SG350XG: Device Does Not Join the Stack After Reload when Changing from Set ID to Auto Unit ID

Available Languages

Download Options

  • PDF     (3.8 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (50.3 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (68.9 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB5805

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

SG350XG: Device Does Not Join the Stack After Reload when Changing from Set ID to Auto Unit ID

Date Identified

May 23, 2017

Date Resolved

September 8, 2017

Products Affected

Model

Firmware Version

Fixed In

SG350X

2.2.0.x

2.3.5.63

Problem Description

In some cases, if the unit-ID setting of a unit in a stack is changed from set ID to auto ID, the device does not join the stack after reload.

Resolution

This issue is fixed when you upgrade to the firmware version 2.3.5.63. To upgrade, click here for instructions.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco