Information about external AppQoE service nodes, supported platforms, restrictions, deployment topologies, configuration procedures, monitoring, and CLI output.
Objective
This reference groups information about external AppQoE service nodes, including an overview, sample topologies, and deployment best practices.
Feature history for external AppQoE service nodes
Lists the features and enhancements that have been introduced for external AppQoE service nodes across different software releases.
External AppQoE service nodes
Explains how external AppQoE service nodes extend AppQoE services beyond an intercepting edge router and describes supported traffic and solution components.
External AppQoE service node topologies
Describes how service controllers and service nodes interact in an AppQoE cluster and shows a sample deployment topology.
Platforms that support AppQoE service controllers and external service nodes
Lists supported devices and software releases for AppQoE service controller and external service node roles.
Restrictions for external AppQoE service nodes
Lists the restrictions that apply to external AppQoE service nodes, service controllers, and their clusters.
Best practices for AppQoE service clusters
Lists practices for service node capacity, cluster IDs, and network MTU consistency.
Configure AppQoE service controllers and nodes in Cisco SD-WAN Manager
Creates Cisco SD-WAN Manager device templates for external AppQoE service nodes and service controllers.
Configure AppQoE using a configuration group
Configure AppQoE settings using the configuration group. From Cisco Catalyst SD-WAN Manager Release 20.14.1, AppQoE clusters support IPv6 traffic.
Configure AppQoE service controllers and nodes using the CLI
Configures external AppQoE service nodes and service controllers using CLI commands.
CLI configuration examples for AppQoE service controllers and nodes
Provides complete IPv4 and IPv6 CLI configuration examples for external AppQoE service nodes and service controllers.
AppQoE service controller monitoring
Describes how to verify device roles and monitor AppQoE service controller traffic, alarms, and events.
AppQoE service controller and node CLI output
Lists CLI commands and sample output for AppQoE service controllers, service nodes, and clusters.