Provides the command and output used to verify HTTP CONNECT configuration.
Provides the command and sample output used to verify HTTP CONNECT configuration.
HTTP CONNECT configuration verification
To verify the HTTP CONNECT configuration, use the following command. The following is a sample output from the command:
Device# show sslproxy statistics
==========================================================
SSL Proxy Statistics
==========================================================
Connection Statistics:
Total Connections : 3
Proxied Connections : 0
Non-proxied Connections : 3
Clear Connections : 0
Active Proxied Connections : 0
Active Non-proxied Connections : 2
Active Clear Connections : 0
Max Conc Proxied Connections : 0
Max Conc Non-proxied Connections : 2
Max Conc Clear Connections : 0
Tunneled Proxied Connections : 2
Tunneled Non-proxied Connections : 0
Active Tunneled Proxied Flows : 1
Active Tunneled Non-proxied Flows : 0
Max Conc Tunneled Proxied Flows : 1
Max Conc Tunneled Non-proxied Flows: 0
SSL Encrypted marked Non SSL Flows : 0
Total Closed Connections : 2In this output, Tunnel Proxied Connections and Tunneled Non-proxied Connections indicate that the HTTP CONNECT request is successful.