Introduction

Available Languages

Download Options

  • PDF     (67.3 KB)
    View with Adobe Reader on a variety of devices
Updated:October 1, 2007

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

Table Of Contents

Introduction


Introduction

This document describes the commands used to configure and monitor the following IP application services capabilities and features:

•Enhanced OBject Tracking (EOT)

•First Hop Redundancy Protocols (FHRP)

•ICMP Router Discovery Protocol (IRDP)

•IP Services

•IPv4 Broadcast Packet Handling

•Server Load Balancing (SLB)

•Stream Control Transmission Protocol (SCTP)

•Transmission Control Protocol (TCP)

•User Datagram Protocol (UDP)

•Web Cache Control Protocol (WCCP)

For IP application services configuration tasks and examples, refer to the Cisco IOS IP Application Services Configuration Guide.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products