Outlines Layer 2 VPN capabilities in Cisco Catalyst SD-WAN environments, including feature history, supported platforms, deployment methods with CLI templates, configuration tasks for point-to-point and point-to-multipoint topologies, operational restrictions, and CLI-based verification and monitoring procedures.
Feature history for L2VPN
Details the chronological development and enhancements of Layer 2 VPN features, providing a historical perspective on capability additions and changes.
Layer 2 VPNs within the SD-WAN overlay network
Explains Layer 2 VPN integration within the Cisco Catalyst SD-WAN overlay network, covering architecture, support models, and interoperability considerations.
Supported platforms for Layer 2 VPN
Lists platforms compatible with Layer 2 VPN, describing hardware and software requirements for successful deployment in Cisco Catalyst SD-WAN environments.
Restrictions for Layer 2 VPN
Outlines operational limitations, deployment restrictions, and unsupported features associated with Layer 2 VPN to inform optimal usage and prevent configuration issues.
Methods to configure Layer 2 VPN using CLI template
Describes available CLI template methods for configuring Layer 2 VPN, emphasizing automation approaches and recommended practices for network deployment.
Configure a Layer 2 VPN on a Cisco IOS XE Catalyst SD-WAN device using CLI template
Provides step-by-step instructions to configure Layer 2 VPNs on Cisco devices using CLI templates for efficient service provisioning.
Configure a point-to-point Layer 2 VPN using CLI template
Guides configuration of point-to-point Layer 2 VPNs using CLI templates, including procedures for setting up edge routers at Site A and Site B to establish connectivity.
Configure a point-to-multipoint Layer 2 VPN using CLI template
Explains configuration workflows for point-to-multipoint Layer 2 VPNs via CLI templates, detailing steps for edge routers at sites A, B, and C to support multipoint connectivity.
Configure a Layer 2 VPN Switchport using CLI template
Provides instructions to configure switchports for Layer 2 VPN services using CLI templates to enable robust edge device connectivity.
Methods to verify Layer 2 VPN using CLI
Describes methods and CLI commands to verify Layer 2 VPN status, ensuring correct configuration and operational integrity.
Monitor configured layer 2 VPN using CLI
Introduces CLI-based monitoring techniques for configured Layer 2 VPNs, enabling administrators to assess ongoing operational status and performance.