Cisco SG350XG-2F10 12-Port 10GBase-T Stackable Managed Switch
Specifications Overview
| Series | Cisco 350X Series Stackable Managed Switches |
|---|---|
| Status | Orderable Buy |
| Release Date | 30-JUN-2015 |
| Product ID | |
-
Document Categories-
At-a-Glance
- Cisco 350X Series Stackable Managed Switches At-a-Glance (PDF - 385 KB)
- Cisco 350X Series Stackable Managed Switches At-a-Glance (Chinese) (PDF - 485 KB)
- Cisco 350X Series Stackable Managed Switches At-a-Glance (French) (PDF - 384 KB)
- Cisco 350X Series Stackable Managed Switches At-a-Glance (German) (PDF - 385 KB)
- Cisco 350X Series Stackable Managed Switches At-a-Glance (Italian) (PDF - 382 KB)
- Cisco 350X Series Stackable Managed Switches At-a-Glance (Spanish) (PDF - 384 KB)
-
Command References
-
Configuration Examples and TechNotes
- ARP Configuration on the SG350XG and SG550XG
- Access an SMB Switch CLI using SSH or Telnet
- Activate Traceroute Configuration on a Switch
- Assign an Interface VLAN as an Access or Trunk Port on a Switch
- Auto-Image Update for SG350XG and SG550XG Switches
- Auto-Numbering on the SG550XG and SG350XG Switches
- Backup and Restore or Swap Firmware on a Switch
- Bandwidth Configuration on the SG350XG and SG550XG Switches
- Bind Ingress or Egress Access Control List (ACL) on a Managed Switch
- CDP Settings on the SG350XG and SG550XG
- Chain and Ring Topologies on the SG550XG and SG350XG Switches
- Client Secure Shell (SSH) User Authentication for the SG350XG and SG550XG Switches
- Configure 802.1x Port Authentication Setting on a Switch
- Configure 802.1x Supplicant Credentials on a Switch
- Configure 802.1x Supplicant Credentials on a Switch through the CLI
- Configure Access Port Multicast TV Virtual Local Area Network (VLAN) Membership on a Switch
- Configure Bonjour Settings on a Switch
- Configure Bonjour Settings on a Switch through the CLI
- Configure CDP Settings on a Switch
- Configure CDP Settings on a Switch through the CLI
- Configure Customer Port Multicast TV Virtual Local Area Network (VLAN) Membership on a Switch
- Configure Customer Premises Equipment (CPE) to a Virtual Local Area Network (VLAN) on a Switch
- Configure DHCP Trusted Interface Settings on a Switch through the CLI
- Configure Device Authorization Control (DAC) Management through Smart Network Application (SNA)
- Configure Dynamic Host Configuration Protocol (DHCP) Image Upgrade Settings on a Switch
- Configure Dynamic Host Configuration Protocol (DHCP) Image Upgrade Settings on a Switch through the Command Line Interface (CLI)
- Configure Dynamic Host Configuration Protocol (DHCP) Relay Settings on a Switch through the Command Line Interface (CLI)
- Configure Dynamic Host Configuration Protocol (DHCP) Snooping and Relay Settings on your Switch
- Configure Dynamic Host Configuration Protocol (DHCP) Snooping on a Switch through the Command Line Interface (CLI)
- Configure Dynamic Host Configuration Protocol (DHCP) Trusted Interface Settings on a Switch
- Configure GVRP Settings on a Switch
- Configure GVRP Settings on a Switch through the CLI
- Configure Global 802.1x Properties on a Switch through the CLI
- Configure Global Green Ethernet Properties on a Switch
- Configure Global Green Ethernet Properties on a Switch through the Command Line Interface (CLI)
- Configure Global Link Layer Discovery Protocol (LLDP) Settings on a Switch through the Command Line Interface (CLI)
- Configure Green Ethernet Port Settings on a Switch
- Configure Green Ethernet Port Settings on a Switch through the Command Line Interface (CLI)
- Configure IGMP Snooping Settings on a Switch through the CLI
- Configure IPv6-based Access Control List (ACL) and Access Control Entry (ACE) on a Switch
- Configure IPv4 Management Interface on an SG350XG or SG550XG Switch through the CLI
- Configure IPv4 Static Routes Settings on a Switch
- Configure IPv4 Static Routes Settings on a Switch through the CLI
- Configure IPv4-based Access Control List (ACL) and Access Control Entry (ACE) on a Switch
- Configure Idle Session Timeout Settings on a Switch
- Configure Idle Session Timeout Settings on a Switch through the CLI
- Configure Initial Settings on a Switch using the Getting Started Wizard
