Cisco Catalyst SD-WAN Control Components and Device Management Guide, Releases 26.x and Later

PDF

Configure Cisco SD-WAN Manager data storage

Want to summarize with AI?

Log in

Describes how to configure the storage space to allocate for different categories of network-related data that SD-WAN Manager stores.


Configuring the storage space to allocate for different categories of network-related data that SD-WAN Manager stores.

Procedure

1.

From the SD-WAN Manager menu, choose Administration > Settings.

2.

Select the Statistics Database Configuration section to view the maximum space available for the database.

3.

For each field in the Statistics Type column, assign the amount of storage to be allocated, in gigabytes (GB). The total value of all the fields cannot exceed the maximum available space.

Table

Description

Approute

Index Name: approutestatsstatistics

SDWAN Tunnel SLA, which is used to Calculate Tunnel SLA

- Aggregated SAIE

Index Name: aggregatedappsdpistatistics

Aggregated application data for certain edges and interfaces. this is used to calculate application usage for certain site/device

Audit Log

Audit Log

vnf statistics

Service Chain Health Statistics data for Clouddock

Firewall

Firewall rule and counters

IPS Alert

Intrusion Prevention System, which is used to Monitors network traffic and analyzes against a defined rule set.

CloudExpress

Cloud onRamp

AppHosting

Alarm

Alarms

Performance Monitor

Application Performance, this is used to measure performance of each application and site.

NWPI

Network wide path insight trace, flow, packet, aggregation and task data

umts-monitoring

Underlay network performance measurement

URLF

URL filtering allows you to control access to Internet websites by permitting or denying access to specific websites based on information contained in an URL list

Bridge Interface

Cisco vEdge devices bridge interface rx/tx statistics

Device Events

Events received from devices

EIO

EIO module 3G/4G/5G statistics

Device Configuration

Device Running Configuration

Interface

Device Interface Table

Wlan Client Info

UtdDaqIox

Speed Test

Speed Test Record

BridgeMac

Cisco vEdge device per interface/mac address rx/tx statistics

Device System Status

Device System Status including CPU, memory, disk etc

umts-event-tunnel-sla-change

underlay performance measurement triggered by tunnel SLA changes.

QoS

statistics/counters of each interface queues.

Tracker Statistics

Endpoint Tracker SLA metrics

Sleofflinereport

Flow Log

Flowlog feature(should be applicable for Cisco vEdge devices only)

DeviceHealth

Device Health Table

Umbrella

Umbrella Integration feature enables cloud-based security service by inspecting the Domain Name System (DNS) query that is sent to the DNS server through the device.

Network-wide Packet Insight (raw)

NWPI raw data storage

umts-event-tunnel-pmtu-change

Underlay performance measurement triggered by tunnel path MTU changes.

Security Unified Logging

This feature supports Unified Logging which is used to capture information about connection events across different security features at different stages during policy enablement and execution.

With Unified Logging, you can have visibility to the log data for Zone-based Firewall and for Unified Threat Defense features such as IPS,

URL-F and AMP to understand what traffic, threats, sites or malware were blocked, and the rules that blocked the traffic or sessions with the associated port, protocol or applications.

Additionally, this feature also provides support for On-Demand Troubleshooting. On-Demand troubleshooting allows a user to view the connection events of different flows of traffic from a device within a configured period of time.

SiteHealth

Site Health Table

Artstatistics

UMTS Rest Event

Underlay performance measurement triggered by other events except tunnel SLA change and Path MTU changes.

SAIE

Raw DPI record, per IP flow tx/rx counters.

Aggregated Tunnel SLA

approutestatsstatistics_routing_summary

Aggregated 24 hours SLA for each tunnel

Aggregated Tunnel SLA

approutestatsstatistics_transport_summary

Aggregated 24 hours SLA for each color combination

4.

Select Save.

SD-WAN Manager updates the storage allocations that you have assigned once a day, at midnight.