Overview
Guides you through viewing rogue AP details on floor maps within Catalyst Center. Explains how to select specific floors, interpret threat level legends, and access detailed information such as MAC addresses, threat types, and containment status for rogue devices detected in your network..
You can view the precise location of all rogue APs and their threat levels on a floor map.
Before you begin
Ensure integration of Catalyst Center with Cisco Connected Mobile Experiences (CMX) and Cisco Spaces, so that Catalyst Center can determine the rogue AP location.Procedure
| 1. | From the main menu, choose . Alternatively, click the menu icon and choose . Select a floor and click the View Rogue link to open the Rogues on Map tab with the floor preselected. |
|
| 2. | From the left hierarchy tree, select a floor. If you select an area or building, a global map with rogue APs distribution is shown. You must select a floor to view the Rogue APs on the floor map. By default, All Threat Levels and Display Rogue AP MAC Address options are selected. The floor map shows the rogue APs detected on the selected floor in the past hour and the APs that detected them. Legends at the bottom of the map indicate the counts for High Threats, Potential Threats, and Information Threats. |
|
| 3. | Click the rogue skull icon to view details about the rogue AP:
When two or more rogue AP locations overlap or are very close, the map displays a stacked icon showing the total number of overlapping rogue APs. Click the rogue AP count in the map to see the MAC addresses of all overlapping rogue APs. Click a MAC address to view details about that rogue AP. |