Using the Administration Control Panel
for Cisco Unified Communications Manager (CUCM)

Perform the following task from the Administration Control Panel window:

Switching the Call Agent to Cisco Unified Communications Manager Express

Use this procedure to switch the call agent to Cisco Unified Communications Manager Express.


Step 1blank.gif Choose Administration > Control Panel.

Step 2blank.gif Under the Call Agent Integration: CUCM label, click Switch to CUCME.

A warning box appears indicating:

“Warning: This operation will
a. permanently delete all non-local site related configuration
b. reboot the system automatically
Do you wish to continue?

Step 3blank.gif Click Ok to switch to Cisco Unified Communications Manager Express or click Cancel.


 

To save or reload Cisco Unity Express, see Saving or Reloading Cisco Unity Express.

Saving or Reloading Cisco Unity Express

note.gif

Noteblank.gif Tis operation takes a few moments to complete.


Use this procedure to save or reload Cisco Unity Express.


Step 1blank.gif Choose Administration > Control Panel.

Step 2blank.gif Click Save Configuration.

Step 3blank.gif Click Ok at the prompt.

Step 4blank.gif Click Reload Cisco Unity Express. A dialog box appears warning you that reloading the system will terminate all end user sessions and that any unsaved configuration data will be lost.

Step 5blank.gif Click Ok or Cancel to complete the task.


 

To switch the call agent to Cisco Unified Communications Manager Express, see Switching the Call Agent to Cisco Unified Communications Manager Express.