems is found active in the system. Without an active security system Client FTP3 is not able to obtain user attributes, such as encrypted passwords for logging in to the local host.

Recommended Action    Ask your system administrator to start the system's security function.

T01F3005E

FTP is not authorized to access user information.

Explanation    Client FTP3 does not have access to user information through system security.

Recommended Action    Contact your system administrator to verify that Client FTP3 is implemented as an authorized TSO command.

T01F3006E

RACROUTE REQUEST=EXTRACT abend; error code: 00wwxxyy

Explanation    The GetUserInfo function failed when issuing RACROUTE REQUEST=EXTRACT system call. The error code is of the following form:

ww	The RACROUTE reason code.
xx	The RACROUTE return code.
yy	The SAF return code.

The GetUserinfo routine cannot perform encrypted password extraction. If the command is running interactively, the user is prompted for a password

Recommended Action    Contact your local external security support personnel (RACF, CA-ACF2, CA-TOP SECRET) and provide all relevant information. Refer to the IBM document RACF Macro Reference for information regarding the above return and reason codes.

The error code is the same as the RACROUTE return code and reason code.

T01F3007E

Client FTP is not able to establish its error recovery environment during 

    user validation.

Explanation    The GetUserinfo function failed to establish ESTAE, or set up its error recovery environment.

Recommended Action    Gather your MVS and TSO release numbers and maintenance levels, and contact Customer Support.

T01F3008E

RACROUTE ESTAE recursion or ESTAE error.

Explanation    The GetUserinfo function failed to establish ESTAE, or set up a recovery environment.

Recommended Action    Report this problem to your local MVS and security support personnel.

T01F3009E

RACROUTE REQUEST=EXTRACT failed; error code: 00wwxxyy

Explanation    The GetUserinfo function failed issuing the RACROUTE REQUEST=EXTRACT system call. The error code is of the following form:

ww	The RACROUTE reason code.
xx	The RACROUTE return code.
yy	The SAF return code.

The GetUserinfo routine cannot perform encrypted password extraction. If the command is running interactively, the user is prompted for a password.

Recommended Action    Contact your local external security support personnel (RACF, CA-ACF2, CA-TOP SECRET) and provide all relevant information. Refer to the IBM document RACF Macro Reference for information regarding the above return and reason codes.

T01F3010E

Not able to open connection to the local host; error code: xx err_msg

Explanation    Possible logic error or insufficient buffer space. A socket call failed returning error code: xx err_msg

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3011E

Not able to connect to the FTP server; error code: xx err_msg

Explanation    The Client FTP3 connect function failed so no connection was established to the remote host.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3012E

Call to mvsselect() failed; error code: xx err_msg

Explanation    Possible logic error. Client FTP3 is waiting for a response which has not arrived.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3013E

Attempt to connect to server failed - Interrupted by user.

Explanation    PA1 was pressed during local host connect.

Recommended Action    Retry the connection.

T01F3014E

Attempt to connect to server timed out.

Explanation    There was no response from the local server within MYOPENTIME.

Recommended Action    Verify that MYOPENTIME is set to a non-zero value in the FTP.DATA file. Check T01LOG under Cisco IOS for S/390 for relevant messages.

T01F3015E

Local Host OPEN failed with return code: rrrrr. 

Explanation    The 220 reply was not received from the local server.

Recommended Action    Check T01LOG under the TCP started task for relevant messages.

T01F3016E

Unable to log in to the local host: error code: xx err_msg

Explanation    A C/socket API error prevented Client FTP3 from processing the user logon.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3017E

Unable to log in to the local host FTP Return Code = rrrrr.

Explanation    The expected reply code was not received from the local server in response to the user logon request.

Recommended Action    Verify that the user ID and password are valid to your security system.

T01F3018E

TCPIP subsystem is not currently available.

Explanation    The TCP transport provider specified with the TCPJOBNAME parameter is not currently available.

Recommended Action    Specify a value for TCPJOBNAME that corresponds to a currently available TCP subsystem.

T01F3021E

Client FTP is not able to get the local host network address; 

    error code: xx err_msg 

Explanation    The ioctl SIOCGIFCONF failed. Client FTP3 is not able to obtain local host ioconfig information.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3022E

Client FTP is not able to get the local host network address; 

    error code: xx err_msg 

Explanation    The m_alloc function call failed. Client FTP3 is not able to allocate storage for ioconfig or for the second ioctl call.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3023E

Client FTP is not able to get the local host network address; 

    error code: xx err_msg 

Explanation    The ioctl function is not able to get the network address from the ioconfig.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3024I

Command terminated at user's request.

