Describes how to monitor wireless configuration on Cisco ISR 1000 series routers for effective oversight and maintenance.
Use this procedure to monitor the wireless settings configured on your Cisco ISR 1000 series routers using Cisco SD-WAN Manager. This allows you to verify the operational status of your wireless LAN, including radio parameters, SSID information, and connected clients.
After configuring wireless management, it is essential to monitor the operational status to ensure that the settings have been applied correctly and the wireless network is functioning as expected. Cisco SD-WAN Manager provides real-time monitoring capabilities for this purpose.
Before you begin
-
Wireless management must be configured and deployed on the Cisco ISR 1000 Series Router.
-
You must have access to Cisco SD-WAN Manager with appropriate monitoring permissions.
Follow these steps to monitor the wireless configuration using Cisco SD-WAN Manager:
Procedure
| 1. | From the Cisco SD-WAN Manager menu, navigate to Monitor > Network. |
|||||||||
| 2. | Choose a router from the list of the routers. |
|||||||||
| 3. | Click Real Time in the left pane. |
|||||||||
| 4. | From the Device Options drop-down list, choose one of the following options:
|
Upon selecting a device option, the real-time data for the chosen wireless aspect (Radio, SSID, or Clients) is displayed, providing insight into the current state of the wireless configuration on the selected Cisco ISR 1000 Series Router.