Available Languages

Updated:September 29, 2025

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

ZTE Zenic One R22 Adapter

General information

Controller name: ZTE Zenic One R22 (TAPI) Controller

Vendor: ZTE ZENIC

Controller version: ZTE_R22V16_25_20

HCO version: 11.0

Adapter version: 11.0.x

Adapter release date:

Use cases

· Inventory discovery - yes

· Topology discovery - yes

· Service underlay discovery (LSP, tunnels) - no

· Service discovery - no

· Assurance - no

· Service provisioning – no

· Notification - no

· RON – no

Inventory

Details	Support	Additional information
Device types	ZXMP M721E ZXONE 9700E
Shelf	Yes
Cards	Yes
Ports	Yes
Fans	Yes	Identified by str FAN in equipment-type-name.
Power Supply	Yes	Identified by str PWG-DC in equipment-type-name.
Pluggable transceivers	Yes
Limitations
ROADM attribute is not populated due to missing data.
Name attribute of shelf, card and Port contains uuid str. This value comes from ZTE controller response with uuid format.
Model_number, serial_number, software_version, and part_number will be empty for some Inventory_items. Not mandatory attributes in TAPI standard.

Topology

Details	Support	Additional information
Optical Ports	Yes (OMS/MC/OCH/OTU/ODU/Eth/STM and SIP)
SIP	yes
Link	Yes (OMS/MC/OCH/OTU/ODU/Eth/STM)
Connection	Yes (OMS/MC/OCH/OTU/ODU/Eth/STM)
Limitations
NMC layer not supported as it is not supported in ZTE controller
OCh and OTU layers will be built from OTSi layer as ZTE TAPI does not report OCh and OTU layers separately.
Upper port, Lower port, and Path will be missing for few layers due to missing relations in controller response.

Services

Details	Support	Additional information
Service types	no
Service underlay	no
Cross domain services	no
Notifications	no
Protocol	TAPI
Data Model	JSON

Configuration

Parameter name	Description	Default value	Recommended
Adapter Properties
Enabled	Enable or disable the adapter.	False
Logging level	The logging level at which the discovery cycle is reported in the adapter log.	Info
Polling Cycle [Secs]	Poll every X seconds.	600 secs
Save persistor request to disc		Disabled
Server Configuration
Host	(http\|https)://<cas server> The Central Authentication Server host. For example: https://10.133.11.10
Port	The Central Authentication Server port.
Credentials	Credentials are defined in the “Credentials” tab of the Device Manager.
Timeout	The connection timeout.	300
Request Retries	The number of requests retries.	3
Maximum concurrent calls		3
Collection Parameters	Used to customize the collection of parameters that the adapter will use in a specific installation.
Enable Inventory Collection	Whether the inventory collection is enabled or disabled.	Disabled
Enable Topology Collection	Whether the topology collection is enabled or disabled.	Disabled
Controller Version		TAPI 2.1.3, ZTE_R22V16_24_20, ZTE_R22V16_25_20

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)

ZTE Zenic One R22 Adapters