Explanation    The PA1 key or ATTENTION key was pressed to terminate the previous request or command.

T01F3026I

FTP statement rejected by the local FTP server: Statement 

Explanation    An incorrect FTP.DATA statement was rejected by the FTP server.

Recommended Action    Correct the statement in the FTP.DATA file and resubmit the request. If you need more information about the statement, rerun the Client FTP3 request with the trace option.

T01F3027I

The file filename is not allocated.

Explanation    Client FTP3 is not able to allocate the specified file.

Recommended Action    Verify that the specified file exists and resubmit the Client FTP3 request.

T01F3028I

An incorrect statement is detected in the TCPIP.DATA file: Statement 

Explanation    An incorrect statement was found in the TCPIP.DATA file.

Recommended Action    Correct the statement and resubmit the Client FTP3 command.

T01F3029I

An incorrect statement is detected in the FTP.DATA file: Statement 

Explanation    An incorrect statement was found in the FTP.DATA file.

Recommended Action    Correct the statement and resubmit the Client FTP3 command.

T01F3030E

Client FTP is not able to open filename.

Explanation    Client FTP3 failed to open the specified file.

Recommended Action    Verify the data set attributes of the specified file.

T01F3031I

An FTP.DATA file statement is not allowed as entered: Statement 

Explanation    An incorrect statement was detected in the FTP.DATA file.

Recommended Action    Correct the statement and re-enter the Client FTP3 command.

T01F3032E

Command cmnd is not supported.

Explanation    The user has entered an unsupported command.

Recommended Action    Enter HELP for a list of commands supported by Client FTP3.

T01F3034E

cmnd command unknown

Explanation    User has entered a command not recognized by Client FTP.

Recommended Action    Correct the entry and resubmit the Client FTP3 request. Enter HELP for a list of commands supported by Client FTP3.

T01F3035E

Client FTP was not able to process the USER command; 

    error number: xx err_msg.

Explanation    Client FTP3 is not able to log the user into the remote host.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3036I

Call to mvsselect() socket function failed; error code: xx err_msg

Explanation    Possible logic error. Client FTP3 is waiting for a response which has not arrived.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3037I

Remote host closed control connection unexpectedly.

Explanation    The remote host FTP server has closed the control connection after data transfer is completed. This might indicate that the control connection timed out or the remote host has crashed.

Recommended Action    Retry; if the problem persists, contact your Cisco IOS for S/390 administrator.

T01F3039E

No response from the remote FTP server in nn seconds.

Explanation    The remote FTP server is not responding after a timeout.

Recommended Action    Retry; if the problem persists, contact your network administrator. If the error is not caused by implementation restrictions, contact Customer Support.

T01F3040E

The remote host is not connected.

Explanation    A Client FTP3 CLOSE command was issued, but the remote host is not connected and, therefore, not able to respond.

Recommended Action    Connect to the remote host by issuing an open command or re-enter the Client FTP3 command.

T01F3041E

No HELP information found.

Explanation    There is no help information for the specified command.

Recommended Action    Enter HELP for a list of commands supported by Client FTP3.

T01F3042E

Client FTP is not able to open a connection to the remote host; 

    error code: xx err_msg 

Explanation    A socket function failed. Client FTP3 is not able to open a data connection.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3043E

Client FTP is not able to open a connection to the remote host; 

    error code: xx err_msg 

Explanation    Possible logic error. A BIND function failed trying to open a data connection.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3045E

FTP listen() failed; error code: xx err_msg 

Explanation    The listen function call failed in NLST services; error code: xx err_msg

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3046E

Unable to connect to remote host in nn seconds.

Explanation    Connection to remote host FTP server data port timed out.

Recommended Action    Contact your network administrator and restart Client FTP3.

If the error is not caused by implementation restrictions, contact Customer Support.

T01F3047E

accept() failed; cannot create remote data socket; error code: xx err_msg

Explanation    Possible logic error. The socket accept() function failed. Client FTP3 is not able to open the data connection socket; error code: xx err_msg

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3049E

Already connected to host host_name.

Explanation    A session with the specified remote host was already active when an open command was entered.

Recommended Action    Continue operation or close the current connected remote host and open another remote host.

T01F3050E

Request to open a connection to remote host host_name failed.

Explanation    Possible user error. Client FTP3 failed to resolve the host name.