- Configure Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) Snooping on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Network Policy Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Network Policy Settings on a Switch through the Command Line Interface (CLI)
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Port Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Port Settings on a Switch through the Command Line Interface (CLI)
- Configure Link Layer Discovery Protocol (LLDP) Port Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Port Settings on a Switch through the Command Line Interface (CLI)
- Configure Link Layer Discovery Protocol (LLDP) Properties on a Switch
- Configure MAC-Based Access Control List (ACL) and Access Control Entry (ACE) on a Managed Switch
- Configure MAC-based VLAN Groups on a Switch through the CLI
- Configure MLD Snooping Settings on a Switch through the CLI
- Configure Media Access Control (MAC)-Based Virtual Local Area Network (VLAN) Groups on a Switch
- Configure Media Access Control (MAC)-Based Virtual Local Area Network (VLAN) Groups to VLAN on a Switch
- Configure Multicast Properties on a Switch
- Configure Multicast Properties on a Switch through the CLI
- Configure Multicast TV Group to Virtual Local Area Network (VLAN) on a Switch
- Configure Multiple Spanning Tree Protocol (MSTP) on a Switch
- Configure Option 125 on a Server to Allow Dynamic Host Configuration Protocol (DHCP) Auto Image Updates on a Switch
- Configure Password Settings on a Switch through the Command Line Interface (CLI)
- Configure Password Strength and Complexity Settings on the Switch
- Configure Port Settings to Optimize Traffic Flow on a Switch
- Configure Port Virtual Local Area Network (VLAN) Membership of an Interface on a Switch
- Configure Port to VLAN Interface Settings on a Switch through the CLI
- Configure Port to Virtual Local Area Network (VLAN) Settings on a Switch
- Configure Private VLAN Membership Settings on a Switch through the CLI
- Configure Private Virtual Local Area Network (VLAN) Settings on a Switch
- Configure Protocol-based VLAN Groups on a Switch through the CLI
- Configure Remote Authentication Dial-In User Service (RADIUS) Server Settings on a Switch
- Configure Remote Log Server on a Switch
- Configure Remote Network Monitoring (RMON) Alarms on a Switch
- Configure Remote Network Monitoring (RMON) Alarms on a Switch through the Command Line Interface (CLI)
- Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch
- Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
- Configure Remote Network Monitoring (RMON) History Control Settings on a Switch
- Configure Remote Network Monitoring (RMON) History Control Settings on a Switch through the Command Line Interface (CLI)
- Configure Remote Switch Port Analyzer (RSPAN) Settings on the Network
- Configure Routing Resources on the Switch
- Configure Routing Resources on the Switch through the CLI
- Configure SNMP Notification Recipients on a Switch through the CLI
- Configure SSH Server Authentication Settings on a Switch through the CLI
- Configure STP Settings on a Switch through the CLI
- Configure Secure Shell (SSH) Server Authentication Settings on a Switch
- Configure Secure Shell (SSH) User Authentication Settings on a Switch
- Configure Simple Network Management Protocol (SNMP) Communities on a Switch
- Configure Simple Network Management Protocol (SNMP) Groups on a Switch
- Configure Simple Network Management Protocol (SNMP) Groups on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) Notification Filter on a Switch
- Configure Simple Network Management Protocol (SNMP) Notification Recipients on a Switch
- Configure Simple Network Management Protocol (SNMP) Trap Settings on a Switch
- Configure Simple Network Management Protocol (SNMP) Users on a Switch
- Configure Simple Network Management Protocol (SNMP) Users on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) View on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) Views on a Switch
- Configure Simple Network Time Protocol (SNTP) Authentication Settings on a Switch
