Provides the Cisco Optical Automation Solution workflow, including network planning, NCS 1000 device bringup, Cisco Optical Site Manager setup, Cisco Optical Network Controller operations, and live network import.
Deploy the Cisco Optical Automation Solution in Seven Steps
Introduces the Optical Automation Solution deployment workflow, including planning, device bringup, site management, controller operations, service provisioning, live network import, and network analysis.
Plan Your Network with Cisco Optical Network Planner
Describes how to plan an optical network with Cisco Optical Network Planner, including prerequisites, topology design, network analysis, Netconf file generation, and troubleshooting.
Bring Up Your NCS 1000 Devices
Explains NCS 1000 device bringup for the Optical Automation Solution, including hardware installation, initial configuration, validation, troubleshooting, and Cisco IOS XR software maintenance update procedures.
Manage Your Sites with Cisco Optical Site Manager
Introduces Cisco Optical Site Manager workflows, including installation, activation, onboarding models, device synchronization, authentication, smart licensing, software maintenance updates, and troubleshooting.
Operate Your Network with Cisco Optical Network Controller
Describes Cisco Optical Network Controller operations, including installation, upgrades, node onboarding, user management, circuit provisioning, alarms, workspaces, PM history, logs, and troubleshooting.
Import Your Live Network and Plan Future Expansion with Cisco Optical Network Planner
Describes live network import into Cisco Optical Network Planner by using Cisco Optical Network Controller, including import preparation, live network data transfer, and troubleshooting data collection.