Recommended Action    Verify that the correct host name or domain name server specification was used. Also verify that the domain name resolver is functioning properly.

T01F3051E

Client FTP was not able to send the PASS command to the remote host; 

    error code: xx err_msg 

Explanation    The PASS command failed.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3052E

Client FTP failed to receive a reply to the PASS command;  
    error code: xx err_msg 

Explanation    Client FTP3 is unable to receive a response from the remote host while processing the PASS command.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3054E

Transmission mode does not allow restart.

Explanation    Data transfer restart is allowed only if the data transfer mode is block mode.

Recommended Action    Use the mode B command to switch the data transfer mode before the restart.

T01F3055E

Unable to allocate CHKPOINT data set.

Explanation    Client FTP3 is not able to allocate the userid.FTP.CHKPOINT file.

Recommended Action    Contact your system administrator for help.

T01F3056E

Unable to open CHKPOINT data set.

Explanation    Client FTP3 is not able to open the userid.FTP.CHKPOINT file.

Recommended Action    Contact your system administrator for help.

T01F3057I

TSO returned : return code xx.

Explanation    The TSO command submitted to TSO returned xx. If xx was returned, a TSO error message will describe the error.

If the user entered an unauthorized TSO command the TSO service routine will reject the command with return code of 20 and reason code of 60 because Cisco IOS for S/390 Client FTP3 is running as an authorized TSO command and TSO/E IKJEFTSR specifically allows you to invoke authorized functions from an unauthorized application program. It maintains system security by running an invoked authorized function in its own isolated environment. However, to maintain system security, an authorized application program can use the TSO/E service facility to invoke only authorized programs or commands, or CLISTs consisting of only authorized programs and commands.

T01F3059E

recv() error code: xx err_msg; 

Explanation    Socket receiver error; error code listed in T01F3001E.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3303E

TSO is required when executing a TSO command.

Explanation    The user attempted to issue a TSO command when not running under TSO.

Recommended Action    Retry the command under TSO.

T01F3310I

FTP Return Code = rrrrr

Explanation    The Client FTP3 command failed with return code rrrrr.

T01F3502E

Too many positional parameters entered.

Explanation    Only host and remote port number can be specified as command line arguments.

Recommended Action    Reissue the FTP command specifying the appropriate command line arguments.

T01F3503E

No Timeout value provided.

Explanation    The TIMEOUT keyword was specified but no timeout value was provided.

Recommended Action    Specify a value for TIMEOUT.

T01F3504E

No TCP Jobname provided

Explanation    The TCPJOBNAME keyword was specified but no value was provided.

Recommended Action    Specify a value for TCPJOBNAME.

T01F3505E

Incorrect EXIT parameter in the FTP command: EXIT=nn

Explanation    The EXIT keyword was provided but the value was invalid.

Recommended Action    Specify a correct value for EXIT.

T01F3506E

No Translate Table Dataset name provided.

Explanation    The TRANSLATE keyword was specified but no table name was provided.

Recommended Action    Specify a valid translate table name.

T01F3507E

No subsystem ID provided.

Explanation    The SSID keyword was specified but no value was provided.

Recommended Action    Specify a value for SSID.

T01F3508E

Unknown parameter: cccccccc

Explanation    A keyword was specified that is not valid.

Recommended Action    Remove the invalid keyword from the command line.

T01F3602E

Call to mvsselect() failed; error code: xx err_msg

Explanation    Possible logic error. Client FTP3 is waiting for a response.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3603E

Attempt to establish data connection failed - Interrupted by user.

Explanation    The PA1 or ATTENTION key was pressed while waiting for data connection to open.

Recommended Action    Retry the connection.

T01F3604E

Attempt to establish data connection timed out.

Explanation    There was no response to the connect request in dconntime.

Recommended Action    Verify that dconntime is set to a non-zero value in the FTP.DATA file. Check the Cisco IOS for S/390 T01LOG for relevant messages.

T01F3605E

Not able to establish data connection: error code: xx err_msg

Explanation    The attempt to open the data connection failed.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3606E

Not able to establish data connection: error code: xx err_msg

Explanation    The connect call failed for the data connection.

Recommended Action    Use the error message provided (err_msg) to determine the cause of the failure.

T01F3616E

Command command requires a remote host connection: use OPEN first.

Explanation    The user attempted to invoke a command that requires remote host without issuing OPEN first.

Recommended Action    Open the remote host and retry the command.