- Configure Simple Network Time Protocol (SNTP) Authentication Settings on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Time Protocol (SNTP) Settings on a Switch
- Configure Simple Network Time Protocol (SNTP) Settings on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Time Protocol (SNTP) Unicast Server Settings on a Switch
- Configure Smart Network Application (SNA) Services Settings
- Configure Smartport Properties on a Switch through the CLI
- Configure Spanning Tree Protocol (STP) on a Switch
- Configure Stack Settings on a Switch through the Command Line Interface (CLI)
- Configure Stack Settings on an SG350X Switch
- Configure Subnet-Based Virtual Local Area Network (VLAN) Groups on a Switch
- Configure Subnet-Based Virtual Local Area Network (VLAN) Groups to VLAN on a Switch
- Configure Subnet-based VLAN Groups on a Switch through the CLI
- Configure System Time Settings on a Switch
- Configure System Time Settings on a Switch through the Command Line Interface (CLI)
- Configure Telephony Organizationally Unique Identifiers (OUI) Interface Settings on a Switch
- Configure Telephony Organizationally Unique Identifiers (OUI) Settings on a Switch
- Configure Time Range Settings on a Switch
- Configure Time Range Settings on a Switch through the Command Line Interface (CLI)
- Configure Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) Service Settings on a Switch
- Configure User Accounts to Enhance Security on a Cisco Smart or Managed Switch
- Configure VLAN Interface IPv4 Address on an Sx350 or SG350X Switch
- Configure VLAN Interface IPv4 Address on an Sx350 or SG350X Switch through the CLI
- Configure VLAN Interface Settings on a Sx350, SG350X, or Sx550X Switch
- Configure VLAN Mapping on a Switch
- Configure VLAN Mapping on a Switch through the CLI
- Configure Virtual Local Area Network (VLAN) Interface Settings on an Sx350, SG350X, or Sx550X Switch
- Configure Virtual Local Area Network (VLAN) Protocol-Based Groups to VLAN on a Switch
- Configure Virtual Local Area Network (VLAN) Settings on a Switch via VLAN Configuration Wizard
- Configure Voice Virtual Local Area Network (VLAN) Properties on a Switch
- Configure a VLAN Protocol-Based Group on a Switch
- Configure a VLAN on a Switch
- Configure the Internet Protocol (IP) Address Settings on a Switch through the Command Line Interface (CLI)
- Configure the Link Flap Prevention Settings on a Switch through the CLI
- Configure the PNP Settings on a Switch
- Configure the PnP Settings on a Switch through the CLI
- Configure the UDLD Settings on a Switch
- Configure the UDLD Settings on a Switch through the CLI
- Configuring Bonjour on the SG350XG and SG550XG
- Configuring CoS Settings on the SG350XG and SG550XG Switches
- Configuring Energy Usage Settings on the SG550XG and SG350XG
- Configuring LAG Settings on a Switch through the Command Line Interface (CLI)
- Configuring Link Aggregation Groups on the SG350XG and SG550XG
- Configuring MAC-Based Authentication on a Switch
- Configuring MAC-Based Authentication on a Switch through the Command Line Interface
- Configuring STP Interface Settings on the SG350XG and SG550XG
- Configuring STP Status & Global Settings on the SG350XG and SG550XG
- Configuring Smartports on the SG350XG and SG550XG
- Configuring the IPv4 Management Interface on SG350XG and SG550XG Switches
- Creating a text file to adjust IP settings on a switch
- Dynamic VLAN Assignment and Auto Smartport Configuration on a SG350X and SG550X
- Enable Loopback Detection on a Switch through CLI
- How to Import Certificate on Sx350 and Sx550X Series Switches
- Manage Interface Statistics on a Switch
- Manage Remote Network Monitoring (RMON) Statistics on a Switch
- Manage User-Defined Tags in the Smart Network Application (SNA) on your Switch
- Manage the Link Layer Discovery Protocol (LLDP) Neighbor Information on a Switch
- Master Backup on the SG550XG and SG350XG Switches
- Monitor and Customize Dashboard View on a Switch
- Monitoring Dynamic MAC Addresses on Cisco Managed Switches
- Network Discovery and Management via FindIT
- Optimize Internet Small Computer System Interface (iSCSI) Traffic on a Switch
- Rebooting and Resetting to Factory Defaults on the SG550XG and SG350XG
