Telnet Access over IPv6

Available Languages

Download Options

  • PDF     (117.8 KB)
    View with Adobe Reader on a variety of devices
Updated:January 29, 2013

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Telnet Access for IPv6

Contents

Telnet Access over IPv6

Last Updated: August 10, 2012

The Telnet client and server in the Cisco software support IPv6 connections.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Prerequisites for Telnet Access over IPv6

To enable Telnet access over IPv6 to a device, you must create a vty interface and password.

Information About Telnet Access over IPv6

Telnet Access over IPv6

The Telnet client and server in Cisco software support IPv6 connections. A user can establish a Telnet session directly to the device using an IPv6 Telnet client, or an IPv6 Telnet connection can be initiated from the device. A vty interface and password must be created in order to enable Telnet access to an IPv6 device.

How to Enable Telnet Access over IPv6

Enabling Telnet Access to an IPv6 Device and Establishing a Telnet Session

SUMMARY STEPS

1.    enable

2.    configure terminal

3.    ipv6 host name [port] ipv6-address

4.    line [aux | console | tty | vty] line-number [ending-line-number]

5.    password password

6.    login [local | tacacs]

7.    ipv6 access-class ipv6-access-list-name {in | out]

8.    telnet host [port] [keyword]


DETAILED STEPS
  Command or Action Purpose
Step 1
enable


Example:

Device> enable

 

Enables privileged EXEC mode.

  • Enter your password if prompted.
 
Step 2
configure terminal


Example:

Device# configure terminal

 

Enters global configuration mode.

 
Step 3
ipv6 host name [port] ipv6-address


Example:

Device(config)# ipv6 host cisco-sj 2001:DB8:20:1::12

 

Defines a static hostname-to-address mapping in the hostname cache.

 
Step 4
line [aux | console | tty | vty] line-number [ending-line-number]


Example:

Device(config)# line vty 0 4

 

Creates a vty interface.

 
Step 5
password password


Example:

Device(config)# password hostword

 

Creates a password that enables Telnet.

 
Step 6
login [local | tacacs]


Example:

Device(config)# login tacacs

 

(Optional) Enables password checking at login.

 
Step 7
ipv6 access-class ipv6-access-list-name {in | out]


Example:

Device(config)# ipv6 access-list hostlist

 

(Optional) Adds an IPv6 access list to the line interface.

  • Using this command restricts remote access to sessions that match the access list.
 
Step 8
telnet host [port] [keyword]


Example:

Device(config)# telnet cisco-sj

 

Establishes a Telnet session from a device to a remote host using either the hostname or the IPv6 address.

  • The Telnet session can be established to a device name or to an IPv6 address.
 

Configuration Examples for Telnet Access over IPv6

Examples: Enabling Telnet Access to an IPv6 Device

The following examples provide information on how to enable Telnet and start a session to or from an IPv6 device. In the following example, the IPv6 address is specified as 2001:DB8:20:1::12, and the hostname is specified as cisco-sj. The show host command is used to verify this information. 

Device# configure terminal
Device(config)# ipv6 host cisco-sj 2001:DB8:20:1::12
Device(config)# end
Device# show host
Default domain is not set
Name/address lookup uses static mappings
Codes:UN - unknown, EX - expired, OK - OK, ?? - revalidate
       temp - temporary, perm - permanent
       NA - Not Applicable None - Not defined
Host                 Port  Flags      Age Type   Address(es)
cisco-sj             None  (perm, OK)  0  IPv6 2001:DB8:20:1::12

To enable Telnet access to a device, create a vty interface and password: 

Device(config)# line vty 0 4
password lab
login

To use Telnet to access the device, you must enter the password: 

Device# telnet cisco-sj
Trying cisco-sj (2001:DB8:20:1::12)... Open
User Access Verification
Password:
cisco-sj
.
.
.
verification

It is not necessary to use the telnet command. Specifying either the hostname or the address is sufficient, as shown in the following examples: 

Device# cisco-sj

or 

Device# 2001:DB8:20:1::12

To display the IPv6 connected user (line 130) on the device to which you are connected, use the show users command: 

Device# show users
    Line       User       Host(s)              Idle       Location
*  0 con 0                idle                 00:00:00
 130 vty 0                idle                 00:00:22   8800::3

Note that the address displayed is the IPv6 address of the source of the connection. If the hostname of the source is known (either through a domain name server [DNS] or locally in the host cache), then it is displayed instead: 

Device# show users
    Line       User       Host(s)              Idle       Location
*  0 con 0                idle                 00:00:00
 130 vty 0                idle                 00:02:47   cisco-sj

If the user at the connecting device suspends the session with ^6x and then enters the show sessions command, the IPv6 connection is displayed: 

Device# show sessions
Conn Host                Address              Byte  Idle Conn Name
*  1 cisco-sj 2001:DB8:20:1::12      0     0 cisco-sj

The Conn Name field shows the hostname of the destination only if it is known. If it is not known, the output might look similar to the following: 

Device# show sessions
Conn Host                Address              Byte  Idle Conn Name
*  1 2001:DB8:20:1::12 2001:DB8:20:1::12      0     0 2001:DB8:20:1::12

Additional References

Related Documents

Related Topic Document Title

IPv6 addressing and connectivity

IPv6 Configuration Guide

Cisco IOS commands

Cisco IOS Master Commands List, All Releases

IPv6 commands

Cisco IOS IPv6 Command Reference

Cisco IOS IPv6 features

Cisco IOS IPv6 Feature Mapping

Standards and RFCs

Standard/RFC Title

RFCs for IPv6

IPv6 RFCs

MIBs

MIB

MIBs Link

No new or modified MIBs are supported by this feature, and support for existing MIBs has not been modified by this feature.

To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs

Technical Assistance

Description Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for Telnet Access over IPv6

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Table 1 Feature Information for Telnet Access over IPv6
Feature Name Releases Feature Information

Telnet Access over IPv6

12.2(2)T

12.2(18)SXE

12.2(25)SEA

12.2(25)SG

12.2(33)SRA

15.0(2)SG

Cisco IOS XE Release 2.1

Cisco IOS XE Release 3.2SG

Telnet access over IPv6 is supported.

The following commands were introduced or modified: ipv6 access-class, ipv6 host.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2012 Cisco Systems, Inc. All rights reserved.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products