Describes the details of Cisco SD-AVC's being pre-installed from 20.3.1 and pre-enabled from 20.18.1.
Cisco SD-AVC is pre-installed from 20.3.1 and pre-enabled from 20.18.1. The details are described here.
Pre-installed from 20.3.1
Installing or upgrading to Cisco vManage Release 20.3.1 or later automatically includes installation of Cisco SD-AVC as a component.
Enabled by default from 20.18.1
From SD-WAN Control Components 20.18.1, the SD-AVC component is enabled by default in new Cisco Catalyst SD-WAN installations. The enablement applies to all Cisco SD-WAN Manager nodes.
Upgrading to 20.18.1 or later
If you upgrade an environment to SD-WAN Control Components 20.18.1 or later from earlier releases, SD-AVC is not necessarily enabled. The SD-AVC status before upgrade is preserved after upgrade. For example, if you have a 20.17.x installation, with SD-AVC disabled, and you upgrade to 20.18.1, SD-AVC remains disabled. This is true even though from 20.18.1, SD-AVC component is enabled by default in new installations.
Enable or disable in .