- Setting Static IPv4 Address on a Switch via CLI
- Setting static IPv4 address on a switch using GUI
- Smart Network Application (SNA) Overlay View
- Smart Network Application (SNA) Right-Hand Information Panel View
- Smart Network Application (SNA) Topology View
- Static Numbering or Manual Unit ID Assignment on the SG550XG and SG350XG Switches
- Switches Glossary of Terms
- View Power over Ethernet (PoE) Statistics and Power Savings of the 350X and 550X Series Managed Switches
-
Data Sheets
- Cisco 350X Series Stackable Managed Switches Data Sheet
- Cisco 350X Series Stackable Managed Switches Data Sheet (Chinese) (PDF - 812 KB)
- Cisco 350X Series Stackable Managed Switches Data Sheet (French) (PDF - 836 KB)
- Cisco 350X Series Stackable Managed Switches Data Sheet (German) (PDF - 830 KB)
- Cisco 350X Series Stackable Managed Switches Data Sheet (Italian) (PDF - 866 KB)
- Cisco 350X Series Stackable Managed Switches Data Sheet (Spanish) (PDF - 823 KB)
-
End-of-Life and End-of-Sale Notices
-
Install and Upgrade Guides
- Cisco 350X Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (English) (PDF - 974 KB)
- Cisco 350X Series Stackable Managed Switches Quick Start Guide (PDF - 911 KB)
- Cisco 350XG Stackable Managed Switches Quick Start Guide (PDF - 1 MB)
- Cisco 350XG Stackable Managed Switches Quick Start Guide (Hebrew) (PDF - 545 KB)
- RCSI-0348-book (PDF - 3 MB)
- RCSI-0343-book (PDF - 3 MB)
- RCSI-0001-book (PDF - 1 MB)
- Regulatory Compliance and Safety Information—Cisco 350X Series Managed Switches (PDF - 4 MB)
-
Licensing Information
-
Maintain and Operate Guides
- Cisco 350, 350X and 550X Series Managed Switches Administration Guide, Firmware Release 2.4 (PDF - 9 MB)
- Cisco 350, 350X and 550X Series Managed Switches Administration Guide, Firmware Release 2.4.5.x (PDF - 6 MB)
- Cisco 350, 350X, and 550X Series Managed Switches Administration Guide Firmware Version 2.3 (PDF - 9 MB)
- Cisco 350, 350X, and 550X Series Switches Administration Guide Firmware Version 2.2.5.x (PDF - 8 MB)
-
Release Notes
- Open Source Used In 250, 350, 350X, and 550X Series Switches 2.4.5.x (PDF - 1 MB)
- Open Source Used In Cisco 350XG and 550XG Series Switches Firmware Version 2.2.0.x (PDF - 986 KB)
- Open Source Used In Cisco 350XG and 550XG Series Switches Firmware Version 2.1.0 (PDF - 883 KB)
- Open Source Used In Cisco 350XG and 550XG Series Switches Firmware Version 2.0.0.x (PDF - 882 KB)
- Open Source Used In Cisco 250, 350, 350X and 550X Series Switches 2.4.0.x. (PDF - 933 KB)
- Open Source Used In Cisco 250, 350, 350X and 550X Series Switches Firmware Version 2.3.0.x (PDF - 994 KB)
- Open Source Used In Cisco Sx10G Series Switches 1.4.9.x (PDF - 808 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.3.5.63 (PDF - 133 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.3.0.130 (PDF - 135 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.2.8.04 (PDF - 99 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.2.7.07 (PDF - 100 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.2.5.68 (PDF - 103 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.2.0.66 (PDF - 94 KB)
- Release Notes for 250, 350, 350X, and 550X Series Switches Software Version 2.2.0.63 (PDF - 95 KB)
- Release Notes for 250, 350, SG350XG, and SG550XG Series Switches Software Version 2.1.0 (PDF - 93 KB)
- Release Notes for Cisco 350 and 550 Switches, Firmware Version 2.0.0.73 (PDF - 68 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.5.0.90
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.5.0.90 (PDF - 230 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.5.0.83 (PDF - 173 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.5.0.82 (PDF - 171 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.5.0.79 (PDF - 219 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.5.0.78 (PDF - 163 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.4.5.71 (PDF - 149 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.4.0.94. (PDF - 141 KB)
- Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/550XG, SX350X, SX550X Series Switches Software Version 2.4.0.91 (PDF - 145 KB)
-
Translated End-User Guides
