System Setup and Software Installation Guide for Cisco Optical Site Manager, IOS XR

PDF

Modify admin plane properties

Updated: March 2, 2026

Want to summarize with AI?

Log in

Overview

Use this task to modify admin plane properties so that you can update the required runtime settings for the deployment.

Use this task to modify Admin Plane properties.

Before you begin

Log in to the admin plane

Procedure

1.

Click Tools in the left panel and choose Properties.

The Properties page appears to display the admin plane properties, current values, and edited values.

Table 1. Properties table

Label

Description

Property

Displays the customizable admin plane properties

Current Value

Displays the current values of each admin plane property

Edited Value

This field is editable. Enter the values for the admin plane properties.
2.

To modify the values for the admin plane properties, perform one of the following actions:

Tip
When you hover over a property, a tooltip appears to explain the property purpose.

  • In Edited Value, enter the needed values for the properties that you want to customize.

  • Click Reset to default to restore the default settings for all the properties.
3.

Click Apply to apply the modified values.

A Warning! message appears.
4.

Click Continue.

A Success! message appears.
5.

Click OK.
6.

Restart the admin plane to commit the modified values in the properties files. See Reset the SVO card or restart the admin plane.

Modified properties are not automatically propagated to the peer server. Make the same changes on the peer server to align the properties files with the host server.

The modified admin plane property values are saved.