Cisco Catalyst SD-WAN Network Configuration Guide, Releases 26.x and Later

PDF

Configure tracker group using a configuration group

Updated: April 24, 2026

Want to summarize with AI?

Log in

Guides through the process of configuring tracker groups using configuration groups, offering step-by-step instructions to establish route tracking associations for improved failover and network resilience.

Before you begin

On the Configuration > Configuration Groups page, choose SD-WAN as the solution type.

Procedure

1.

From the Cisco SD-WAN Manager menu, choose Configuration > Configuration Groups.
2.

Create and configure a tracker group in a Service Profile.

Table 1. Tracker Group

Field

Description

Tracker Elements*

This field is displayed only if you chose Tracker Type as the Tracker Group. Add the existing interface tracker names, separated with a space. When you add this tracker to the template, the tracker group is associated with these individual trackers, and you can then associate the tracker group to an interface.

Tracker Boolean

This field is displayed only if you chose Tracker Type as the Tracker Group. Select AND or OR.

OR is the default boolean operation. An OR ensures that the transport interface status is reported as active if either one of the associated trackers of the tracker group reports that the interface is active.

If you select the AND operation, the transport-interface status is reported as active if both the associated trackers of the tracker group report that the interface is active.

What to do next

Also see Deploy a configuration group.