Configure Barge
The single button barge/cBarge, barge, privacy, and privacy on hold features work with each other. These features work with only shared lines.
Barge adds a user to a call that is in progress. Pressing a softkey or feature button automatically adds the user (initiator) to the shared-line call (target), and the users currently on the call receive a tone (if configured). Barge supports built in conference and shared conference bridges.
The single button barge/cBarge feature allows the user to simply press the shared-line button to be added to the call. The single button barge/cBarge feature supports built in conferences and shared conference bridges.
Perform the following steps to configure the barge feature with built in conference bridge.
Procedure
Step 1 |
Assign the Standard User or Standard Feature softkey template (both contain the barge softkey) to each device that accesses barge by using the built in conference bridge. |
Step 2 |
Set the following optional Cisco CallManager service parameters: |
Step 3 |
In the End User Configuration window for each user that is allowed to access the barge with built-in conference bridge feature, associate the device that has the barge softkey template that is assigned to it. |
Step 4 |
Notify users that the barge feature is available. |