Provides the command and output for monitoring an HTTP CONNECT flow.
Provides the command and sample output used to monitor HTTP CONNECT on a device.
HTTP CONNECT flow monitoring
To monitor HTTP CONNECT on a device, use the following command. The following is an example output:
Device# show sdwan appqoe flow flow-id 4278327056727738
Flow ID: 4278327056727738
VPN: 1 APP: 0 [Client 192.0.2.0:49470 - Server 192.0.2.24:8080]
HTTP Connect: 1
TCP stats
---------
Client Bytes Received : 215
Client Bytes Sent : 46
Server Bytes Received : 208
Server Bytes Sent : 193
Client Bytes sent to SSL: 215
Server Bytes sent to SSL: 168
C2S HTX to DRE Bytes : 0
C2S HTX to DRE Pkts : 0
S2C HTX to DRE Bytes : 152
S2C HTX to DRE Pkts : 4
C2S DRE to HTX Bytes : 70
C2S DRE to HTX Pkts : 3
S2C DRE to HTX Bytes : 46
S2C DRE to HTX Pkts : 2
C2S HTX to HTTP Bytes : 0
C2S HTX to HTTP Pkts : 0
S2C HTX to HTTP Bytes : 0
S2C HTX to HTTP Pkts : 0
C2S HTTP to HTX Bytes : 0
C2S HTTP to HTX Pkts : 0
S2C HTTP to HTX Bytes : 0
S2C HTTP to HTX Pkts : 0
C2S SVC Bytes to SSL : 129
S2C SVC Bytes to SSL : 46
C2S SSL to TCP Tx Pkts : 6
C2S SSL to TCP Tx Bytes : 193
S2C SSL to TCP Tx Pkts : 2
S2C SSL to TCP Tx Bytes : 46
In this output, HTTP Connect: 1 indicates that the HTTP CONNECT request is successful.