- Cisco 350 Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (Portuguese) (PDF - 942 KB)
- Cisco 350 Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (Russian) (PDF - 1 MB)
- Cisco 350, 350X and 550X Series Managed Switches Administration Guide, Firmware Release 2.4 - French (PDF - 13 MB)
- Cisco 350, 350X and 550X Series Managed Switches Administration Guide, Firmware Release 2.4 - Japanese (PDF - 13 MB)
- Cisco 350X Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (French) (PDF - 945 KB)
- Cisco 350X Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (German) (PDF - 944 KB)
- Cisco 350X Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (Italian) (PDF - 936 KB)
- Cisco 350X Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (Spanish) (PDF - 943 KB)
- Cisco 350X Series Stackable Managed Switches Quick Start Guide (Multilingual) (PDF - 3 MB)
- Cisco 350X Series Stackable Managed Switches Quick Start Guide (Trilingual) (PDF - 1 MB)
- Cisco 350XG Series 10G Stackable Managed Switches Quick Start Guide (French) (PDF - 1 MB)
- Cisco 350XG Series 10G Stackable Managed Switches Quick Start Guide (German) (PDF - 1 MB)
- Cisco 350XG Series 10G Stackable Managed Switches Quick Start Guide (Portuguese) (PDF - 1 MB)
- Cisco 350XG Series 10G Stackable Managed Switches Quick Start Guide (Russian) (PDF - 1 MB)
- Cisco 350XG Series 10G Stackable Managed Switches Quick Start Guide (Spanish) (PDF - 1 MB)
-
Troubleshooting TechNotes
- Cannot Add a New Switch to an Existing Stack
- How to Copper Test a Port on a Switch
- How to Copper Test a Port on a Switch through the Command Line Interface (CLI)
- SG350X, SG550XG: Stack Slave Stuck when Unit is Disconnected then Reconnected
- SG350X, Sx550X: RSPAN Mirrored Packet Loss when Forwarding
- SG350X, Sx550X: Unable to Change XG Port Settings on a Switch
- SG350X: Egress Traffic Shaping on XG Device Uplink Interfaces Limits Traffic to 80 Kbps
- SG350X: Running Cable Test Via The "Test Cable-Diagnostics Tdr" Command May Provide Unpredictable Results
- SG350X: The 6to4 Tunnel Traffic is not Forwarded in Line Rate
- SG350XG Cannot Download Firmware and Configure File
- SG350XG, Sx550X: The Switch Does Not Recognize a USB Flash Drive
- SG350XG: Cannot View SNA Network Topology using IPv6 Address on a Windows 10 Edge
- SG350XG: Configuring DAC Fails on a Switch with Pre-configured 802.1X and RADIUS Settings
- SG350XG: Device Does Not Join the Stack After Reload when Changing from Set ID to Auto Unit ID
- SG350XG: Disabling CDP or LLDP May Cause PoE Negotiation to Fail
- SG350XG: PVID is Enabled when Interface Membership Type is Set to Forbidden
- SG350XG: Packet Size is Calculated Based on the Ingress Packet Size
- SG350XG: PoE Consumption Values for Hours, Days, and Weeks Show 0
- SG350XG: Port LEDs Turn Off when LAG Flow Control is Enabled
- SG350XG: Ports Connected to a PD Display Lower Voltage than the Actual
- SG350XG: Show Queue Statistics Command May Display Incorrect Information
- SG350XG: Some Functions in the Web-based Utility are not Responding
- SG350XG: Success Prompt Appears Before the Operation is Completed
- SG350XG: Web Browser Freezes when SNA is Left Open for a Long Time
- Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports
- Using Ping and Traceroute on the SG550XG and SG350XG
-
White Papers
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (PDF - 226 KB)
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (Chinese) (PDF - 297 KB)
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (French) (PDF - 263 KB)
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (German) (PDF - 246 KB)
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (Italian) (PDF - 256 KB)
- Introducing the Next Generation of Cisco Switches for Small and Midsize Business Transition Guide (Spanish) (PDF - 258 KB)
- Introducing the Next-Generation Cisco 10 Gigabit Ethernet Switches for Small Business
Contact Cisco
Technical Support
- Open a TAC Case Online
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
Technical Sales Questions
- Contact Us for Sales Questions
- Call 1 800 553 6387
- US/CAN | 5am - 5pm Pacific
- Other Countries
Cisco Services
-
Feedback