Cisco Catalyst Center Rogue Management and aWIPS Application Quick Start Guide, Release 3.2.x

PDF

Edit an aWIPS profile

Updated: May 5, 2026

Want to summarize with AI?

Log in

Overview

Explains how to edit existing aWIPS profiles in Catalyst Center, including updating signature thresholds and saving changes. Details that updated configurations are automatically pushed to all assigned network devices and notes that the default aWIPS profile cannot be modified.

This procedure describes how to edit an aWIPS profile.

Before you begin

To add an additional subscription, you must disable and enable aWIPS from the Rogue and aWIPS overview dashboard. See Monitor the Rogue Management and aWIPS dashboard.

Procedure

1.

From the main menu, choose Assurance > Rogue and aWIPS > aWIPS Profile.
2.

In the aWIPS Profile(s) table, click the profile name that you want to edit.
3.

In the Edit aWIPS Profile window that opens, make the necessary changes and click Save.

Note

The default aWIPS profile cannot be edited.

After the profile saves, it pushes to all devices assigned to the aWIPS profile.

Note

In the Configure Threshold column for the selected aWIPS signature, if a threshold value outside the specified range is entered, an error message appears on the top of the Edit aWIPs Profile window requesting the correct value within the specified range.