Describes how to verify device roles and monitor AppQoE service controller traffic, alarms, and events.
Objective
Use this reference to verify device roles and monitor traffic and notifications for AppQoE service controllers.
Device role verification
Follow this procedure to verify the device role (service controller or service node) for a device after you configure the role using a device template.
-
From the Cisco SD-WAN Manager menu, choose .
-
Ensure that you are in the Device Templates area .
In Cisco vManage Release 20.7.1 and earlier releases Device Templates is called Device.
A list of available device templates is displayed.
-
Check the Device Role column for a device to know its role. SDWAN Edge implies that the device is configured as a service controller.
AppQoE service controller traffic monitoring
Alarms and Events
If a cluster isn't formed or is not operational, the device sends a notification to Cisco SD-WAN Manager. You can view such event notifications from the Monitor page of Cisco SD-WAN Manager. For some of these events, Cisco SD-WAN Manager also generates alarms. For information on how to view alarms and events for your devices, see Alarms, Events, and Logs